Jump to content
SAU Community

R33 GTR Series diffences

pimpspec

By pimpspec,
in General Automotive Discussion

 Share

Recommended Posts

Evo_Lee Experienced

Evo_Lee

Posted
Posted
In just about all of the GT-R Magazines they list the first and last chassis number for each model and also build numbers for 32 33 and 34 and all it has for R33 GTR V-spec is that 6,551 were built and this includes N1 models so it doesn't actually have a seperate figure it does for r32 with 228 N1's and R34 with 45 N1's.

I stand corrected, the N1s are included with the V-Spec count. Back to square one unless I find out how many V-Spec...inform later.

Burto, attached are the scanned stats...behold I found these while checking my own books tonight.

Justin, the more I think about it I think the 228 N1 are all N1 not including the Grp A version. Considering all the books strongly suggest 500 Grp A were built, but at 55mil yen how many Grp A can race teams buy unless they came complete with a rack of spare wheels/tires, a few spare engines, gearboxes & parts, your very own pit crews and race engineer :rofl:.

Duncan, you sure there were V-Spec II N1? The only V-Spec II N1s I have read are the BNR34s.

YO880, you learn something new everyday...Next question without asking the UK guys, why does it weight 1633kg?

OK time to pick peoples brains again...how many:

1. BCNR33 4dr GT-Rs were built by Autech?

2. BCNR33 LM Limited and V-Spec LM Limited were built?

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Toni
      R32 GTR - Where to begin

      By Toni · Posted

      Clutch done also about a year ago got a DCS HD Single Plate. Basically done everything but touch the engine 🤣 But will definitely get a fuel pump and ECU, then start saving 🫡
    • r32-25t
      R32 GTR - Where to begin

      By r32-25t · Posted

      Fuel pump and clutch and ecu that’ll get you to about 230 or so kw, after that the sky’s the limit and the budget blows out faster then you can blink 
    • Toni
      R32 GTR - Where to begin

      By Toni · Posted

      Should add all mods on the car are done in my ownership. The car was a 1 owner in Japan and I'm first owner in Aus.
    • Toni
      R32 GTR - Where to begin

      By Toni · Posted

      Thanks GTSBoy. Did BC's so not Japanese coilovers. I've already done all the other points you mentioned besides the seat, I like the factory seats and want to keep original look. Done all the fluids and comp tests etc and all consistent and clean. Well and truly used to the power and car as I've been driving it for a few years as it is now. Contemplating next steps mainly. Preference to remain twins too. @Murray_Calavera Paying for labour.
    • GTSBoy
      R32 GTR - Where to begin

      By GTSBoy · Posted

      Hmm. I don't think it is possible. As soon as you start, you will be on the hook for all the money. $5-10k is enough to make it fragile. Here's the list of things you need to do to make it nice, and driveable. If Japanese coilovers, get them measured and tested, then decide if you're keeping them or replacing them. If low rate springs, then consider big ARBs. If high rate springs, then probably leave stock ARBs. Either way, ad decent end links. Replace and/or upgrade all suspension bushes. That's LCAs front and rear, UCAs & traction arms at rear, caster rods at front. I highly recommend GKTech FUCAs, although the step to spherical joints is a step too far for some people. Rebuild brakes front and rear. This means making sure the calipers are healthy, discs are up to thickness, hoses are replaced with braided. Add good pads and fluid. Investigate wheel bearings all the way around, tie rod ends all the way around, upright bearings at the front, balljoints everywhere. Any of these that are still original are likely to be a bit wibbly nowadays. Bride or Recaro driver's seat, with fairly deep sides. Nice tyres. Street performance wheel alignment. Or track focused, if you're not going to use it on the road. Fluids everywhere if not known to be fresh. Now, learn to drive the car as hard as it will go, before trying to add any power. Save up big $$. $5k is the minimum cost for putting a decent ECU into it. A big single, with manifold, new exhaust, injectors, fuel system upgrade, ignition upgrade, triggering upgrade, etc, is >>$10k. None of that (except the ECU) is a good idea on an old RB. You really should put head studs in it, investigate engine health (compression and leak down, real oil pressure at revs, coolant condition, etc) before even considering adding power. There's nothing sadder than the "I added boost then it shat the bed" thread.
×
×
  • Create New...