Jump to content
SAU Community

Recommended Posts

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

i talked to a mechanic today that works at ford, and he says the f6 has 14 psi stock, and strengthened internals

but then you would think it would pull more than 270kw at engine with that much boost so i dunno

but yeh now they've got the better gearbox they're a hsv killer

Two problems with your statement:

1.No real mechanics work for Ford, they are all just apprentices and lube operators. They do not know a gearstick from a dipstick.

2. You mate is wrong, the F6 runs 9psi boost, not 14psi.

Two problems with your statement:

 

1.No real mechanics work for Ford, they are all just apprentices and lube operators.  They do not know a gearstick from a dipstick.

 

2. You mate is wrong, the F6 runs 9psi boost, not 14psi.

okies, yeh he is like a first or second year apprentice, i'd say he was just misinformed

what do they do if theres a problem none of the apprentices know how to fix?

so for 14k on top of the xr6t, what does the typhoon offer?

1. bigger wheels?

2. different bodykit?

3. new gearbox?

4. bigger injectors?

5. different intercooler?

6. remapped ecu?

what else?

Top of range interior

climate control

colour screen

FPV Dash

Centre mounted boost and oil temp gauges (Gay novelty ones)

stereo with amp and sub

Starter Button (wank)

Metal Pedals

270kw 550nm

Boost lifted to 0.64bar

Dual ram cold air intake

Heavy Duty Valve Springs

50% larger intercooler

Higher flow cooler piping

High Strength Con Rods

Oil Cooler from Targa Tas last year fitted to XR6T

Twin Plate AP racing clutch

6 Speed Gearbox (same as XR6T)

Revised Suspension setup

Revised Traction control setup

Revised LSD Setup

PBR Brake Calipers with Grooved rotors

FPV ECU Flash

18" FPV Rims

FPV Body Kit

A driver training course

Oh and injectors remain the same.

Not bad for 14K extra IMHO. I supose that's why I brought one :D

okies, yeh he is like a first or second year apprentice, i'd say he was just misinformed

what do they do if theres a problem none of the apprentices know how to fix?

They deny there is a problem or say its normal.

Ford service SUCKS:kick:

Top of range interior

climate control

colour screen

FPV Dash

Centre mounted boost and oil temp gauges (Gay novelty ones)

stereo with amp and sub

Starter Button (wank)

Metal Pedals

270kw 550nm

Boost lifted to 0.64bar

Dual ram cold air intake

Heavy Duty Valve Springs

50% larger intercooler

Higher flow cooler piping

High Strength Con Rods

Oil Cooler from Targa Tas last year fitted to XR6T

Twin Plate AP racing clutch

6 Speed Gearbox (same as XR6T)

Revised Suspension setup

Revised Traction control setup

Revised LSD Setup

PBR Brake Calipers with Grooved rotors

FPV ECU Flash

18" FPV Rims

FPV Body Kit

A driver training course

Oh and injectors remain the same.

Not bad for 14K extra IMHO. I supose that's why I brought one   :)

hrmmm they left the gearbox hey! i always thought that was a weak point of the XR6T?

go the typhoon! awesome buy im sure we'll be seeing/hearing more of it from you! :P

whats the towing capacity of a typhoon?

Well no the gearbox is new. The series 1 g/b was a 5 speed hunk of cogs. The new one is a 6 speed Tremag and is standard across the ford performance range for series 2 XR6T, XR8, GT, GT-P, F6. it is actually the same brand found in holden, however it is a slightly better example with some refinments on gear selection.

The Gearbox isn't the weak point as they are rated to safley handle closer to 700nm. The injectors are the problem, boost and power are restricted at higher rpm due to limits in injector duty cycle. Otherwise the 270fwkw would be higher.

I believe the manual's tow capacity is 1200kg, but if the auto comes out(which isn't due till late 05) you can get a 1600kg or heavy duty 2200kg tow pack like the V8.

mmmm, finally an australian new car i want to buy, maybe later when i can afford it.

The thing that annoyed me was,

Holdens boss was saying how the Australian public would get confused and that FPV and HSV should be V8 only brands.

How stupid do they think we are. I think they're just jealous.

i'm not really a fan of fords of holdens, but if i had to pick one, ford would probably be it.

commodore's (let's leave the fully imported astras, vectras, etc. out of this) are not advanced cars, and until the latest commodore came out with the new engines they had been using very old engines from GM.

negative comments from commodore fans about how V8s are the only performance engine are of course going to be biased. ford engines moved away from push rods have had DOHCs for quite a while now (i don't know exactly how long, but obviously longer than holden), and they compete well with the larger and more basic holden engines.

but then again, we're all biased. a lot of people here think that skylines are the best car on the planet :rofl: i think skylines were one of the best japanese performance cars when they were in production, and the R32, 33 and 34 models still compete with the best today, but they aren't the best car on the planet.

Personally I don't like the F6 because as someone else said it's still just a big, heavy family car that happens to have a 270kW engine. Sure, it's relatively quick in a straight line but even so, not that quick, considering the sheer number of kilowatts it has due to the sheer bulk of the thing.

I acknowledge Ford's efforts in moving away from the V8 'performance" car mentality, something Holden needs to look at. But I think, and no disrespect intended, that Holden fans are mostly V8 diehards with an ignorance of technology, twin cams and turbochargers.

