Jump to content
SAU Community

Recommended Posts

hey how r ya all, im new and dont have a skyline yet. but they r the maddest cars around and hoping to get 1 soon. im lookin at an r32 GTR if i can find a cheap 1 through a private importer. just wondering if there r any people that kno a good price to pay for 1 and who would b a good company to go thro to import it.

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/
Share on other sites

Well you probably COULD pick one up for $17,500... dunno if it'd be drivable though... You'd have to do more work than its worth to get it up to scratch if you got something at that price.

I'd suggest saving a bit more and spending ~$25,000 that way you should get a nice clean example with prehaps a few light mods.

Just my view though and I'm only a novice at importing too...

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1059727
Share on other sites

They used to be available at that price when you had to store them for up to a year before they could be brought in, but now the cars are actually landing here, the price has gone up to the early $20ks even for an unmodded one.

For some reason the price of R34s has skyrocketed also .... just when I was thinking about getting a GTR too :)

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1060829
Share on other sites

i have just been lookin on prestige motor sports and have noticed that the cheapest 32 GTR is in the 19's. looks like i will have to b spendin around 21-23 for a decent one. oh well they r mad cars and think it will b worth it, i hope! cheers for ya help so far fellas!

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1061149
Share on other sites

Yea the reason the price has gone up is because they are now an eligible import, as of May or June I think and therefore everybody has been buying them, pushing the price up. Before they were cheaper, but it costs quite a bit of cash to store a car in Japan for 3 - 6 months until they're elgible to import

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1061227
Share on other sites

For what? I just brought a TT Soarer over about 6 months ago and that cost bout $4500 in compliance, but that was because they were the only place in Adelaide who could do compliance and so they charged what they want. Now I think its around the $3500 - $4500 mark, depending on what car you get. Also, prices vary from state to state. However, for an '89 model GTR under the 15 year rule it only requires minimum compliance which is generally between $500 - $1000.

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1061832
Share on other sites

i kno it maybr illegal but does anyone kno anything bout Ghosting or rebirthing? saves the problem of having to go thro compliancing. or where i can pick up a GTR compliance plate? if so i might b able to get a 1992 GTR cheap, uncomplied so thats why im lookin for the plate.

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1063445
Share on other sites

Nicely put Max. Btw, what happen to the "flying chicken?"

I bought myself a GT2540, but been rip off by the jap (rare but it happen). The turbo was stuffed. :whip:

i might put in on eBay soon with the price i pay for it, feel sorry for "someone".

Then after a few thread about the weak gearbox i am not going to bother with bigger turbo, as i don't want to downgrade to 5 speed while not able to spend 5-6k for a nismo 6 speed.

the stockie will stay and a SAFC will going into the car soon.

so from now on my money will be invest on handling side, suspenion, bar, stablizer...

while a set of R32 GTR brakes with aftermaket rotor and pad has been pushased and going on the car soon, too.

It's all going to happen after the exam. :P

i am also thinking of getting a LS400 for daily as they seems pretty cheap - black, lower, 19" chrome and killer sound system... :D

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1073596
Share on other sites

if i was to get a 15yo GTR i wuldnt worry, i was lookin at a 92 - 94. but i found another importer that does way cheaper cars including compliancing. now lookin at a 1994 BNR32 V spec. has a couple 4 sale. i wasnt gonna steel no cars, i wanted to find say a smashed up GTR and get the compliance plate off that and then import 1 and stike the place on it. that was only an idea from a mate that use to work in import yards

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1077611
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
    • I have a r34 sedan 1999 manual converted need some help with my speedometer it only reads upto 98km and then stops currently still running the auto cluster any easy fixes no speedo drive is connected yet, if someone has a video for wiring up the manual speedo sensor with the auto cluster please send through 
×
×
  • Create New...