Jump to content
SAU Community

Recommended Posts

Spotted two yesterday (NYE), both on exactly the same area of the same stretch of road, but around 10mins apart.

The first was a silver s1 (rego BAY-76Z, I think), with some silver pinstriping on the tail lights in a rectangular pattern. The second was the white s2 that I've seen quite a bit in my area over the past year or so (rego COP-003). Both spottings were on Seven Hills Rd (aka Prospect Highway) right near the intersection of Station Road, and both cars were heading away from Abbott Road and the M2...

Spotted two yesterday (NYE), both on exactly the same area of the same stretch of road, but around 10mins apart.

The first was a silver s1 (rego BAY-76Z, I think), with some silver pinstriping on the tail lights in a rectangular pattern. The second was the white s2 that I've seen quite a bit in my area over the past year or so (rego COP-003). Both spottings were on Seven Hills Rd (aka Prospect Highway) right near the intersection of Station Road, and both cars were heading away from Abbott Road and the M2...

Hey i saw the white Series 2 heading towards Seven Hills Shops on NYE too. It good to see a few more popping up around the area.

Has anyone seen mine S2 rego (BDS-22T)????

spotted silver ser1 with body kit on hervey bay esplinade looked nice, also I can't believe that after 4+ years of ownership I still have not been spotted :( I have waved to many fellow stagea owners but no spotted post :D anyway nice car who ever you were.

Edited by rb30dett
hey was it parked or driving ?

didnt see you tho unless you were one of the many drunks i drove past haha

Also today out side 'Rays Outdoors' in dandy plates were non other then ...... STAGEA

was gonna park in front of it but would of left you no room. looks very nice man

you were driving i didnt get a great look at yours but enough to get the plates,i dont have the STAGEA plates but ive seen him once or twice my plates are WGNC34

spotted a white Stagea on heatherton road about an hour ago with custom no plates.. forgot them though >.< thought it was you RBPOWA but wasnt lol

that one definitely could have been me probably dropping off the ball and chain lol

pretty sure i spotted simons old rig on canterbury rd/springy rd intersection.

had different wheels on it, but dead certain it was his. did he sell it?

white s2 in ftg, the road where maccas is. seen it a few times, was unfortunately blowing a bit of smoke :D

and a white s1 or s2 on the westgate fwy saturday or sunday...

starting to become common now.

you were driving i didnt get a great look at yours but enough to get the plates,i dont have the STAGEA plates but ive seen him once or twice my plates are WGNC34

ahhh damn you, i wanted those plates !

there is a guy on here just by pure luck his plates are standard ones WGN-342 series 2 so it makes sense

pretty sure i spotted simons old rig on canterbury rd/springy rd intersection.

had different wheels on it, but dead certain it was his. did he sell it?

white s2 in ftg, the road where maccas is. seen it a few times, was unfortunately blowing a bit of smoke :D

and a white s1 or s2 on the westgate fwy saturday or sunday...

starting to become common now.

westgate freeway Saturday think it might of been between 5-7pm if so that was me.

FTG ? fountain gate ? im around there alot , gf lives near by, but no smoke from me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...