Jump to content
SAU Community

Recommended Posts

any body have or know about Buddy club suspension for the stageas ? please let me know if its worth the $2034.50 they quote dilivered to your door.

http://www.nengun.com/buddy-club/club-racing-spec-damper

how low will it go? how hard would the ride be will it fit the s1? what is included in this kit? and most of all how good is the handling.

cheers

any body have or know about Buddy club suspension for the stageas ? please let me know if its worth the $2034.50 they quote dilivered to your door.

http://www.nengun.com/buddy-club/club-racing-spec-damper

how low will it go? how hard would the ride be will it fit the s1? what is included in this kit? and most of all how good is the handling.

cheers

I currently have 4 guys with Buddy Club suspension in their Skylines that I am supplying softer spring rates to in an attempt to get them some ride comfort.

:nyaanyaa: cheers :happy:

ok scrap that idea then can you put a quote together for me for every thing ill need to get better suspension for my S1 stag - the springs

figure i can just use my old ones (probly not the best but will cut cost a bit)

ok scrap that idea then can you put a quote together for me for every thing ill need to get better suspension for my S1 stag - the springs

figure i can just use my old ones (probly not the best but will cut cost a bit)

The Group Buy thread is the best place to start

http://www.skylinesaustralia.com/forums/in...showtopic=85592

Then PM me if you have any questions.

:O cheers :woot:

that thread is for people with half a clue about suspension.... sif i know what i need ? so for my question, what do i need with out the springs? and how much for every thing you're about to tell me i need

that thread is for people with half a clue about suspension.... sif i know what i need ? so for my question, what do i need with out the springs? and how much for every thing you're about to tell me i need

PM sent

:O cheers :woot:

I might be picking up a gtr rear cradle, susp, brakes, all of the above, really cheap too... I'll let you know how it goes...

what do i need to know in order to convert it...I have a bunch of mechanic mates up here with all the tools and probably all the knowledge i need, but i would love to discuss it with someone first. Take full advantage of the SAU collective wisdom.

I assume i will need:

mod certs afterwards

GTR rear end without HICAS for donor parts (which models are these - i assume it's the 34 only)

will the GTR rear driveshaft fit? or should i use the Stagea one?

I will PM Cruiseliner and SK

Edited by captinsane
  • 5 weeks later...
  • 4 weeks later...

a crossreference list ive made up for all the suspension components on the stagea

info sourced from FAST, cusco, JIC websites

Front Sway bar

R33 GTR

Rear Sway bar

S14

Front camber arms

GTR33

wgnc34

Rear camber arms

S14

r33

rear toe arms

s14

r33

rear traction /tension arms

s13

s14

s14

y32

y33

v35

all 32 /33/34s

a31

z33

c33/34/35

front tension rods

BNR32

BNR33

toe rods front

a31 cefiro

HC33

M35

i think that covers all of them....

  • 4 weeks later...
a crossreference list ive made up for all the suspension components on the stagea

info sourced from FAST, cusco, JIC websites

Front Sway bar

R33 GTR

Rear Sway bar

S14

Front camber arms

GTR33

wgnc34

Rear camber arms

S14

r33

rear toe arms

s14

r33

rear traction /tension arms

s13

s14

s14

y32

y33

v35

all 32 /33/34s

a31

z33

c33/34/35

front tension rods

BNR32

BNR33

toe rods front

a31 cefiro

HC33

M35

i think that covers all of them....

front struts for s2 r33 r34 pedders xtreme full adjustable ride hight if you have tein's such as i did you need hq - wb rear spring dampers up top to complete this conversion with standard tops not a prob !

front struts for s2 r33 r34 pedders xtreme full adjustable ride hight if you have tein's such as i did you need hq - wb rear spring dampers up top to complete this conversion with standard tops not a prob !

i know that it sounds like i dont know what i am talking about but did have tein tops but did with the 3rd stagea run in perth i fractured one badly r33 strut tops all good all installed back on track looking forward to next meeting !

  • 1 month later...

Has anyone here just replaced thier stock factory shocks with another set of standard ones. Although I would love to buy SK's whiteline/bilstien setup in the group buy I have just spent so much money on the car this year so far that I just can't justify anymore at the moment. Most of the bushes have already been replaced with whiteline ones anyway (by the previous owner) and with the new nismo kit bringing the car down lower anyway I don't have any intention on lowering it at the moment anyway. So I just want to replace the clapped out stock shocks with another set of stock ones. Basically just after prices and opinions from anyone thats done it. Recomended brands etc.....

Has anyone here just replaced thier stock factory shocks with another set of standard ones. Although I would love to buy SK's whiteline/bilstien setup in the group buy I have just spent so much money on the car this year so far that I just can't justify anymore at the moment. Most of the bushes have already been replaced with whiteline ones anyway (by the previous owner) and with the new nismo kit bringing the car down lower anyway I don't have any intention on lowering it at the moment anyway. So I just want to replace the clapped out stock shocks with another set of stock ones. Basically just after prices and opinions from anyone thats done it. Recomended brands etc.....

New standard Skyline shocks cost more than Bilsteins last time I checked. The standard shocks won't have the valving to control lowered springs (check out this thread http://www.skylinesaustralia.com/forums/in...=103158&hl) plus they will wear out pretty fast. Which is probably why your current (standard) shocks are stuffed.

;) cheers :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I like it when the counter chick leads you out the back into the racks and says "have a grub around in here and see if you can find what you need. I'll be back in a few minutes. Just left me in front of a massive motorised shelving system and 2-3 million fasteners, so I could find a peculiar SS shoulder bolt with cap head. Gotta love country towns.
    • I used this https://osgiken.com.au/product/os-giken-os-250r-lsd-gear-oil-80w250-1-litre/   shut my nismo 1.5 pro up by heaps…. Not silent though. Gives the car character and personality. It ain’t a carolla. If you want silent, put a quaife in it.
    • It's about the same time for me from Bunnings, or the Fasteners. My big push away from takeaway food, and gluten in general keeps me away from the Bunnings Snags too! Weather up here, I've been out for two walks today in the beautiful sunshine. Had a few little drizzles, and some wind, that honestly, a tin of beans and I could compete on how harsh she blows Thankfully, being this bit inland, we're not getting anything much really. Will probably pick up a bit more when/if Cyclone Alfie decides to come ashore. A few areas in the GC though, and south into NSW are really getting smashed though! Right now, I'm just annoyed Alfie hasn't hit, as I'm not allowed to crack into the BBQ foods like the bacon and eggs until the Cyclone hits "In case we lose power"...
    • I love fastener joints, the price difference between them and joints like Bunnings or Super Cheap is amazing, and they either have exactly what you want, or they can get it to quick They have even given me some for free when I only needed a couple of specific size In saying this, I have paid premium for fasteners from Bunnings if they have the sizes I need, but only for convenience really, as my local is only 10 minutes away, the Sushi joint near them is also a consideration  How's the weather Matt? Stay safe mate
    • Wideband is worth setting up if only for tuning purposes. I would not mess with the ignition system unless there's a misfire. HKS crank trigger is popular out here for the relatively easily sourced Denso crank sensor, not a bad idea to install as well regardless of power level on a standalone. Boost leak test is worth thinking about. Oil pressure sensor tied to a fuel cut isn't a bad idea either. Getting the tune figured out is a good idea. Without putting eyes on it and getting under it there's no way for us to tell you exactly what it needs but most likely you're down to the last 10% that will make a big, big difference in how happy you are with the car.
×
×
  • Create New...