Jump to content
SAU Community

Recommended Posts

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

knore - finally they have fixed the forum up again to post. Because of payemtns still comming in, I have placed the final order today. I am hoping to make it a max of 2 weeks till it arrives to each individual person.

thanks

just personal expiriance here. not trying to start a fight

my walbro is maxed out. Im making 270rwkw @ 16psi out of my GT30

The pump, i feel should have held more than that, but the figures dont lie, and the car runs lean with anymore boost

im ditching it now in favour of a 975 bosch unit.

knore - finally they have fixed the forum up again to post. Because of payemtns still comming in, I have placed the final order today. I am hoping to make it a max of 2 weeks till it arrives to each individual person.

thanks

Cheers thanks for that

my walbro is maxed out. Im making 270rwkw @ 16psi out of my GT30

no shit ash, thats right on where i'd expect it to be topping out too on calculations :D Its good for the majority unless you want 300rwkw +

just personal expiriance here. not trying to start a fight

my walbro is maxed out. Im making 270rwkw @ 16psi out of my GT30

The pump, i feel should have held more than that, but the figures dont lie, and the car runs lean with anymore boost

im ditching it now in favour of a 975 bosch unit.

That's about what I would have expected of it. I'm only after 250-260 so that should keep me out of trouble.

Did you use the original wiring R31Nismoid?

  • 2 weeks later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Great to hear you are bringing it out of the shed again. Unless you have specific issues I'd just add the wideband, get a good tune and enjoy it. Certainly no point changing coils etc if they are working. If would add fuel pressure and e85 sensor if you are doing a general update but not if it runs OK and you are just getting it back on track. The other thing is smaller, modern twins, -5 are OK for motorsport but pretty laggy and old tech for street use (of course, if performance is the priority a modern single with twin scroll manifold etc is the go but not cheap). The final thing worth considering is switching to an ethrottle if drivability is still an issue, it should make things a lot simpler and smoother
    • Yeah pretty sure they are m4, but best to check, and perhaps use new hardware Also don't over torque them......there was that one time I lost an expensive engine after a workshop overtorqued one of those bolts and it ended up in the oil pump (no, I don't know why they removed the intake mesh either)
    • I might have to shoot them an email. Pity the exchange rate is so bad at the moment. BTW, thanks for posting that table makes interesting reading. 
    • Add these Sensors -Wideband, Oil Pressure, Fuel pressure, Intake air temp Good inspection of ignition system of coils, plugs and loom (12v feed and good ground)- a r35 kit is best bang for buck upgrade. A decent tuner should be able to see any issues with the trigger system- a link has good filtering but a good simple upgrade is the nz wiring bolt in kit. Check and replace all the fuel filters- you would be surprised at intank filter after a few years. Also good to check for any leaks on vac hoses and pipe work as has been said. No need to go overboard and spend big $$$ to enjoy the car. A quality tuner is getting harder to find as anyone with a laptop thinks they are a tuner. A link has great features to check sensor voltages and frequency inputs and easy to see live by pressing f12. The link can do a TPS & RPM fuel/ignition mapping on ITB cars then add a 4D table with MAP and ability to add a 5D to it (can help with economy at cruise with wheel speed vs TPS) Where are you located as that will help narrow down a good tuner ?
    • Reviving an old thread, I reckon my stagea is starting to slip. Car usually gets parked on a hill, narrow driveway so cant go up the driveway smoothly, anyhows, lately first gear feels "sluggish"? Not responsive. Feels like I gotta run the engine more than usual to get off the line...  Any recommendations for transmission servicing in Sydney? Or possibly just an excuse to go manual ?
×
×
  • Create New...