It's strange how in times like these when petrol is getting more expensive each day that Holden can bring out a new "SS" with naff guard vents promoting its 245kW 5.7 litre motor with a prodgious thirst coupled with a big heavy car and still manage to sell heaps of them. Well it seems like heaps because all I see driving around is VX/Y/Z SS Commodores driven by middle aged women and guys who think they are racecar drivers and own the road. But I suppose in my bogan town nothing impressess the neighbours more than a shiny new VZ SS in the driveway. ;)

The second reason I dislike the F6 is that for the money you pay for it you are still getting an inferior quality car. I won't even go into the list of things wrong with NEW cars bought by family/friends from Holden and Ford. It's disgusting. I'm not saying Japanese cars are without their problems but I haven't experienced the same number of squeaks, rattles and loose trim etc in a 1993 R33 compaed to a 2001 WH Statesmen with a bung GENIII.

To me if you want a performance car and are serious about driving and not just using it as a status symbol to impress your friends, neighbours, whatever you can buy a far superior car for less money in the form of an import. Sure you don't get a warranty and it may be a bit older but it's a much higher quality car that can go fast, handle and look good

Nearly $60,000 for an F6? No thanks, give me an R33 GT-R or even a nice R34 GT-t anyday. I'm sure Ford will manage to sell plenty of them though but I look forward to pulling up next to one at the lights one night and seeing how a ten year old Skyline costing a third of the price goes against one...

Holdens boss was saying how the Australian public would get confused and that FPV and HSV should be V8 only brands..
Confused? About what??

Thats the kind of bullsh!t backward bogan redneck comment you'd expect from the boss of Holdem...

Torque gets heated  

By James Stanford  

November 5, 2004  

THE leaders of the Australian muscle car industry have clashed over the arrival of a Ford turbo blaster.  

The head of Ford Performance Vehicles (FPV), David Flint, and boss of Holden Special Vehicles, John Crennan, have spoken out against each other's brands as FPV releases the new F6 Typhoon. The Typhoon is a turbo-charged six-cylinder Falcon, which will be sold alongside the GT Falcon.  

Crennan says the arrival of the powerful six-cylinder model will confuse the brand image of FPV, while HSV is a clearly a V8-only brand.  

"I consider our branding and our vision and our plan to be very pure. The essence of good marketing is purity, and to a certain extent simplicity, and I look at the Ford side of things and I see something that is more confusing," Crennan says. "Is it Tickford? Is it FTE? Is it FPV? Is it FPR? Is it six-cylinder? Is it eight-cylinder? Is it supercharged?"  

FPV has introduced a new slogan, Performance Inc, to incorporate the introduction of a turbo six-cylinder car next to its V8 GT models.  

Flint says FPV does not have to stick to building V8 cars. "We are not the GT or V8 car company," Flint says. "We are the pre-eminent performance car company in Australia. That frankly means we are free to do anything we like."  

Flint says overall performance is more important than the amount of cylinders.  

"The business I am in is to develop performance motoring for whoever wants to be a performance motorists. If it was a four-cylinder, six-cylinder, five-cylinder, I don't frankly care, as long as we have got a performing chassis and drive-train is all that matters," he says.  

Flint disagrees with Crennan's comments about the negative impact the six-cylinder Typhoon might have.  

"I have a lot of time for John, he is an outstanding manager and a superb marketer. In this instance, though, I think he is not right," Flint says.  

"John believes that V8 is the pinnacle of all of it and we disagree."  

Flint also attacked the new 6.0-litre HSV GEN IV engine, which has slightly more power and torque than the FPV Boss V8 in the GTs.  

"Our V8 is a very hi-tech double overhead camshaft multi-valve engine, to me that is a more technical solution than an old push-rod engine (HSV GEN IV), but that's the way he (John) chooses to go and good luck."  

Crennan says consumers have the final say. "All I know is that for every 10 cars we sell, they sell three - and I'll let the numbers do the talking."  

--------------------

^

Autech,

Valid points. Just to stand up for "performance cars" which are also family sedans..

1. For towing a boat, an SS seems like a good *cheap* choice because it has the torque.

2. A lot of people have company cars and budgets can be restricting. You might want a BMW 5 Series, but if your budget is $60k you can only really go for a Calais or something. My friend's dad was in this boat - it was like a BMW 3.18i or a fully specced V6 supercharged Calais (or the equiv Ford). And also, the Calais handles very well.

3. There are performance sedans out there like the BMW M5, Audi RS6 which are considered to be awesome cars on the street and the track. You *can* have a performance car that is a sedan, it's just not traditional.

I used to own an R33 GTS-T which was an awesome car, but I have more fun in my turbo Audi A4 (Quattro) which is a sedan.

Personally I don't like the F6 because as someone else said it's still just a big, heavy family car that happens to have a 270kW engine. Sure, it's relatively quick in a straight line but even so, not that quick, considering the sheer number of kilowatts it has due to the sheer bulk of the thing.

You do have a point, I wouldnt put up with the heavy body but being australian it makes sense to have the room.

The engine has potential written all over it, I can see this engine being used in all kinds of cars. My next project is an AC Cobra and the turbo six is making it hard to stay with the 8's.

The next step up from an RB30DET?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
    • Every one has seemed to of have missed . . . . . . . The Mazda Cosmo . . . . . . what a MACHINE ! !
    • I might have gone a little more South Efrican.  But this is off topic.   😍😍 FD 😍😍
    • I think you might have skipped a whole vowel sounds there C.
×
×
  • Create New...