Jump to content
SAU Community

Recommended Posts

Hi guys im looking at buying a Skyline For my first car i want a R31 about but i want the TURBO got any advice on how to tell if the R31 is the RB20DET and the RB20DE im not that great when it comes to cars all i like to do is drive em oh and is there much of a power difference between the na and the turbo? i found a R31 1988 silhouette for Aus$2400 not sure what engine yet :P any help will be greatly appreciated.

Thx Brendan

Link to comment
https://www.sau.com.au/forums/topic/54361-r31-help-1st-car/
Share on other sites

have you looked into insurance yet? for a 1st car, a turbo might not be the best option..

i don't think any australian car came with the 2L Turbo, just the 3L RB30E engine, for a turbo, you will need to find one that has been converted, or an import.. or do it yourself.. either way would expect insurance to be a killer

i am pretty sure the RB20DET have "ceramic turbo" written on the cross pipe above the engine..

Link to comment
https://www.sau.com.au/forums/topic/54361-r31-help-1st-car/#findComment-1064651
Share on other sites

Hi guys im looking at buying a Skyline For my first car i want a R31 about but i want the TURBO got any advice on how to tell if the R31 is the RB20DET and the RB20DE im not that great when it comes to cars all i like to do is drive em oh and is there much of a power difference between the na and the turbo? i found a R31 1988 silhouette for Aus$2400 not sure what engine yet :P any help will be greatly appreciated.

Silhouette is the Australian built model and will have the RB30 engine unless it's been 'converted' to turbo which is unlikely for those sort of $$$

Link to comment
https://www.sau.com.au/forums/topic/54361-r31-help-1st-car/#findComment-1064695
Share on other sites

check out justjap for frontcuts, i know they had one a couple of weeks ago (it was a redtop)..

you wouldn't bother fitting a 2L non turbo, it would be gutless

your other option could be to drop a RB25DET into it :(

do a search here, or on r31 forums.. i am sure there is plenty of stuff out there

Link to comment
https://www.sau.com.au/forums/topic/54361-r31-help-1st-car/#findComment-1064851
Share on other sites

Even if you could do most of the work yourself a conversion wouldn't be the cheapest way to get a turbo. Motor, G/Box, ECU wiring, exhaust, brake upgrade, engineer's certification plus whatever labour etc $2.6K won't get you anywhere near it. You might manage to pick up a tidyish import turbo for $5K I've seen a few auto Passages (4door pillarless) go for that money. Manuals and coupes are harder to find for that money. A very tidy manual coupe with a few mods and some nice wheels probably won't leave much change of $10K

Link to comment
https://www.sau.com.au/forums/topic/54361-r31-help-1st-car/#findComment-1064858
Share on other sites

Your cousin should check out the car before you lay out any $$$...particularly the diff as they are prone to be very noisy/whiney (a known problem). Silhouette model should also have an LSD. R31's are solid, reliable cars when well maintained, but it's still 15+ years old and should be throughly checked.

[this is the part you won't like] AFAIC since this is your first car, you should get some experience with it in its standard (ie NA) form before going down the turbo path, not to mention the fact that getting insurance is going to be difficult and expensive.

Link to comment
https://www.sau.com.au/forums/topic/54361-r31-help-1st-car/#findComment-1064864
Share on other sites

Like it has been said,

The oz released R31 all came with an RB30E, about 114KW

The import HR31's came in RB20 Turbo and non turbo variants. The DET pushes out about 140KW+, while then N/A only does somewhere between 100KW - 110KW.

5K will probably get you an N/A import R31, coupe or sedan, but these are gutless as hell, no top end and no torque. You'd better off buying an N/A local R31, and save up money and mod that, or maybe do a VLT setup yourself.

You will be hard pressed to find a turbocharged import or local for 5K. Either fork out the cash for one already setup, or buy a stocko and DIY.

The other thing to think about is how you are going to maintain it? While 5K might get you an import, it will be barely there on the mechanical side, even still if you buy something else, theres rego and insurance to think about also, not to mention fuel costs.

Visit www.r31skylineclub.com you will find a wealth of information on the forums, just use the search function :( hope that helps

Link to comment
https://www.sau.com.au/forums/topic/54361-r31-help-1st-car/#findComment-1064927
Share on other sites

If it's your first car, then the NA RB30 is fine.

I'm suprised that predator was the first person to mention turbocharging the RB30.

If you've found a Silhouette for that price, grab it while you can.

Drive it around for a while, familiarise yourself with the car, and then chuck a turbo on it

Link to comment
https://www.sau.com.au/forums/topic/54361-r31-help-1st-car/#findComment-1065068
Share on other sites

spend a couple of hundred bucks on an advanced driving course, and just get use to the car..

better to have some money tucked away in case you find something wrong with the car...

then later on down the track look at upgrading etc..

Link to comment
https://www.sau.com.au/forums/topic/54361-r31-help-1st-car/#findComment-1065092
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
    • I don't have a printer, but could at least attempt to make a printable model.
×
×
  • Create New...