Jump to content
SAU Community

Recommended Posts

Spotted Theo's AXIS on the hoist at the Penriff choice A-one Stagea bro happy times workshop last night.

I hope he didn't put the suction pipe on because he will be pulling it back off for the actuator!!!!

I hope he didn't put the suction pipe on because he will be pulling it back off for the actuator!!!!

nope its getting ceramic coated first :D

spotted you today Dale at 4pm on York Rd :P i was in the work BRICK lol

I hope he didn't put the suction pipe on because he will be pulling it back off for the actuator!!!!

Lol, with mine; you can actually get the actuator out without removing it. ;)

nope its getting ceramic coated first :D

spotted you today Dale at 4pm on York Rd :P i was in the work BRICK lol

Sneaky! Didn't even know; hope I wan't picking my nose... :woot:

Base coat is going on tonight, along with some parts for the Makinnen.

Turbo is off, exhaust housing is getting coated, new Meek performance dump, and X-force full system going on.

Full hard piping kit, and a Walbro going in tomorrow. In a month or so it's getting a Quaife front LSD, and going for a power fc tune.

Turbo is off, exhaust housing is getting coated, new Meek performance dump, and X-force full system going on.

Full hard piping kit, and a Walbro going in tomorrow. In a month or so it's getting a Quaife front LSD, and going for a power fc tune.

power FC?

hmm interesting!

Possibly should clarify; the TME that I was referring to, sadly doesn't belong to me. It's a car in my mates workshop that is getting some love.

I wish it did; but fitting up a bunch of sexy bits to someone else's car is going to have to do for now.

Wasn't finished in time for me to see it run today unfortunately. It's going to be a hell of a thing though.

Spotted again a black C34 S2 Stagea with black mags on Yass Rd Queanbeyan NSW yesterday (15 Aug) at about 0830. SA plates - must be more than just visiting as I saw it in the same spot a few weeks ago.

saw the yellow rs4s aswell, passed on reservior rd, i gave a wave and revieved one back, i was in my silver c34 s2.

cheers.

Wow i got seen alot this trip. Ur S2 looks sweet. I wish mine wasnt so dirty. Also spotted the 2 white S2's, a white m35, a gold m35 and a silver m35. All in and around WTAC.

Wow i got seen alot this trip. Ur S2 looks sweet. I wish mine wasnt so dirty. Also spotted the 2 white S2's, a white m35, a gold m35 and a silver m35. All in and around WTAC.

I think u had parked near mine on the Saturday at the start of the drifts till I left. Little higher up the hill nd a row or two closer to the final turn. Mine had all the stickers nf was 2nd in from the track

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sounds like it is rotational in the driveline. CV? Tailshaft CB? Also.....didn't you just pay to have that bit painted and put on the car?
    • Yeah, when I dialled my idle down, given how much time I spent idling at the lights in traffic on my daily commute, the effect on overall fuel consumption was absolutely noticeable.
    • Emissions, fuel consumption, heat, noise, etc. most likely.
    • For me at least the reason why it bothers me is because it's indicative of a deeper problem. And that will nag at me forever. Especially because I have tailpipe emissions testing + evap leak testing every 2 years.
    • WELP. I went to the track, and I suppose it went okay because any time you can drive home is okay. You may notice the car is not on the circuit in this picture. It was about 35C day out in Benalla which means the track was approximately the surface of the sun, probably. Good things, car did not overheat but it _was_ warmer than when I had done track days in similar heat before, I think, I'm not sure - I can't quite remember. Coolant got to ~105 via the ECU after 20-30 minutes of belting it in said heat. Oil got up to 145C in one instance which is pretty crazy due to oil cooler. Pressures were fine. I seem to remember this not getting quite so high before the vents. More HMMMM'ing to be done. On the subject of HMMM'ing, can anyone identify the sounds in the video below, you will know which ones I mean: https://www.youtube.com/watch?v=uj3BkI2cbTc I included some 'normal' sound as a reference for the first minute or so. The microphone in this instance was where the license plate is. It stopped working later in the day which is why my "best example of a lap video (not produced)" had internal audio - Isn't hearable from inside the car. I don't mean the chirping of the un-bedded/badly bedded track brakes which you can only hear while braking... Thoughts, brains trust?
×
×
  • Create New...