Jump to content
SAU Community

Group Buy: Braided Brake & Clutch Lines


Recommended Posts

  • Replies 108
  • Created
  • Last Reply

Top Posters In This Topic

Al,

I'm sorry, I'm going to have to pull out unless somebody wants to lend me the cash!

Bloody bill this this month and all my money is gone.  Plus I have to pay for the prototype AFM to TURBO duct some time this week.

BASS OUT

BASS,

Do you know what the AFM to Turbo Duct is going to cost ?

If so, I'll pay for mine in advance. Would that help ????

Fat.

Thanks for the offer, but I'm not sure exactly the cost of the ducts yet, and I don't want to take any money for them until they are prototyped and proven to fit all cars that I'm offering them for.

I think I should get slotted rotors before I get brake lines too.

Thanks again.

BASS OUT

Hey Al, what's the latest?

I see that some people are now looking to pull out. Are we in danger of getting below 15 and this thing turning into a house of cards?

I didn't receive a PM from you on Friday either.

Any light you could shed would be greatly appreciated,

Adrian

Well this friday i will PM all interested parties and for those that want clutch lines i will let you know how much it will cost.

Friday is not a deadline as such.  On Friday i will post details of an account to transfer money into.  Once i have all payments i will buy a ticket to MEXICO :P.

Alan

Hey Al, what's the latest?

I see that some people are now looking to pull out.  Are we in danger of getting below 15 and this thing turning into a house of cards?

I didn't receive a PM from you on Friday either.

Any light you could shed would be greatly appreciated,

Adrian

Yes Al, i'm just waiting for you to give your banking details and i'm there.

Thanks Al

Ian

doesnt seem to be going ahead. I contacted maltech myself and they verified the setup with AL but......

Been thinking about organising it myself but cos Im still a newbie and I dont have a trader rating - thought it might be 2 hard.

Any one out their that would want to take over this cos I am sure their are some people that would still want these products. I know I still do.

Give Al a chance. I think this group buy will still go ahead. I know he's been a busy boy.

I'll give him a call later and see if he needs me to take it over. I think he may be waiting for one or two more people as we are just short of the 15 ppl buy price.

I'll let you guys know............

SORRY :)

THIS IS NOW IN FULL SWING, JUST ORGANIZED THE PRICING WITH MALTECH AND HAVE RECEIVED THEIR ACCOUNT DETAILS.

The money is to be transferred into their account and upon receival they will post out the goods.

PRICES:

Brake Line Set: $345

Clutch line:$55

P&H: (to be added to line costs)

- Brake set and clutch lines or Brake set only:$11

- Clutch line only:$7

This delay was interly my fault and i do appologise :), work has gone hay-wire (12hr shifts) and i haven't been home in time to contact Maltech.

What to do:

1/ Transfer required funds into the Maltech Account

Bank: CBA (Commonwealth Bank of Australia)

Account: BSB:063879 Number:10111104

Name: Maltech

Description:SAU<>-<>B&C black (Note: B=Brake Set, C=Clutch Line)

EXAMPLE:SAU Al-R33gtstB&C red So i am ordering a brake set and clutch line with red end caps for my R33 gtst.

2/E-mail the guys at Maltech ( [email protected] ) with a full description of your requirments and make sure to quote the transfer description. The e-mail should have the following details;

- Full Name

- SAU username

- Money Tranfer Description (MTD)

- A full english translation of the MTD

- Postal Address

- Contact details: Mobile, home, e-mail, etc.

example:

Name: Alan C........

SAU username: Al

MTD: SAU Al-R33gtstB&C red

Would like the Brake Line Set and Clutch line to suit a '94 R33 Gtst Skyline with the red rubber end caps.

Postal Address: Street Number Street Name, Suburb, State, Postcode.

Contact Details: mob:04........, home:03 9... ...., email:[email protected]

Sorry Again, but i assure you that you will not be disappointed :D.

Alan

money transferred and email to Maltech sent!! :)

you can go Mexico now, Al :)

Actually i do not see/handle any of the funds, which is pretty good, as now you are dealing direct with the guys at Maltech. :D

One question, why is the "November Special" on nissansilvia.com only $340 including postage? yet here it is $345 + P&H ?

Link: http://www.nissansilvia.com/forums/index.p...showtopic=62910

;) Just hate it when it is time to produce funds and people post 5hit like that above, without finding out the facts first. :cheers: FFS! the last i looked Skylines did not use the same brakes, suspension, etc as a Silvia. These are a far superiour engineered cars, if you want to fit Silvia lines on your 34, buy it from there. But Skylines use a 2 piece hose and a divider block for the front lines, hence extra manufacturing cost.

If you want to be petty, take it up with Steve at Maltech, i have organized this buy for the interest of the club, have nothing to personally gain, as i have already got my set 3 months ago, without the discount.

If you had simply compared the two RRP's you could have seen that Skyline lines are $430rrp and Silvia lines are $405rrp. Thus there is a $25 price differance and here you are only paying $11 extra.

Al, it's not the money I care about... I just asked a question why the prices were different for what I thought were a similar designed product. lighten up dude...

Al, it's not the money I care about... I just asked a question why the prices were different for what I thought were a similar designed product. I also was in no way implying you were benefiting from this group buy. lighten up dude...

YoooHoooo....Got mine on Friday and fitted up and bled no problem.These lines are exactly the same as stock lines with the brass block in them.

Al is 100% right on the fact that the Skyline lines are more costly to make with the additional block and extra swedgings(spelling). You can notice the differance immediately when you stand on the brakes...much harder pedal. I think my rubber lines must have been soft after 10 years.

Thanks Al for setting up the fantastic Group Buy and thanks Steve (Maltech) for being so quick with the lines and supply.

I know everyone that buys these lines will be happy with them

Thanks again Al

Ian

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...