Jump to content
SAU Community

Recommended Posts

Has anyone here dealt with a company in Sydney called “TOO FAST 2 FURIOUS Performance”? They are based in Sydney and apparently they are the cheapest distributor of brand new turbos and performance parts in Australia.

The are advertising a Hybrid T3/T4 turbo for $800 and stuff like T70 650hp turbos for $1000. I am looking at buying quite a bit of performance gear from them; does anyone know how legit they are?

Link to comment
https://www.sau.com.au/forums/topic/53228-too-fast-2-furious-performance/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Has anyone here dealt with a company in Sydney called “TOO FAST 2 FURIOUS Performance”? They are based in Sydney and apparently they are the cheapest distributor of brand new turbos and performance parts in Australia.

The are advertising a Hybrid T3/T4 turbo for $800 and stuff like T70 650hp turbos for $1000. I am looking at buying quite a bit of performance gear from them; does anyone know how legit they are?

Havn't heard about these guys, but what's the web address, throw that up on this post!

Would have included it had here been one to give :P

There advert in the HPI mag includes and e-mail and phone number.

[email protected]

Phone: (02) 93491154

I e-mailed them, just got an auto responce because they are too busy. Rang a few times last week, nothing :( I will try again later this week.

"Monday, October 11, 2004

Dear Sir,

Thank you for your interest in our products

Due to large number of enquiries and Australian-wide orders, we apologize for the delay in replying to your email.

You can call me on 0416-143177

ALL products is brand new - comes with 12 months warranty. No one can compete with our price in Australia.

We would like you to know that your satisfaction is our goal. If you have any problems, or if there is anything we can help you with, please do not hesitate to drop an email to: [email protected]

Sincerely,

Toofast2furiousperformance"

NO web site!

Hybrid T3/T4 550hp Wet Floating Ball Bearing Turbo – Stage 3 for Skyline. Compressor Wheel .57T Housing .50 A/R. Turbine Housing .63 A/R.

I am not advertising there shit! I just want to know if anyone here has dealt with them before….

they sound like one guy pretending to be a business... ie Pacific Internet personal email address, and just watch out that the turbs aren't the same chinese made ones that people sell on ebay for stupid prices that stop working in stupidly short amounts of time.

Yep, if anyone saw the posts in the FI forum about the hybrid turbos I posted a few weeks ago it was from these guys.

It looks like they do post their stuff on EBay too- I can't find the link at the moment but I'll post it when I do.

I've been told that you'll need to modify the dump pipe slightly to bolt up to the turbo flanges.

I sent them an email regarding lag on a RB25 and this was their response:

"Our Stage 3 T3/T4 .50 .63 with our 40Mm racing W.G makes the turbo boost comes around 2700 - 3000 rpm mark.

This setup @ 12 psi gives 200Hp gain at the wheel on RB25DET - turbocharger is set for early boost."

The deal sounds OK, I've talked to them several times now - I'm just a bit skeptical about the lag claims at the moment..

Yeah at this stage I don’t really car if it comes on at 2700 RPM or 3700 RPM, just want to know if they are the real deal. Too many shit hi-flowed turbos never see over 10,000k’s and I wasted $2000 on one once after it was highly recommended to me through people I trusted. At this stage a new HKS 25/35 seems like the safest option at $2000!

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Interesting, I've heard complete opposite on my end. Bit of a lottery I guess.
    • Getting Dangerously close to being ready to go back in the car. Rockers in with clearance castings now (and a quick check with the USA for the torque settings for the larger custom bolts) Covers and ported FAST Manifold sitting on there. Not fully tightened down as there's some clearancing required for the water pump with the earlier LS1 water pump styles. Example of the clearancing needing to be done: The body has to be ground a little but I'm struggling finding an actual piece of it. The later variant of water pump resolves the issue as the manifold was designed around it. It only came on the VZ LS1 in Australia, it got a different pulley for Gen4 motors. (it also costs $450... vs... $0).
    • https://files.fm/f/5atwkuvcjd
    • Doing some height adjustment on front suspension on a v35 and noticed this. The passenger side looks correct. So wondering what's happened to the drivers side?
    • Oh...I have the electric mirrors as well iirc ...they're in the same state as just about every other R31 door mirrors, with the 3 plastic screw towers broken/cracked in the plastic molding. All the interior is 'dry', so the mirror switches etc likely all work fine. Some pics below of the trimmer pieces ~ looks to me like previous owner, painted chrome finished trims with black paint ...ergo, the chrome underneath is likely a-ok... ...starts to look yukky posting stuff like this, how much did it cost in fuel on your last sortie up this way?...me just thinking aloud, borrow someone else's 4cyl to cut costs, come do your own pick'n'pull like before to save me some bother...hehe.. but whatever, I'll just earmark bits I know you want, because the way this is all panning out, I'll be able to retire the R31 from daily duty at long last, replacing it with a Subaru wagon I'm lining up in the wings...ergo, my attitude towards the donor pinny shell is starting to wane a bit, and I'm more than happy to help you out there... Like you say though, no rush...and I'll guarantee we won't be moving too far from this locale at any rate 😎
×
×
  • Create New...