Jump to content
SAU Community

Issues with compliance R32 GTR with T78

RTFGTR
 Share

Recommended Posts

aybee Experienced

aybee

Posted
Posted
These guys aren't stupid, they've worked in the auto industry for many years and usually know exactly what they're looking at.

its pretty funny that you say that, cause the guy that engineered my car had no idea about my turbo. the compliance guys convinced him that it was just the stock turbo on a different manifold. he must have been stupid cause he believed him and signed it off.

Vic Roads wasnt a problem either. The guy actually put his hand on the turbo when he was looking for the egine number. :rolleyes:

the only tricky thing is RWC...

.

predator Grand Master

predator

Posted
Posted

There are a lot of people that don't know their stuff, but then you will run into those that do. It only takes somebody that *does* along the way and you're in trouble. And things only get stricter each year. Seems to me you have about three options:

a) take it to another state and try and transfer the rego (two lots of rego, etc) and see if the engineers can be still valid.

B) remove the turbo and return it mostly to stock (probably best option).. although soon as you change it back the engineers is invalid, so is any insurance (including if you hit a person on the road), and you only have to get pulled over by a nice policeman in vic and you're back where you started.

c) pay off the right people ..

You don't have much other options to totally frank. VIC is *strict* - damn strict.. .on most things. Just remember when it comes to insurance the story will be exactly the same.

RTFGTR Proficient

RTFGTR

Posted
  • Author
Posted

Fark that...

RWC and engineering certificate will all be done in VIC. I have seen a few T78 big single modded R32's on the roads in VIC. It is possible and it will be done! I now have a few good options and I'm going to keep the keyboard quiet untill it's done. VIC is strict and even more so since unfortunate crash yesterday... heard that all cops were sent memo to book all "imports" with P plates (which will mean all imports get anal probes for the next month or so P's or not)

predator Grand Master

predator

Posted
Posted

there are a lot of illegitimate cars in melb.. many shouldn't be on the road according to any applicable law - but they are.. see point c) :)

also see point B) - if you get an EPA (very likely seeing as just about every VIC skyline owner has had one.. inc me when i was there).. and you will have to remove that turbo.. no two ways about it. And the EPA are the clueist people I have ever seen inspect a car - I guess if you see a few hundred skylines you tend to know what a completely stock one looks like.

ocean Rising Star

ocean

Posted
Posted
Fark that...

RWC and engineering certificate will all be done in VIC. I have seen a few T78 big single modded R32's on the roads in VIC. It is possible and it will be done! I now have a few good options and I'm going to keep the keyboard quiet untill it's done. VIC is strict and even more so since unfortunate crash yesterday... heard that all cops were sent memo to book all "imports" with P plates (which will mean all imports get anal probes for the next month or so P's or not)

Does anyone know of a decent but reasonably priced compliance workshop in melbourne? I have a GTR coming with 2xGT2530's.. One workshop wants over $1500 to compliance the car, which i cant help but feel is a bit expensive,

Any help would be greatly appreciated :)

-Patrick

RTFGTR Proficient

RTFGTR

Posted
  • Author
Posted
Does anyone know of a decent but reasonably priced compliance workshop in melbourne? I have a GTR coming with 2xGT2530's.. One workshop wants over $1500 to compliance the car, which i cant help but feel is a bit expensive,

Any help would be greatly appreciated :)

-Patrick

I only know of 2 and would recomend 1 - PM sent.

meggala Grand Master

meggala

Posted
Posted

you safest to conver to tiwins for reg and engineering I always try to comly and reg my cars as stock as possible and they tend to go through quickly . my record for compliance and sign off is 2 1/2 days on the rb25 cef rwc was easy with it as well. if you want to play wit the big boys ie t78 you need to pay

cheers

xqt00r Newbie

xqt00r

Posted
Posted

Basically you are registering the car if it were new, so it would have to comply with ADR of the day. In other words your car would have to be a stock GTR R32.

If they wanted they could nknock you back for steering wheel, gear knob etc, etc ,etc.

Trying to legally get a T78 engineered and approved was a bit of an ask, when most people keep egtting defected for having a BOV.

????

SteveL Mentor

SteveL

Posted
Posted
If they can engineer and register turbo conversions in dattos, I don't see how a big single on a TT RB26 in a GTR is a problem.

Couple of differences:

- the emissions regs on older cars (eg datsun 1600's) are nowhere near as strict as on cars like GTR's

- engineering a turbo conversion requires a lot more work on the engineers part than an inspection to meet 15yo requirements. For example a full brake test would be mandatory (brake performance/fade, etc). In this case I've got no doubt the engineer has seen the single turbo, realised the car is not standard to a greater extent than he would otherwise accept, and decided he'd rather not take the risk.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Trilbyte
      RB25 S2 Idles but doesn't want to rev

      By Trilbyte · Posted

      The 1000ccs are side feeds but they're not currently installed, had my old factory ones in for leak testing purposes, only decided on them because front facing plenums and good top feed rail kits are out of my budget at the moment, are they really that problematic? Had a set of yellow jackets that lasted me 5 years, no real issues, only replaced them chasing this misfire issue that ended up not being ignition related 😄  
    • Dose Pipe Sutututu
      RB25 S2 Idles but doesn't want to rev

      By Dose Pipe Sutututu · Posted

      Are those 1000cc side feeds? If so, that's part of your problem. I have 1480cc and they idle at stoich on 98RON, and all the way to E85. Also your coil packs.....
    • Trilbyte
      RB25 S2 Idles but doesn't want to rev

      By Trilbyte · Posted

      Update for the sake of closure   Ended up getting the intercooler piping all sorted, new plugs and yellow jacket coils, and she was idling mint until it warmed up while I was bleeding the cooling system. Found the misfire to be localised to cyl 3 by unplugging coilpacks, ran a compression test, that checked out, then decided to get a mate to check if that spark plug was firing out of the motor. Upon cranking it over, with the injectors disconnected, the car actually fired and ran on a couple cylinders and heaps of fuel came out the top of cyl 3 I'd say that injector's either spraying incorrectly or spraying far too much, which is fine as I'm planning on replacing them anyway I'm planning on making about 250kW on flex fuel, and have a set of 1000cc injectors from ozautosport, obviously overkill but I'm planning on building the motor and running more boost further down the line, do you reckon they'd be too big for a smooth idle on 98? Thanks for the replies gents, much appreciated
    • Dose Pipe Sutututu
      Any feedback on GReddy Turbine Kit T620Z in r33 GTST/RB25DET?

      By Dose Pipe Sutututu · Posted

      Nice modern Hypergear high flow would be perfect.
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      I'm confused. You said you want to "remove the clear coat from most panels" but it sounds like you are actually doing a full respray? Few random things to add -  If you chase the blistered paint with 120 grit, I can almost guarantee you'll chase it down to bare metal (that's fine). But if you paint the car from here, you'll have nice little indents where ever the blistered paint was. The new paint won't magically level out the low areas, you need to fill them. Which leads me to the main point I wanted to add, make sure the whole car is flat before you paint it. All those areas with blistered paint you sanded out, make sure to fill them and triple check they are flat with a block guide coat. I'd also check the whole car is flat with a large block and guide coat but yeah up to you if you want to go that far.   
×
×
  • Create New...