Jump to content
SAU Community

Recommended Posts

I though I would start a thread for Stagea dyno graphs. Before you ask, no this one is not mine, it came from a Mercury Motorpsort dyno day. Note the A/F ratios richen up the higher engine rpm, no wonder the fuel consumption goes though the roof when you give it some. As far as I know this Stagea has exhaust mods.

018.gif

Link to comment
https://www.sau.com.au/forums/topic/52540-stagea-dyno-results/
Share on other sites

  • 2 weeks later...
here's my graph, 195awhp, and damn i'd swear the octane boost and shell optimax was really giving a few more horsies up untill that f#%*&@n bus got in front of me.

no matter, hopefully i'll get a good settlement, enough for the KING.....260! :Paranoid:

Damn, I was hoping that Stageas didn't have the annoying RB25DET power dip around 5,000 rpm when you give them a mild tune. :zap:

Took it down the quarter at Willowbank 2nite. Got a 15.55 @ 143km/h in AWD and a 16.03 @ 138km/h in RWD. Let my brother have a go too, he got a 15.77 @ 141km/h in AWD.

No problems at all running in RWD apart from traction of course.

Edit: Did raise some eyebrowes though doing a bit of a burnout :P

Yep, stalled the Auto up to just a little bit of positive pressure on the boost gauge, it outlaunched a 300ZX and he didn't take me until about 50m before the 400m mark. I kept it in 2 but didn't hold it in 1 because I don't seem to be getting much of an advantage, just hits the rev limiter too much. I also hit the rev limiter around 120km/h in 2nd because I changed a tad late, so could prob get it to 15.4 or so, on a cold night maybe low 15s?

Have a look at the timeslips (left one is AWD vs. 300ZX Turbo, right one is RWD vs a rather quick S15) The other pic is my bro staging vs. a Corolla Twincam, I don't think he stalled it up far enough because he got bogged a bit and only took the Corolla around the 660ft mark, that's where he ran a 15.77. The Rolla got a 16.something.

Just noticed this thread, you used my dyno sheet from thedyno day at Mercury. I was having a boost problem too. Had the Profec B installed incorrectly and it was only making 6 psi. There you go that is essentially standard apart from exhaust and being manual.

Have got plans in place to change those figures substantially. :elaugh: :elaugh: :elaugh:

hey guys, heres a dyno chart from the other day. this is for a fairly stock example, with standard cooler / exhaust, and 10 psi boost. cheers!

Woooo, that's very lean. Have I read this right, all you have done is just turn the boost up? Nothing else?:D

gary1, thats on a rwd dyno. and sorry forgot to add mods......10psi, pod filter.

should try the rwd only dyno run on my car and see how much power loss there is.

Jay,

32 GTR fuel pump is a straight bolt in and yes it does make a difference. Fuel tank has the same part number.

Cheers

Gary

  • 2 weeks later...

Finaly got the car tuned with the SAFC in and it went from 180 HP at the rear wheels to 231 HP running 12 pounds which is a good tune by the guys at SST but it was running rich as so the tune will help with the economy.

Blitz Front mount, Blitz Exhaust, Dual SBC, Turbo timer,

Apexi Pod Filter, SAFC, Usual guages.

Finaly got the car tuned with the SAFC in and it went from 180 HP at the rear wheels to 231 HP running 12 pounds which is a good tune by the guys at SST but it was running rich as so the tune will help with the economy.

Blitz Front mount, Blitz Exhaust, Dual SBC, Turbo timer,

Apexi Pod Filter, SAFC, Usual guages.

Was this auto or man. If auto, how does the SAFC go?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • yeah I've never understood that either.... And to answer an earlier question, I write the date on open bottles and throw them if more than 12 months old (which they almost always are, because I don't need to bleed them unless I'm changing lines/calipers etc in between)
    • Nah, the one that hit the boot was a big steel locker, around 6 foot height, 4 foot wide and 2 foot deep, empty it weighs about 15kg and had about that amount of stuff in it The photo didn't give a good representation of the actual damage, the large ding on the passenger side was about a inch deep, the one on the driver was about 1/2 inch deep, right on the curve, where the inner boot frame doesn't let you get behind it with a dolly Basically the same issue with getting behind the damage on the centre of the boot We could have filled it all with bog, but my OCD would be triggered every time I looked at it, knowing what hides beneath  As for the locker, I did get the shits with it and put it in the scap metal bin, but, I pulled it out and it is now sitting in the garage at home full of car servicing stuff, cleaning gear and random tools, it's going to pay for it's indiscretions
    • Whilst I typically don't cheap out on things, if I can save some money, like $1000, on a clean straight panel, that gives me $1000 to spend on other stuff, basically free money really 🤔 🤣
    • Is the toolbox that damaged the boot seal the same item that fell on the car during the storm a while back?
    • Who are you to deny yourself? I’ve said this many times to myself and apart from getting what I really want, I go quiet for a while whilst working out what I just did to my savings and how will I afford what it cost, then, next payday…
×
×
  • Create New...