Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

I was reading a write up on a comparison on the GT2530(I think) and the GT-RS in zoom I think it was, was a very goof read. I'll scan it in and post it if anyone was keen to have a look?

 

The end result was that although the GT-RS lacked a little bit in top end the mid range response was awesome. It was picked over the GT2530 but price is a bit of a turn off.

Could you send me a scan of this article. I'm very interested in the GT-RS turbo but now I wonder.

Thanks

I have been doing some research, and it LOOKS to me based on the comments throughout here on GT2530s etc that a TD05-big 16G from a Mitsubishi EVO3 (and some others) would do a similar job.

I think with many of the turbos designed for 2L 4cyl they would make a noticeable amount less on the RB25.. If you could get it rebuilt to more suitable A/R ratios and the like could be an idea though, esp if you're getting it for dirt cheap.

I have been looking at the GT-RS .. at $2500 for a "full kit" (+ taxes etc) its worth thinking about. I am not sure whether i want massive HP numbers to start with on a stock bottom end, and that looks like it fits the bill.

So consensus is around 240rwkw or so with a nice broad powerband? A dyno graph for rb25 would be very nice to see :)

Thought the gtrs was a bigger turbo - people seem to be getting more power from these than 2835??!!

strictly speaking, 2835 is a 400ps rated turbo, exactly the same as GT-RS.

Its the 2835Pro and 2835R that have the 420ps rating. Hence more power from the 2835Pro's that people such as grepin (287rwkw?) are getting. I think that was at 1.2 bar. So far ive heard a GTRS pull 250rwkw at 1bar, so they arent too far apart.

Hi guys late post.I got this quote from www.horsepowerinabox.com

I can do the GT2535 in the T3 flange internal gated for $1750, but not the

GT2530.

We also do a 500hp core unit with a .70 comp cover for the RB25 as a bolt on

Internal gate for $2150.

Regards

Do any of you know the garret gt2535 turbo's housing specs.Are they the same as HKS?

I also found a link to a site where HKS is compared to garret. clickey

lol dyno was at the wheels of course.........

mods are just the usual bolt ons so far

HKS gt-rs turbo

HKS 550 ccinjectors

greddy plenum

HKS fuel pump

splitfire coils

apexi power fc

HKS silent hiper exhaust

HKS type S intercooler

HKS evc

HKS metal flow

HKS sqv

HKS iridium plugs

few other bits and peices no internals yet so could pull more power easily....

There is a mountain of "garrett" vs "HKS" discussion in this very forum... its amazing

Do You guys know if garrett turbos are rated in ps atw or ate(at the engine)??Likewise with HKS.

pretty much all the turbos I know rate at the engine.. its only rough anyhow.. too many factors can vary it around.

Least you know the HKS is going to come out of the box working :D

lol dyno was at the wheels of course.........

mods are just the usual bolt ons so far

HKS gt-rs turbo

HKS 550 ccinjectors

greddy plenum

HKS fuel pump

splitfire coils

apexi power fc

HKS silent hiper exhaust

HKS type S intercooler

HKS evc

HKS metal flow

HKS sqv

HKS iridium plugs

few other bits and peices no internals yet so could pull more power easily....

NICE:)...all done at BD4s?...i bet Paul loves you:)

SAS have a good name around the traps of not leaning on engines too hard, and dyno figures being on the money...so very nice results with what should be a strong reliable combo:thumbsup:

Last question...what boost is it running to make that power and where is boost pressure being measured?

LOL...if you own an RB25:(

Yeh Paul is a tope bloke, runs a tight ship:thumbsup:...shame he hasnt gone crazy with the R34 yet:(

Yet is the word the big t51r sittin there waitin to go on..i went it for a spin it the other day to see how the shocks went....drooled the whole ride :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Man, you guys are like an all knowing encyclopedia.. how do you guys know how to fix everything?? but thanks. i will try to trace this wiring today. What is this globe thing you are referring too? Globe Power Supply? Are you referring to the light bulb?
    • Vinyl paint always ends up coming off interior trim and looking like arse. For the a pillar trims.....just try cleaning them with fabric shampoo? Maybe ditto for the headliner.
    • Hi everyone, I'm generally new to DIY projects, and I've browsed this forum and watched a lot of youtube videos but still have a few questions   Firstly, how does spray painting interior hold up? in particular like vinyl parts, my current mode of thinking is to use methyl spirits to take off original paint, clean/prep well, light coats, no primer or clear coat    Secondly, what is recommended for the headliner and, for example (my car is a r34), the A-pillars which are some kind of other fabric material, do you think I would be successful at retrimming these? or would it be better to go down the blacking out via Dupli-Color Vinyl & Fabric Paint    Any other advice / tips / tricks for refreshing/modernising these interiors?    Thanks
    • As title says  Pm a photo with what u have  Type m style would be good As Hidding a thick front mount
    • Just note that when trying to find a short in a globe power supply, it is best to disconnect the globe as it will allow current through to earth. With it unplugged it is easier not to get confused. Also with the r32 wiring, the high beam has 2 power supplies (one when you push the switch forward and the other when you temporarily pull it back; so if it is the high beam blowing you will need to trace both circuits
×
×
  • Create New...