Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...
  • 3 months later...

Figured I should probably throw this up for interest sake. In terms of power mods this time around:

- High flowed turbo

- Impul ECU

-* Plenumn Spacer

-* HDi FMIC

-* 3" exhaust dump / cat removal

-* K&N Filter

The *'d items are 'new' compared to my old 173awkw, so not a huge difference in terms of 'top power' but the power delivery is completely different - much more power early on in the curve, on decent boost heaps earlier.

SmKY1l.jpg

Figured I should probably throw this up for interest sake. In terms of power mods this time around:

- High flowed turbo

- Impul ECU

-* Plenumn Spacer

-* HDi FMIC

-* 3" exhaust dump / cat removal

-* K&N Filter

The *'d items are 'new' compared to my old 173awkw, so not a huge difference in terms of 'top power' but the power delivery is completely different - much more power early on in the curve, on decent boost heaps earlier.

SmKY1l.jpg

gotta be very happy with that not being tuned yet,

get hold of the actuator mod off scott!

gotta be very happy with that not being tuned yet,

get hold of the actuator mod off scott!

Definitely coming along nicely, its great to see the results and be able to compare between mods - essentially @ 80kM/h I putting down ~20% more power by really only doing air filter, FMIC and Exhaust dump.

More/Consistent boost would be nice :thumbsup:

Definitely coming along nicely, its great to see the results and be able to compare between mods - essentially @ 80kM/h I putting down ~20% more power by really only doing air filter, FMIC and Exhaust dump.

More/Consistent boost would be nice :thumbsup:

thats just it, the response of your turbo must be much better after opening especially the dump.

that actuator mod scotts doing gets you on boost earlier, and allows you to hold a better line!

or you get get a stronger actuator with a long rod, and bend/weld to fit!

  • 1 year later...

scan0001nameremoved.jpg

1999 Stagea RS4S

HKS 2835ProS

Nismo 480cc injectors

Plazmaman FMIC (turnflow)

3" Straight through exhaust with mid muffler and massive rear can (very quiet car)

260 deg type B Poncams

Greddy Profec B

Nistune (car has run with auto base image for around 2 years finally figured out that it was supplied incorrectly and just re-imaged)

Tidy up tune with Jez to check what if any WOT mapping changes were needed after installing the manual image. It is anyones guess what Nistune is doing under the surface. Plus I wanted to work more on getting the car off the line. The Stagea bogs down quite easily unless you give it the beans off the line. Changes made to very low load fueling and VCT has sorted out these issues.

Thanks Bob. The car remains Ms. Wolv's shopping trolley so it is unlikely to see the dragstrip. She will be stoked with the improvement off the line. The car has always had a very quick midrange but this touch up tune managed to pull all the ends together. Jez tipped more fuel in from peak torque and it like it a lot. Each degree of timing was making big jumps in power. The neo's seem pretty sensitive to using fuel to cool the cylinders compared to my R33. No doubt E85 would be brilliant with this engine but it is impractical in Sydney at this point in time both for availability, cost of changing injectors, ECU, flex fuel sensor and fuel pump.

Changing to the manual image on Nistune sorted out some issues with throttle recovery and general smoothness which has been quite annoying for the last year or so.

  • 3 weeks later...

s1 with neo and manual conversion.

3076r. 63 exhaust

38mm turbosmart waste gate

type b poncams

1000cc Bosch injec

nistune

044 external

walbro int

surge tank

extrem 6puck clutch

cooling pro return cooler

trust oil cooler

Mls head gasket

arp head studs

3" turbo back exhaust with nismo muffler

just need to stabilize boost and clean up under the curve but should have a bit more in her b4 exhaust housing runs out. but heaps of fun already

post-76904-0-64123800-1353493553_thumb.jpg

hell yeah e85 would not see that power on 17 with pump. reckon I can can get about 350 with a bit more playing but the .63 should choke about then. also about limit of the g box

  • 3 weeks later...

Just got my NISTune done:

NISTune%20dyno%20AFR.JPG

Series 2 C34 with a boost controller and a home-made dump pipe. Not an amazing result, but not too shabby either considering the almost total lack of mods. Around 120awkw @ 3000RPM is nice with the weight these things are lugging around. Torque curve goes up at 2500 and then flatlines to about 5800, so she's very pleasant to drive. 13 PSI @ 2500, flat line down to 11PSI at 6000.

Edited by joorsh

My M35 made

168kw @ 17 psi

Had to bring boost back as it was pinging due to crap fuel.

Settled for 155 on 95octane @11psi (What i get for being out in the middle of no where with a shit servo around)

Not hard to fix

It's got:

full 3" impul Exhaust

Scott dump

Calsonic front mount

Impul ecu

Stock turbo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...