td06-25g on r34 gtt...laggy?

[quik180sx]

Hey guys just a quick question, would the new TD06-25G be laggy on the neo rb25det? When would it hit boost, and how much power can be expected from this turbo?

regards.

[IMACUL8]

Depends on the wheel size...

if its the 8cm then i believe its the 550hp turbo, and the 10cm 600+hp turbo.

I dont think it would be to laggy - on the 6 cylinder 2.5 it should start spooling early 3000 and hit full boost by about 4500.

I have seen one (10cm) on a 2.2 Jun motor wrx and it was on full boost by 4800/5000. So the bigger capacity and extra cylinders should bring it on earlier than that.....

Daniel

[sweetr33]

yeah buster would be a good one to comment coz he had one on his RB25. With the rite support items u could easily reach 400rwhp.

[BU5TER]

Yep sounds good, everyones been spot on so far, TD06 25g with 10cm rear makes full boost 19psi in the 4000rpm region and with drop in cams can make 300-330rwkw at 19psi

[RNS11Z]

when is your car coming back on the rd buster?

[BU5TER]

aiming for December only $$ holding me back hahaha

[sweetr33]

what drop in cams are we talking? would 256 duration be enough to make 300kw at rears u think or need bigger like 264/272?

[BU5TER]

I can only speak from experience, I had 264 drop ins and no vct though I can't see why 256's wouldn't be fine

[sweetr33]

oh ok, i only went for 256's and kept the vct. but im using a hiflow stocker not a tdo6 so it doesnt affect me for now i guess,

[Dynamix]

I have the neo motor in my r33 aswell, and am looking at getting a TD06-25G (would the smaller exhaust housing make it come on boost slightly earlier?) aswell, though the only bad point is i dont want boost to come one heart beat style, i'd rahter something more linear as far as power delivery, maybe a GT2835 or something would be the better go for a smoother power delivery rather that te punch a td06 will deliver. Another question, what exhaust flange does the trust turbo come with? And with the TD06 whats the best boost to run it, my neo has stock internals, so i was thinking of runnning say 14psi tops, would that be enough to get the turbo working ok?

Cheers.

[sweetr33]

the td06 range uses a 3 bolts flange pattern which requires the trust manifold or athe flange to be modified on other manifolds, i have seen some mix's with t3/t4 flanges. The td06 is very harsh in its power delivery yes but if u can get the traction it would be awesome, between 1-1.2 bar would be fine

[RNS11Z]

aiming for December only $$ holding me back hahaha

Heheh, good luck

[db_psi]

Just look at the JMS R33 drift car

[sweetr33]

very good car to observe. clean tidy and would go nicely.

[sweetr33]

how did this go??? Any updates> Did u end up buying a TD06 or opting for something else?

[Roy]

HAs anyone got some dyno charts of their TD06s. Ive heard a few ppl comment on how thye hit boost hard.

I am running a 10cm housing, and would like to go to a 8cm housing, bu tot if the result is going to be a light switdh transition onto boost.

So do they really come on boost that hard, when used with the recommended A/R exhaust housing?

[rbs13]

roy. do you think you will lose much power by dropping to a 8cm exhaust housing. although my tdo6 is internal gate it is 8cm i should be putting it on in a couple of weeks.. gonna have exhaust, fmic, fuel pump and a adj reg until i save for injectors maybe microtech or even remap the ecu depends how things go. will let u know how i go.

[Roy]

I doubt id lose power actually. A tuner said i may be able to get away with a more aggressive tune asi have less back pressure so less propensity for detonation...but i dont know if that sounds right in practice?!?!

I would like to try an 8cm, but not if it means wheelspin thru 2md. At the moment with even 1.3bar and what i guess is about 225-235 rwkws i got great traction in 2nd:)

[makaveli]

Hi Roy,

How responsive is it on a rb20?

Im interested in one for mine although im frightened it will be a bit laggy.

Some come internally gated, is yours?

thanks

Mark

[rbs13]

mine is internally gated.. so they do come that way.. they have a stupid wastegate setup tho.. bit hard to explain but not like a seperate flap next to the actual exhaust wheel.. still the same but the extra flap is hidden and.. yea bit to hard to explain. in a way its harder to run the screamer