Jump to content
SAU Community

Recommended Posts

Hey guys,

I've got a question.

Barring all monetary and budgetary restraints, what would be the ultimate turbo for the RB25DET.

Not for ultimate power, as we all know you could just strap a monster to the side of it and make power from 6500 - 8000 rpm.

I'm especially interested in you tuners points of view, STT and SK.

Highest average output, best spooling etc. etc.

Interested to see answers.

BASS OUT

Link to comment
https://www.sau.com.au/forums/topic/55255-the-ultimate-turbo-for-your-rb25det/
Share on other sites

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

Bass, just comes down to how much power you want out of your engine... just look for the quickest spooling turbo which can get you the power your after. 3037's will get you nice power but is it worth sacrificing it for better response?? its up to you

Bass Junky, it might help if you were to give an approximate rwkw figure.

I would have thought 250-300 rwkw is enough, as I have not seen anyone with more than this get it down smoothly on a street car (but I may be wrong) IMHO over 300 rwkw is 4 wheel drive territory unless you are into lots of wheel spin and chewing up tyres.

I also realise that the shape of the power curve will allow cars with less power to light up, but a properly tuned (smooth and progressive power curve) motor with this sort of power should be drivable on the street.

Probably a nice low mount GT2540. Good response, minimal lag, and nice and stealthy low mounted. :)

You gotta be kidding, the 2540 is one mismatched comp/exhaust side turbo ever.

Bass

For an example at sandown on that sunday running around 255rwkw with my GT30 0.70 a/r comp 0.87 a/r exh i found that coming onto either the front or back straights at around 60 km/h in 3rd at around 3000rpm i had lag issues till i hit just over 4000rpm and came onto boost. If i took these 2 corners in 2nd instead i found that i would get wheel spin and axle tramp instead. I went for a ride in skylinegeoffs car before that and he could use 3rd coming onto those straights with his 'hydrid' turbo and come on boost straight away, but my car felt alot quicker on the straights.

Do you plan on joining the wang soon or just street driving?

I'm with B-Man.

The 2835ProS is an awesome turbo that is just right for the stocker internals.

Excellent response & average power.

To push upwards of 280rwkw od I would either do cams to lower bring the dynamic comp ratio to a safer limit or slap a thicker head gasket in there which effectively also lowers dynamic comp.

Obviously a set of injectors are on the cards.. But thats nothing a set of second hand GTR injectors + a resistor pack can't solve.

So... I would..

2835ProS

Nice FMIC & Exhaust

GTR injectors & Resistor Pack

Fuel pump

PowerFC

Z32 AFM

See how the power is then look at cams to make the motor a little safer and also increase the average power. :D

What do you guys think of the HKS GT-RS, for track use. Rated at 400ps , the hks GT2835 Pro S is rated at 420ps.

Seen it on nengun as a bolt on kit for the RB25det's

http://www.nengun.com/product_info.php?pro...4b067d1b19ad51a

So theres not much more difference between the gtrs and the 2530..And the 2535 is the turbo to go for for decent response excellent mid and good top end for rb25.

Spewing we will have to wait and see what croat can pull out of his hat.I was allready like this turbo is the one for me.What sort of price can the hks 2530 2535 etc be recoed back up for??

:)

With everything else in order, so you get the most out of the turbo in its efficiency range.. probably 2835 Pro or 30xx series

you should choose the best turbo for your intended/current setup, not the best turbo in general for rb25det

or something like that :)

hey peter that turbs doesnt look too bad!

Ide like to see some info on its actuall performance on rb20/5 sr20 etc

building a RB25DET with a TD06-25G, nice laggy turbo with good topend power, and a misfiring system to keep the turbo spooling while I'm off the throttle. The one that I've bought is a metal sleeve thingamajiggy (can't remember the name) so its not steel bearing or ceramic, and can withstand a lil bit more punishment than a standard turbo.

As a standard swap/upgrade for a R33 RB25DET i'd say get a 2530, but I dunno how they react to RB25DET Neo's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • All I can say Duncan is good luck and I hope that Neil did not run any E85 in Cheryl. I have recently experienced the full spectrum of fuel tank issues in my R33's that had been caused by E85 and contaminated fuel. When you take the cover off the top of the tank and have a look inside you will get an understanding of how easy it will be. Best case situation is clean fuel with minimal contamination. My GTR was like this and it was a very simple operation to just grab the fuel pump carrier bracket and slide it up and out of the tank. My three GTS_T's had different levels of fuel contamination that was probably caused by E85 in the fuel.  In the worst case all of the metal components in the tank had rusted to the point where there were pieces of rusted metal swirling around in the tank. This required the removal of the exhaust, the tailshaft, the complete rear cradle and the fuel tank. The components in the tank were that rusted that it took days to get the fuel pump carrier and the mounting brackets out of the tank. When the tank was finally cleaned, everything inside the tank had to be replaced. With the tank all back together I could then reinstall it in the car along with everything else that had to come out. Good luck and I hope that you find a clean tank.    
    • It is a two door. It is black and also still has the OEM wheels and stereo. Exact model would be KR_R32RGFEL_SS According to GTR-Registry.com is a 2 Door Coupe; RB20DE; 2WD no HICAS; MT.F5; (11L) Projector Headlamps and Fog Lights; (12_) Electronic Active Full Auto Air Con (Climate Control); (13-14SS) V Selection -- Which seems to be accurate description of my variant. Will try to upload a few pictures soon. The OEM wheels look like the below image. Image is taken from the goo-net-exchange website.  
    • Time: Saturday 18th January - 9am -10:30am Where:  Cafe By Lamanna 10 English St, Essendon Fields VIC 3041  - https://g.co/kgs/mhVKvAB Registration: So we can give the cafe a heads up on rough booking numbers please rsvp below Registration Link: https://forms.gle/wPtfj9Gp8bvCiouo8
    • Welcome Gabriel. At least your car has a glorious RB and not the shitty CA18. As MBS206 mentioned all the good bits can be added later. Two doors or four?
    • And half of them have been converted to turbos.
×
×
  • Create New...