Jump to content
SAU Community

Recommended Posts

Im now thinking of importin the good ol r32 gtst.

Now, what are the main problems with importing? How do you really know you are not getting a piece of sh*t that some jap has absolutely flogged! Because the thing i dont wanna do, is import one drive it for a while then have to get a engine rebuild... new transmision... turbo rebore or whatever it is.

So how can you make sure you get a good car? With many importing places you see the car in a photo and have to choose within a few hours wether you want it or not. So you really dont know what you are paying pretty high cash for do ya?

Some one help me out before i make a decision.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/54924-problems-with-importing/
Share on other sites

Unfortunately there is of course an inherant risk involved with importing, it is for this very reason that impoting is not for everyone. Not everyone is happy to purchase with only a description and a few pictures.

If you are extremely concerned about this then i suggest you have a look around locally in dealers yards and privately, this will allow you to touch/drive the vehicle and have it checked out by your family mechanic.

You may well pay a tad more by purchasing locally, but if you feel more comfortable doing so then it is money well spent.

I'd nominate two considerations:

1. Find someone you trust to examine the cars. I'm importing through Prestigemotorsport and Geoff has warned me off several cars that pop up at auction because they're dodge.

2. Look for the auction grade. If it's a grade 4 then it's pretty good all-round. If you see the auction sheet and there's xxxx everywhere then you're rolling the dice.

when i imported i went throug j-spec.com.au. better to get an angent that has people to check the cars out in japan and better to avoid the only 1 day to buy bs as there is no need to rush. get them to get a mechanic to fully check the car out (will cost you about $250) but you will get a full report as well as about 80odd photos. put ya deposit down so they start looking for ya but take ya time and dont take the first car ya see, wati till ya get a feel for the types of cars that are avaliable.

i did it this way and my machine is a rocket with no problems whatsoever.

on the other hand, i bought my 89 gtst through prestige, looked awsome in the pics, and the condition notes said all was good. HA HA heres the kick in the teeth, i went to collect the car to see it with bald tyres, missing an indicater (found in the boot), parker lights not working, no water, crack in the front bar (not in pics, i looked) and a terrible miss in the engine. after later examining the car found it was pissing water out of the head gasket staight onto the turbo cracking it (still waiting for replacemnet), im a happy person so i still love my car i just wouldve rathered not go through all this stuff.

WHEN i do it again, i will be getting a under 15 year old car through sevs, i think it takes alot of the aingst out of it and at least a grade 4 auction value

depends what u want.. if you are getting a cheap car, you have to expect to have to do some work on it. I don't mind working on a car to fix little problems, I just see it as a challenge and part of the fun :)

If something is perfect it can only go down hill, whereas if something needs a little TLC you can only be happy with every little thing you do to it. My thoughts anyhow!

  • 3 weeks later...
depends what u want.. if you are getting a cheap car, you have to expect to have to do some work on it. I don't mind working on a car to fix little problems, I just see it as a challenge and part of the fun :)  

If something is perfect it can only go down hill, whereas if something needs a little TLC you can only be happy with every little thing you do to it. My thoughts anyhow!

His car would have been checked over by the guy in Japan and pictures sent. It is the fault of the guy checking the cars in Japan if he missed obvious problems.

So say if i were to import through prestige, would they be able to take the car i wish to buy to get it checked for accidents/compression/faults/etc, before i hand over the rest of the cash? Because i cant just buy a car by looking at auction sheets, if i cant feel or drive it, i at least need some checks done...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 馃槂
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
    • You talking about the ones in the photo above? I guess that could make sense. Fixed (but flexible) line from the point up above down to the hubcap thingo, with a rotating air seal thingo. Then fixed (but also still likely flexible) line from the "other side" of the transfer in the hub cap thingo up to the valve stem on the rim. A horrible cludge, but something that could be done. I'd bet on the Unimog version being fed through from the back, as part of the axle assembly, without the need for the vulnerable lines out to the sides. It's amazing what you can do when you have an idea that is not quite impossible. Nearly impossible, but not quite.
  • Create New...