Jump to content
SAU Community

Recommended Posts

NISMO,

If I was to guess at it I would say that the alternator bearings are on the way out!!(these can sometimes make the exact same sound that you describe so I would check this first) But to check it you would have to remove/loosen the belt to see how easily the alternator spins to make sure!

MEGA

Link to comment
https://www.sau.com.au/forums/topic/5380-noisy-start-up/#findComment-85169
Share on other sites

hey guys i got a bit of the same thing with my car, when it is first turned on its has a whining noise, this goes away after about 4 mins.

and what bearing do you think will be fked if when the clutch is out there is a loud noise but when the clutch is in it stops ?? ideas anyone

thanks

Link to comment
https://www.sau.com.au/forums/topic/5380-noisy-start-up/#findComment-87643
Share on other sites

There was a thread on this a while ago, but no resolution.

I have the same problem.... When its cold, you start the car, and you get a screech (intensity of sound depends on how cold it is), and it will last about 1 - 2 seconds.

I've had this prob for over 6 months now, and I have no idea what it is. As it only does it when i start the car, and the outside ambient temeperature is low, AND it only lasts about 1 second, I haven't bothered to fix it!

And no it's not the fan belts,

Doubt it is the alternator bearings, as it would do it more consistently...

Can anyone else that has this problem, please tell us if you also have a squeeky clutch! As in does your clutch squeek sometimes when you depress the pedal?

Zahos

Link to comment
https://www.sau.com.au/forums/topic/5380-noisy-start-up/#findComment-88808
Share on other sites

have a read through this thread adam

http://forums.skylinesdownunder.co.nz/show...=&threadid=7186

I'm just trying to figure out if the 2 probs are related....

Anyone else that has the noisy start up problem hav a squeaky clutch? Even if you have one prob, and not the other, please tell us, and how long yoou've had the problem.

Thanks

George

Link to comment
https://www.sau.com.au/forums/topic/5380-noisy-start-up/#findComment-88947
Share on other sites

bugger everyone has the same thing here

we need to have a skyline meet lol "maintanence meet"

we can all do our bearings and squeaks at the same time :)

like a dyno day :)

might aget a quote on getting the throwout bearing...or even get someone to look at it and tell me what they recon it is

Link to comment
https://www.sau.com.au/forums/topic/5380-noisy-start-up/#findComment-88973
Share on other sites

Zahos,

I have a auto(Not for long though) GTS4 and I have experienced the same sound on start up (only twice so these would have been cold outside and that the car hadn't been started for one week) so I don't think that the start up noise is related to the manual gearbox.

It seemed to come from the front of the car where the alternator is located?

It also happened after I fitted a new fuel filter and had to clean the engine bay again I thought that a unsealed bearing had got a bit damp because I only cleaned the drivers side of the engine bay.

I can't actually diagnose the problem because it has only happened to me a few times and is inconsistent enough for me to leave it alone until I put in rb26.

MEGA

where is NISMO?(the one who started this thread)

Link to comment
https://www.sau.com.au/forums/topic/5380-noisy-start-up/#findComment-89363
Share on other sites

Thanks for that Mega!

So now I'm left with no clues as to what it could be! I would think that if it were bearings that it would do it more consistently? A friend had the bearings go on his air-con, and that made bad noise consistently, wouldn't the bearings off any component working off the fan belts do the same thing if they were buggered?

Anyhow, summer is coming so I guess I wont have to worry about this one for a while!

Link to comment
https://www.sau.com.au/forums/topic/5380-noisy-start-up/#findComment-89582
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I much prefer that to an actual oil pressure issue, never would of thought it would of been a volt drop issue but SAU brains win again. Guess ill be turning down the oil pressure limit for the track and hunting some grounds. Ill hopefully update this thread with some high oil pressure and solid ecu voltage logs. 
    • You've just discovered a really good reason to tell yourself, yes, I do need to buy an aftermarket ECU. Put the MAF in the bin. Slap in the new ECU and have a think about what turbo sounds you prefer.  Do you want a 90's style BOV wooosh? Do you want a hektik tsututututu?  Mate, can't go wrong. Just gotta get that ECU and the world is your oyster. 
    • Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!! EDIT: So i read about this topic some more and i if i understand that correctly: That Greddy can function either like BoV or 100% Bypass valve? And that Turbosmart is what they called hybrid so you can adjust what and how many air can be vented out or back in? Is this right? THX!
    • That dirty voltage drop is the culprit I suspect 
    • i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
×
×
  • Create New...