Jump to content
SAU Community

Recommended Posts

hey all,

i was browsing on prestige before looking at the '89 r32 gtst's when i noticed that some of them (being the silver ones) had the normal breaklights but the actual panel that holds the breaklights is black AND, on the back of the boot it has a small badge that says 'skyline' as opposed to the ones that i normally see with the large indented 'skyline'. Still looking at the gtst's i noticed that the other coloured 32's where 'normal' (same colour breaklight panels as the car and indented skyline on the back of the boot). To try and work out if this difference only appeared on the silver skylines, I looked at a silver GTS which was 'normal'.

It seems weird that nissan would only produce differnt breaklight panels for the gtst in one color. can anybody clear this up for me??

thanks. :P

Link to comment
https://www.sau.com.au/forums/topic/52454-89-r32-brakelight-confusion/
Share on other sites

unless you buy a 2 coupe tail light conversion kit which costs about 200 bucks for the rear bumper, $200 for the tail lights and $100 for the coupe bootlid. Plus paint plus shipping :P

4 Doors have...

Raised Skyline badge glued onto the rear bumper

Full glass tail lights that include the reversing lights

Bootlid that has a square corner

Rear bumper that only holds the number plate

2 Doors have...

Engraved style Skyline badge on rear bumper

Plastic tail lights that is only Brake and Indicator (regular skyline style stoveplates)

Bootlid that has a rounded corner

Rear bumper that holds the number plate and 2 reversing lights if you cars from a normal region and 1 reversing light and a 1 red fog light if the car's from a cold region.

thanks guys, so basically the 2 door is a little more upmarket?... are they the only differences between the two?  

And does that go throughout all the 32's from 89 onwards?

wouldnt really call cosmetical differences upmarket. the coupes just have a more sportier look.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
    • I don't have the OEM oil feed lines though and the turbo-wraparound line is torn, only has water. My plan is to get replacements for these and just connect a braided line to there. And make sure it's leak free. Hoses like these are also sometimes used to connect external wastegates, so for an EGR I think you're good using them.
    • Alright I understand. The most likely case is probably gonna be that I just keep the OEM unit in the car as long as it works.
×
×
  • Create New...