Jump to content
SAU Community

Recommended Posts

hi,

it is actually going into a friends 200sx, though i can't imagine it would be too dissimilar.

looking to work out how to connect it, both electrically and vaccum wise.. i had heard that the US greddy instructions where wrong..

thanks guys! appreciate the very quick response!

hey Y0880,

electrically, was the hardest i wasnt to sure were to connect it so basicly, i chop the wire which goes from my fuse box to my cd deck, made a connection for the power wirer (cant remember wat colour, but im pretty sure red is power, black is ground) then i also add a fuse just incase it got too much power, i can take photos of what the wirer etc look like if u like?

that would be fantastic,

i will double check the wiring loom but i though there was around 6 or so wires.. i will get the colours and post them up, if anyone can match them it would be appreciated, hoping to get it in tommorow afternoon :rolleyes:

Okay, this is a little hard to explain, so i drew a crappy picture

white = ?

brown = ?

Then there are the two wires that obviously are

red = Power (Acc?)

black = Negative

any help on the white and brown would be great, as would the photos of the stepper motor and it's connections

i will get an actual photo posted very soon

Okay, this is  a little hard to explain, so i drew a crappy picture

white = ?  

brown = ?

Then there are the two wires that obviously are

red = Power (Acc?)

black = Negative

any help on the white and brown would be great, as would the photos of the stepper motor and it's connections

i will get an actual photo posted very soon

Ok, I am the "friend" who is getting the profec fitted to my car.

Here are some photos of the cabling of the unit.

dscn0391.jpg - shows the complete wiring diagram so you have an idea how it all connects

dscn0396.jpg - shows the unknown red and black cables

dscn0401.jpg - shows the unknown brown and white cables

Appreciate any help anyone is giving.

Ok, I am the "friend" who is getting the profec fitted to my car.

Here are some photos of the cabling of the unit.

dscn0391.jpg - shows the complete wiring diagram so you have an idea how it all connects

dscn0396.jpg - shows the unknown red and black cables

dscn0401.jpg - shows the unknown brown and white cables

Appreciate any help anyone is giving.

Ok, i took some photo. Hope this helps

basic,

the red one (right) goes to the stock wastegate (i think that its called :D)

the blue one (middle) goes onto the pipe whichs goes from the plenum into the intercooler and has the bov on it

the black one (left) goes where ur boost gauge is

now for the wirering part, i am unsure wat the brown and white wirer do maybe they have been cut not sure, as mine had only the red and black

Black is ground

Red is power

Tip for install it; try to add longer wirers onto the ground and power as mine where short

Ok, I am the "friend" who is getting the profec fitted to my car.

Here are some photos of the cabling of the unit.

dscn0391.jpg - shows the complete wiring diagram so you have an idea how it all connects

dscn0396.jpg - shows the unknown red and black cables

dscn0401.jpg - shows the unknown brown and white cables

Appreciate any help anyone is giving.

i have attach an image of wat mine looked like when i 1st got it (the wire part)

thanks Michael,

much appreciated, it will all make things go smoothly i am sure!!

hmm bizzare, there are 8 wires going into the connector (all accounted for), then the two wires.. yet the cables don't come out the other end..

i guess they arn't used then, will give that a go..

Thanks

Kent

Ok, i took some photo. Hope this helps

basic,  

the red one (right) goes to the stock wastegate (i think that its called :D)

the blue one (middle) goes onto the pipe whichs goes from the plenum into the intercooler and has the bov on it

the black one (left) goes where ur boost gauge is

One last question mate. There is one single outlet for another tube coming out of the other side of the actuator from the 3 other tubes (seen at the very bottom of your pic you posted 13_Devil. (same side as the wiring outlet)

Would you please be able to trace where this tube goes to for me please ? We would like to fit the controller today so any help is appreciated.

Thanks

Dean.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If that's the wiring from the factory, I'd be inspecting the loom everywhere.   Any signs of that anywhere else, and seriously, I'd get rid of the car ASAP before the electrical gremlins make it worthless, or it goes up in flames on its own. That is scary how that insulation is failing!
    • I should note too as I have all 4 wheel speed inputs to the emtron I now have the emtron controlling the attessa solenoid for 4wd/traction and launch control strategies. 
    • It works quite well with the adjustibility within each of the programs of the turbolamik. Essentially p1 is drive and lockup comes on like a normal driver.  But in program 7 I have customised it to not request the lockup clutch to engage until something like 6500/7 when slip was the lowest. 
    • Yep, I like that. The tags are only on the first post of a thread and we don't get huge numbers of new threads. Also, I plan to add some more report types and we could have a member report type like 'review tags' then members could flag if they thought a topic wasn't tagged correctly.  No way man, I dig the input. Thanks! 
    • It's a valid thought. There's not exactly that functionality already (when creating a thread) - that's where the OP can use/create any tag they want. We'd have to come up with a way for the user to request their tags get reviewed or something. Otherwise the mods would have to review every new post's tags (for those that have them, anyway). There's kind of that functionality already exists to some extent, post facto of starting the thread, where the OP or any other user could report the post to admins, and request that tags get reviewed. We could do this already, and any user could already have made such a request. To make it a part of the forum proper, it would require an initial and an ongoing education programme, so that people know that it's a thing. OP based tagging/request for review would also require at least some (probably most) of the user base to be told that it's a thing they can do. Both of these things probably wouldn't spread too far and/or get used very much. If it was the standard approach on a lot of different sites, then it might do, because people would be used to it. Prank's approach to this differs from my original thought, by leaning into tagging. Which is fine - it's possibly better than what I originally suggested. In fact, I just went to the R32 GTR wiring diagram thread and added tags, including "Library". That's probably a good way to use tags and the idea of a library. We just have to drag together an (organised!) index of threads or posts that have that tag. I have yet to do any of my own follow up by pursuing worthy threads and posts and reporting/marking/tagging them for the library, such as the @Sydneykid stuff I was talking about, and possibly any amount of @Lithium 's and others' posts. At least if I tag them Library, we'll have a start.   Back to @Wazmond's idea as it relates to @PranK's, we might have some sort of a list of tags that are already used to scrape for this library. I'm not entirely sure how that would be presented or used, particularly if it got long. But it's yet another idea!   cheers
×
×
  • Create New...