Jump to content
SAU Community

Recommended Posts

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

The garage will be open, after I fit the new racing seats. I'd love to have time to fit the injectors and tune but that's life.

Love the avatar.:wave:

Car is back at the mechanics for the final tune. Hopefully the idle miss is just a fuelling matter and that it makes some decent numbers....so wont be getting the car back to Sat arvo.

Do you need the injectors with your current setup? If you need a rail let me know and ill bring it over Sat arvo with the Q45 AFM:)

The tune will have to stay as it is as I have a bit of other work to do first. I'm just keen to see how many kmh difference there is in the top speed on the straights with the wing at min and max AoA.

See you sat then Troy.

OK looks like me Roy Snowie Ash and Emre won't be in. See you tomorrow guys. Just the busted back is giving me curry (thanks army) so I can do without some time on the trains.

Sat night was way more fun then Sunday!

I'll 2nd that - I had heaps more fun on Saturday nite than I did on Sunday.

OKOK - possibly it was because I had so much fun on Saturday nite that had such a bad day on Sunday.

Still but, great night - lots of fun.

Bec: -someone

+everyone :)

Roy wasn't going to do.. pfft :( He just needed my bad influence to talk him into it...

Rest of you are pikers though.. but it's ok caus I think we (as a group) managed to drink enough to cover the absentees share..

Anyway nice to meet you all.. whens the next drinking session?

Also, if anyones interested in going go-karting very soon let me know.. we're probably organising something & may have some spare spots..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Reasonably hard, although I haven't run it with the new Endless setup yet. The old brakes were F50's on 335mm rotors and the car did a 1:40.6 at Phillip Island which is a reasonable time, I'm seeing high 600s on the temperature paint. A guy I know ran the Endless fluid at WTAC without issues and he was doing 1:33's I think (Evo) with a 355/332 setup. I don't get out to the track as much as I'd like but we put the car on the hoist and spanner check every bolt and re-paint mark everything, bleed the brakes, change the fuel, check the coolant system and re-bleed blah blah blah before every event. Motorsport is expensive, RB's are expensive so a couple of hours before an event is time well spent. It's also a net time saving because if you can keep your RB from self destructing it saves you time in the long term!
    • Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
×
×
  • Create New...