Jump to content
SAU Community

Recommended Posts

Hey Guys,

For all of you who dont read High Performance Imports Magazine or who havent seen issue 49 yet there is an article on whats required to do the r34 front end conversion to a wgnc34 stagea and who to contact in oz for details.

Not a bad article as it describes what else you need to buy apart from the front guards and so forth.

If you are interested check it out there is some good pics too

;)

Glenn

Link to comment
https://www.sau.com.au/forums/topic/54843-stageas-in-hpi-again/
Share on other sites

  mcnamg said:
Hey Guys,

For all of you who dont read High Performance Imports Magazine or who havent seen issue 49 yet there is an article on whats required to do the r34 front end conversion to a wgnc34 stagea and who to contact in oz for details.

Not a bad article as it describes what else you need to buy apart from the front guards and so forth.

If you are interested check it out there is some good pics too

:D  

Glenn

Do they say how much it cost's and if it would be legal in an accident, I wouldn't want to spend $10,000 have an accident and void your insurance due to fibre glass guards and bonnet.

Just a thought.

according to the article the only parts that masa supplies are the front guards. you supply everything else. most of the parts that they use are genuine nissan such as the genuine r34 radiator supports and headlamps and blinkers and so forth. bonnet is also genuine nissan or you can choose any other aftermarket one you want.

and no they dont mention price just says call ernie at skyline imports yada yada yada

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...