Jump to content
SAU Community

Recommended Posts

R33 Series 1's have the front blinker with the small clear lense next to it, anyone no if this can be used for a fog/spot light? Or if a different light has to be brought? Anywhere in syd that sells them and prices?

If not too sure if you no what i mean check the pics out in my gallery/profile.. what the hek check them out and let me no what ya think of my 'line

Was an option I think, have seen a couple of S1's with this bit lit up like a driving light. Haven't heard of any kits to retro-fit lights to ones that don't have the option. I suspect getting the kit from Nissan would be expensive, the parts list for this assy is listed in FAST but there are quite a few bits to it!

If yours doesn't have fogs - they weren't optioned.

The factory optioned fogs have a 'shorter' orange section (notice the orange section of yours takes up like 2/3 of the entire width) to allow for the fog section.

Might be able to find them second hand...

I don't know if you can mod them - but I think it will be hard as there is not much chance there are reflectors that point the right way inside the clear section. What you can do is possibly tap the back of the reflector and put in a small socket and globe and turn them into parkers... don't know why you'd want to though

:D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm firmly on the "zero compliance is good compliance" for FUCAs. I'd be looking to solid metal joints even if the primary reason for having them is because they facilitate the twist in the arm. I have never been more happy with the way the front suspension behaves than I have since I got rid of the FUCA bushes. Even the thin little (short lived) poly bushes in the Whiteline adjustables have too much compliance for my liking. It probably won't be long before I have sphericals nearly everywhere, probably including both top and bottom arms in the rear, and I'll start complaining about the increased costs for dental work. But I will be enjoying the driving more, I'm sure.
    • Plus, you'll get great experience in bedding in pads!
    • I have offset Nismo brackets so the fact the gktechs can pivot is less important to me. I have 170mm JIC arms with bushings - but they provide no adjustment and I'm not sure whiteline eccentric bushings will fit them (I don't want to ruin the bushings currently in them to find out). Ideally I want something with bushings + adjustment; hence why I'd like to find a pair of these. Unfortunately they aren't easy to find.
    • @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
    • You miss spelled bearings...
×
×
  • Create New...