Jump to content
SAU Community

Recommended Posts

Today i couldnt be stuffed going all da way to BP so i went to Shell to fill the car up. When i went to turn the car on it coughed a bit but started so im like oook then... so after about 3 minutes of driving in a 80 Zone the car lost all power and turn off. Without panicking i rolled it with the speed i had into the far side lane and turned the hazard lights on. I tryed turning the car on, it coughed but turned on, and than turned off a few seconds later, i tried this several times but it still wasnt going to happen. Then this ass hole in a Ford Falcon comes right up my ass and gives his horn a beating and im like wtf, then he pulls up next to me and creates traffic on a 80 Zone and i go "What the fcuk is your problem c*nt, cant you see the fcuken hazard lights, isnt the other 2 lanes enought for you" with out saying anything he pulls up in front of me and did the saddest burnout i have ever seen in my life.

So than i rang a mate up and he came down, we had to empty the tank and fill it up with some of his fuel, the car then worked fine.

Anyone else ever had buggered up fuel from Shell?

Link to comment
https://www.sau.com.au/forums/topic/55027-what-an-f-asshole/
Share on other sites

i hope u kept the fuel...

ive seen this happen plenty of times in other cars... generally water causes this.

You should be able to see it quite easily if u put it in a jar as they have different densities.

keep it and take it to the place and see what they say.... speak to the consumer affairs and also get a mechanic to do a full check of the engine etc.

u can take legal action against them.

theres been plenty of rain around here...

also if u have had the car checked out recently by a mechanic before you went there it would also work in ur favour.

this is true...  

which petrol station is it so we know to stay clear

I dont know the address, its the intersection one on Stud Road with BP across the road, and car lovers across that.

Coudlnt it be Petrol poisoning by mixing Shell with BP?? That could have caused something.

The tank was near empty.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Been over 2 months since I have done anything on the S15 and had a day off today so got stuck into mounting the radiator and intercooler. I ended up using factory bottom mounts as bolted in and I did order some gktech top brackets but didn't work with the PWR radiator so made up some with aluminium flat bar. Spent way to long on them but pretty happy how they are. Next job was the intercooler. Used some more aluminium flat bar and did the bottom mounts first. Top was easy as just one long piece and 2 90 degree coming off rad support and welded them on. The bumper support required some notching to let the outlets sit where I want so will add some reinforcement later to strengthen it. I have also bought ecu and waiting for it to arrive. Went with a Link g4x Xtreme but will be adding a ptmotorsport expander to add a few extra inputs over CAN. Went through a few different configurations on pclink to get what I want to allow future expansion for sensors and gearbox upgrades. Ordered gktech rear arms but looking at the hardrace lower control arms to have some extra adjustment too will see how the alignment looks after first setup. Got 2 more weeks of work before shut down and will have almost 4 weeks to work on this so planning on hopefully firing up mid January.   Also bought a 2015 brz with a heap of good gear, did noosa hill climb a month back. Owned it for 3 days changed alignment and sent it. Finished the weekend 2nd in class and only .3 off the 180sx best time last year. MCA Red coilovers, gktech rear lca, bolt on lock kit and tie rods, whiteline toe arms, cusco 1.5way diff and 4.5 ratio, endless brake pads, headers, exhaust, perrin intake and e85 tune. Electronic steering adjustment, nankang crs with koya wheels 17x9 +35. Have bought rear traction arm and relocation kit, extended studs and v3 tie rod kit. Planning on also getting flex tune as lucky to get 300km a tank with e85 and short ratio. Car is a heap of fun to drive and super easy to work on. AC in the line up at Noosa was mint in 35degree weather.
    • I'm 22 years younger than you mark, and I'm operating in the exact same way! Ha ha ha
    • All clamps are oem    one question is , what is the bit at the top on high pressure pipe where it connectes to intake manifold and other side goes toward the engine( see item in red circle in diabram attached)   ? Seen some people stating that should be removed on boosted application and skyline is boosted from manufacture so little puzzled. Mine is around 23pwi (700 hpish)   also some state it could be the bonjo bolt crash washer so bought two washers
    • what do you mean dead platform? People buy older, out dated and less power cars on "Dead platforms" for over $65k all the time.
    • That is really nice! Very nice finish when you have an oven to do the crinkling nice and evenly!
×
×
  • Create New...