COIL SPRINGS & ABSORBER

[cefiro-rb20]

Can Anyone Guide Me Wat Is The Best Coil Spring And Absorber For My Ceffys...

[G0DF4Th3R]

Asri,

the Ceffy and the S13 share the same suspension so if you go down to the wreckers in Malaysia just lookout for any suspension that will fit the S13 and you can use that on ure car

personally, I would just use Koni / Bilstein shock absorbers instead of Jap brand coilovers because the roads in Malaysia are terrible lol and you will not be comfortable at all

[RiverSide]

Keep in mind that the spring rates are different between S13's and cefiros............this is not an issue when fitting coilovers but just be sure to get spring that are stiff enough.

I have never been to malaysia, so i have no idea how bad the roads are........would they seriouly be that terrible running coilovers? I love coilovers and will never go back to lowered springs combos again.

[cefiro-rb20]

thanks bro...for yur info...the road conditions is bad as usual...so long if we had the same samy vellu as our minister

[cefiro-rb20]

one more question...i had a set of adjustable OHLINS absorber previously attached to Cefiro A32,does it fit to the A31 or not? anyone can confirm this....

[jaik]

No it will not fit. A32 uses a FWD setup.

JK

[driftmeister]

Hi Guys

Do you have any part numbers for the koni's or Bilstein that suits the ceffy? I have been trying to source these for a long time. My previous setup was TEIN coilover but the front was leaking & there isn't any place to get it fixed here in Malaysia. Changed my setup to TEIN S-Tech spring (Medium strength) and standard kayaba absorbers. Handling is way too soft and it is beginning to get weak in damping.

With regards to S13 absorber, they are very short in length and the car will sit too low. We have bumps stops as high as 8"-10" inches and non friendly car parks ramps in our malls.

Appreciate all the guru's advice.

NFS