Jump to content
SAU Community

Recommended Posts

Some of you suck arse with your coments some times, do wotever you want to your car dude. As for instaling them tis easy and no better way to learn bout cars then to try for yourself. Took me pretty well a whole day and few beers later, mainly cause you gotta go round wheel arches and thread cable through chassis holes. Make sure you connection are well soldered and shrink wraped lots of volts with neons :D

ps been pulled by the cops twice and now have a warning bout them

heres my finished product

Erin

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

azron - just to confirm.... neons are LEGAL is they are not red white or flashing? (in victoria) vicroads actually said that?  thats the first time i have heard anything like that.  i thought they were illegal full stop.

It doesent matter what vicroads says coz if a cops stops you and see's em you will get defected depending how far the pole is up the cops ass at that time

All forward facing lights must be white, all rear must be red (minus the reverse lights and indicators). Under car neons are NOT illigal in victoria but I agree if you do get an asshole cop he'd probbaly try and defect you. That info was straight from a cops snout too.

hehe maybe ill write to vicroads, get written proof from vicroads that neons are legal (taking into acount all the regulations above), and then carry that proof with me, so if a cop trys to defect me.... bam.

that would probably piss the cop off more and he'll try real hard to get me on something else lol...

maybe not such a good idea

really now? So its entirely mr policemans call?.. bummer. So if you have a bad run with the cop he can defect you for nothing ?... i wonder if anybody has thought that they were been defected on inapproapriate grounds or something and taken it to court to get sorted?

really now?  So its entirely mr policemans call?.. bummer.  So if you have a bad run with the cop he can defect you for nothing ?... i wonder if anybody has thought that they were been defected on inapproapriate grounds or something and taken it to court to get sorted?

dont know about other states but in vic bracks in his infatuate wisdom has made it so that 'in the opinion' of the cop they can defect you if they think something is unroadworth in ur car is 100% stock.

how much are neon kits btw? (not including installation) i know they come in different sizes etc but roughly how much....

I'm a fan of neons, but i wouldn't spend much money on them when i could be spending that money on something that improves the performance of my car...

Some of you suck arse with your coments some times, do wotever you want to your car dude. As for instaling them tis easy and no better way to learn bout cars then to try for yourself. Took me pretty well a whole day and few beers later, mainly cause you gotta go round wheel arches and thread cable through chassis holes. Make sure you connection are well soldered and shrink wraped lots of volts with neons :D

ps been pulled by the cops twice and now have a warning bout them

heres my finished product  

Erin

Man daz unreal, I read that when you install the you should put silicone on the tips as so to prevent water getting into them and stuffing them up :drooling: OR the smart thing to do is buy water proof ones :flamer:

just get em installed properly. I got mine installed for 200 bux and there were a couple under the dash as well. If u get em installed then u most likely get a lifetime warranty on the installation. Neons look phat on the right ride and ppl will onli rag on ya cuz they got conflicting tastes. Plus chix dig it WIKKDLY cuz they like bright stuff. And if it came down to it, i'd rather get laid....

martydaman - had them on was in a country town bout 200 k's from adel

philmak - as for silicone never used had mine on yr and half no probs all work fine drive car daily in rain :D

krzysiu - i think stickers real or not down your doors and pictures of your car in every post is attention seeking but hey

dont know about other states but in vic bracks in his infatuate wisdom has made it so that 'in the opinion' of the cop they can defect you if they think something is unroadworth in ur car is 100% stock.

what do you mean by 'has made it'? Did he actually change the law? Ive told this to friends and family and i keep getting pushed back with crap like " you should't believe everything you hear" and "You should be more skeptical"... and "how can that be possible?, this is a democratic society" so on and so forth. I

NSANT - i believe what your saying and i hope that i haven't written this in an offensive way because im not trying to be aggressive but do you have any more details on this bracks thing? I'd love to prove everybody wrong.

If you were gonna get it done professionally, it'd cost eleventy billion dollars...

hahahahah that made me laugh my head off

but seriously if u want neons... then go for it. any car stereo place will install them for you. just make sure they dont drill into ur spare tyre (yes it has happened to me)

hahahahah that made me laugh my head off

 

 

 

but seriously if u want neons... then go for it. any car stereo place will install them for you. just make sure they dont drill into ur spare tyre (yes it has happened to me)

dang that gotta suck....

krzysiu - i think stickers real or not  down your doors and pictures of your car in every post is attention seeking but hey

Good call bro, good call! I'm all for rice, wateva floats ur boat! DOn't HATE ME cos u AINT ME! ahahaha

Neways, in nsw the Highway Patrol will flame u hard for anything they want. I've had more defects than i can remember. The cops in my area have very very large and long poles!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...