Installing Blitz SBC i-D in a R34 GTT

[XtRoN!C]

Hey guys,

Ive just installed a blitz boost controller on my r34 gtt, it seems to be boosting fine, though the boost readings on the controller seems to be wrong when compared to the stock gauge the car comes with. The controller also isnt showing vacum it is always on 0 is this normal or should it be showing vacum?

I set the controller to kpg/c2 (or wat eva it is) like the gauge on the car, and the car gauge shows under 0 this boost controller is showing boost, you can hear the solenoid ticking so it is boosting while the gauge shows vacum. When the boost peaks the reading on the boost controller is slightly higher than what the stock gauge is showing.

Anyone got any ideas? do you think the t-piece for the boost reading is connected to the wrong hose? anyone know where it should be connected on a R34 GTT?

Thanx.

[Bass Junky]

The factory gauge isn't really worth a pinch of sh1t to tell you the truth.

Never believe a factory gauge to be really accurate.

Mine isn't.

[Bass Junky]

PS.. You need an AFM to TURBO duct .

Check my sig.

[XtRoN!C]

The factory gauge isn't really worth a pinch of sh1t to tell you the truth.

Never believe a factory gauge to be really accurate.

Mine isn't.

What about the boost controller not showing vacuum is that normal on a blitz boost controller?? It use to be hooked up to my old car but i cant remember if it showed vacuum.

I connected it to the t-piece on the hose that comes of the boost sensor in the engine bay.

[Bass Junky]

I'm not sure because I don't have an electronic Boost Controller.

[Daz]

My Greddy profec E01 shows vacum

[IanH]

I've a SBC-iD on a R34GTT and mine shows vacuum but only small numbers (-12 for example not -700mmhg like the stock gauge)

[XtRoN!C]

I've a SBC-iD on a R34GTT and mine shows vacuum but only small numbers (-12 for example not -700mmhg like the stock gauge)

Hi,

Do you have a pic of your engine bay you can post up or email me? I wanna make sure i have the boost t-piece connected to the right hose on the engine bay, i think its on the wrong one.

[Ronin]

I have a blitz sbc id II on my r32 and it shows vaccum, It goes to -18 or so depending