Jump to content
SAU Community

Recommended Posts

I wanna buy a N/A skyline and i only have 15 grand to spend , i was looking at a 96 model R33 with a RB20 ... I took it for a drive and it didnt have much guts.

So cutting to the chase , i just wanna know how much power the R33 RB20 has at the wheels and how much the R33 RB25 has at the wheels.

Stock figures would be appreciated.

Link to comment
https://www.sau.com.au/forums/topic/52432-rb25-or-rb20/
Share on other sites

how do you think the '96 R33 that you drove was registered?

There are more relaxed rules for imports over 15 years old. Compliance is a lot simpler and there are no restrictions on what can be imported.

Recent changes in import legislation mean that it is now a lot harder to comply vehicles that do not fall into the over 15 year category. However, it is possible, and depends on whether an importer holds compliance plates for the vehicle in question. So if you are looking at importing a vehicle, the first thing to do would be to investigate who (if anyone) holds compliance plates for that model. I know Sport and Luxury Cars in ferntree gully (VIC) holds compliance plates for R34, not sure on R33. Another importer to check out is Ultimate Performance Imports, also in VIC. I realise that you are in NSW.

That is my understanding of the current import legislation anyway. Hope it helps :cheers:

Definitely don't get a RB20, whatever you do.

Link to comment
https://www.sau.com.au/forums/topic/52432-rb25-or-rb20/#findComment-1037652
Share on other sites

I thought that NA33's could not be complied under SEVS because they don't meet the power to weight ratio requirements? Can't check that cause the sites caput.

KillaBeez that car linked to could be a good choice auction grade 4 is good for a car that old. It would be on the road and rego for less than $15,000.

Link to comment
https://www.sau.com.au/forums/topic/52432-rb25-or-rb20/#findComment-1038055
Share on other sites

Because it's not powerful enough!

Cars have to meet a certain power to weight ratio amongst other criteria in order to qualify under SEVS. I thought that an NA33 would not make the cut but due to it being on Geoffs site, I don't think he'd have it there if it wasn't.

It was a question not a statement. Pitty I can't check it out atm.

EDIT: MMMKay I'm wrong R33GTS non turbo are on the list :Oops:

Link to comment
https://www.sau.com.au/forums/topic/52432-rb25-or-rb20/#findComment-1038411
Share on other sites

Ok well if i can get an R33 with a RB25 for under 15 grand imported ill do that for sure , i have been telling all mu friends lies about the 15 year rule if that is the case .. woops.

I just assumed the 96 model i drove was imported before the legistlation came in.

Link to comment
https://www.sau.com.au/forums/topic/52432-rb25-or-rb20/#findComment-1038929
Share on other sites

Yeah thanx guys for ur help its changed my mind aboout buying one in australia , ill prob import one now , if i can get it in.

If anyone has a good importer that they have imported an R33 non turbo through and has had good experience with them then id love to know.

Link to comment
https://www.sau.com.au/forums/topic/52432-rb25-or-rb20/#findComment-1038974
Share on other sites

http://www.prestigemotorsport.com.au/au/st...sp?StockID=2588 as posted above.

The auction grade is 4 which means that the car has not been in any accidents beforehand - many imports have previous accident history. You will have to add another $2,000 for rego, tyres and stamp duty to the price he uses on his cars, similar with J-Spec.

Geoff Risby http://www.prestigemotorsport.com.au is who i imported mine thru and many other people on this forum will also recommend him. Another popular mob is http://www.j-spec.com.au

Link to comment
https://www.sau.com.au/forums/topic/52432-rb25-or-rb20/#findComment-1038986
Share on other sites

I thought that NA33's could not be complied under SEVS because they don't meet the power to weight ratio requirements?

yeh i've also heard that under the new regulations you cant bring non-turbo R33's etc... only turbo... doesnt make sense to me either but I'm pretty sure thats correct.

Back to the question though... for $15 000 you can get a pretty decent car these days... :P

Link to comment
https://www.sau.com.au/forums/topic/52432-rb25-or-rb20/#findComment-1039013
Share on other sites

Sweet as. i am now on the search for an import. i might end up getting a R32 gts-t

I didnt wanna get one because they are so ugly when they have no exterior mods.

But if i can get an R32 turbo for like 12 grand then ill spend the other 3 grand on making it look pretty :P

Link to comment
https://www.sau.com.au/forums/topic/52432-rb25-or-rb20/#findComment-1039023
Share on other sites

R32 gtst would be a smart buy. Go turbo if you can afford it, or you'll regret it once you want power, and of course sucking noises.

I'm going to rely on my memory and contradict everyone here: R33 GTS25's are eligible under the SEVS scheme in that they exceed the power to weight minimum. However, the market may consider importing one not worth the import and compliance costs, implying that R33 GTS25's would not be imported under the SEVS scheme, althought they are potentially eligible.

Non-turbo silvia's and RB20 R32's do not meet power to weight minimum, from memory.

-Greg

Link to comment
https://www.sau.com.au/forums/topic/52432-rb25-or-rb20/#findComment-1039069
Share on other sites

Yea so 33GTS must just be over that threshold i reakon. Must have been getting confused with the 32GTS or maybe the 33GTS - 2L version.

I guess for the purposes of compliance there really aren't any difs between compliancing a GTS and a GTST, from what I understand of the process anyway.

Link to comment
https://www.sau.com.au/forums/topic/52432-rb25-or-rb20/#findComment-1039156
Share on other sites

go for the 32 gtst

if you are going for an 89 model there ae a few coming in with rb25det and big turbos which would fly... i got my r32 gtst through geoff and it looks killer and has power mods as well

Link to comment
https://www.sau.com.au/forums/topic/52432-rb25-or-rb20/#findComment-1041333
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...