Jump to content
SAU Community

Recommended Posts

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

I love a 2 door us much as anyone does, but I needed a bigger 4 door, which rules out the only other 2 cars I would have considered, GTR or Supra.

Autech, what is so backward about a Ford F6 Typhoon? The engine is up there amongst the most advanced in the mass produced market. The Suspension is award winning. The car is heavy compaired to a skyilne but it is much bigger and has 2 extra doors. Even after all that, FPV have managed to engineer a quite respected trackable feel from the chasis that promotes very little understeer.

inark, I love the Tornado but for the life of me cannot understand why they are heavier and therfore slower than the sedans??? which is the case with all the utes in the entire BA range.

have you driven one? because i think you would be suprised yeah sure they are heavy but trust me they dont feel like it (well in the utes they dont and they are heavier)as ive said my next car will be an f6 more then likely and for 51,000 for the ute im preety happy with everything you get.

I used to own an R33 GTS-T which was an awesome car, but I have more fun in my turbo Audi A4 (Quattro) which is a sedan.

maybe in the backseat you would :P

you obviously weren't driving your skyline hard enough buddy! ;)

Personally I don't like the F6 because as someone else said it's still just a big, heavy family car that happens to have a 270kW engine. Sure, it's relatively quick in a straight line but even so, not that quick, considering the sheer number of kilowatts it has due to the sheer bulk of the thing.

The F6 is a GT (Grand Touring) car, NOT a sports car. hence, you're comparing a sports car with a family sports sedan. For what it is, it does well. for eg. i'd prefer to cruise down (with cruise control) to the snow in a soft (yet re-affirming) ride of an F6 to that of a cramped up skyline with 15 year old sluggish suspension or set of tein flex coil overs which hurt my kidneys everytime i go over a bump- do you see my point?

I acknowledge Ford's efforts in moving away from the V8 'performance" car mentality, something Holden needs to look at. But I think, and no disrespect intended, that Holden fans are mostly V8 diehards with an ignorance of technology, twin cams and turbochargers.

Ford is looking at market share - its as simple as that. They (Ford) acknowledge that the V8 market is taken. Holden has it, no questions, but who has the 6 cylinder performance market? the Mitsubishi Magna with Evo6.5 body kit??? a Toyota Camry??? I dont think Holden need to look at anything - they have moved from 5.0 litre cast iron block V8's to Gen 3 alloy heads to LS1 and now to LS2. They are progressing fine...i wouldn't call that an ignorance to technology id say thats you stereotyping more than anything....

It's strange how in times like these when petrol is getting more expensive each day that Holden can bring out a new "SS" with naff guard vents promoting its 245kW 5.7 litre motor with a prodgious thirst coupled with a big heavy car and still manage to sell heaps of them. Well it seems like heaps because all I see driving around is VX/Y/Z SS Commodores driven by middle aged women and guys who think they are racecar drivers and own the road. But I suppose in my bogan town nothing impressess the neighbours more than a shiny new VZ SS in the driveway.

You don't buy a performance car to skimp on petrol buddy. You may aswell buy a Honda City. That said, i only averaged 13l/100km and thats when my R34 GTT had close to 190rwkw with a tuned PowerFC. Hrmmm, have you asked any GTR owners how their car's thirst for petrol is???? Big and Heavy reads comfortable and practical - again, back to my first refute, you are trying to compare two totally different cars with different purposes.

The second reason I dislike the F6 is that for the money you pay for it you are still getting an inferior quality car. I won't even go into the list of things wrong with NEW cars bought by family/friends from Holden and Ford. It's disgusting. I'm not saying Japanese cars are without their problems but I haven't experienced the same number of squeaks, rattles and loose trim etc in a 1993 R33 compaed to a 2001 WH Statesmen with a bung GENIII.

To me if you want a performance car and are serious about driving and not just using it as a status symbol to impress your friends, neighbours, whatever you can buy a far superior car for less money in the form of an import. Sure you don't get a warranty and it may be a bit older but it's a much higher quality car that can go fast, handle and look good

I can't say much about the quality issues you speak about. My dad has gone through EA, EF and now an AU2 falcon without dramas and i have had a Subaru WRX and ER34 Skyline without any gremlins. I think its unfair to generalise this issue, but, i won't disagree with the fact that a Holden or Ford would be *more likely* to break than a japanese car.

Nearly $60,000 for an F6? No thanks, give me an R33 GT-R or even a nice R34 GT-t anyday. I'm sure Ford will manage to sell plenty of them though but I look forward to pulling up next to one at the lights one night and seeing how a ten year old Skyline costing a third of the price goes against one...

stock for stock, yeah so would i ;)

franks,

i'm sure my skyline would have been more fun on a track, but on the road i still rank my audi better (note the "I" - this is personal preference).

the skyline had it in the power department, but when you're going hard in a skyline i think you can safely say you're going at "book me a court appearance" speeds or screeching and sliding around corners.

with the awd i can take corners harder and generally stay closer to the speed limit, and it's a different drive. also driving in the wet isn't a dangerous affair, in my skyline with pirelli rubber (225s, rated very well in the wet), i still risked doing 180s around some corners, something *nearly* impossible to do in the audi with quattro and 235 dunlop sport sp9090s and traction control (i'm sure it's possible, but i'm also sure i'll never do it)

but this is based on the way i drive. the comparison would not be the same in an R34 which i believe comes standard with TC and a gt-r which is AWD and not RWD.

G,

franks,

i'm sure my skyline would have been more fun on a track, but on the road i still rank my audi better (note the "I" - this is personal preference).

yes, you're entitled to your own opinion and we all classify what "fun" is very differently.

the skyline had it in the power department, but when you're going hard in a skyline i think you can safely say you're going at "book me a court appearance" speeds or screeching and sliding around corners.

wether you are speeding in an audi or speeding in a skyline, you are still "speeding".

yes, it is very difficult to get tyre squeel out of an audi (or any AWD car) whilst getting stuck into it through a corner, i certainly know this because i always try and get my brothers B6 1.8t quattro to be more adventurous!!! ;)

as for tyre squeel, if you havent got the grip but more importantly, if you can't take a corner properly then of course you'll get tyre squeel cause you're overcooking the tyres. you can't automatically assume a RWD hi performance car will have tyre squeel when going hard into a corner!?!? i dont see Formula 1 cars squeeling all over the place? nor do i see the V8 super cars screeching around corners?

with the awd i can take corners harder and generally stay closer to the speed limit, and it's a different drive.  also driving in the wet isn't a dangerous affair, in my skyline with pirelli rubber (225s, rated very well in the wet), i still risked doing 180s around some corners, something *nearly* impossible to do in the audi with quattro and 235 dunlop sport sp9090s and traction control (i'm sure it's possible, but i'm also sure i'll never do it)

hrm, i'll have to agree to disagree. perhaps you should try going out as a passenger onto a racetrack in a fast RWD car to understand what real "driving" is, and experience some "fun" whilst you're at it ;)

The previous car to my old R34 GTT was a WRX so whilst i appreciate what you're saying with the AWD vs RWD "grip" argument i can't quite agree with you in saying that you can go harder in an AWD than a setup RWD car - though on dirt, definately yes.

but this is based on the way i drive.  the comparison would not be the same in an R34 which i believe comes standard with TC and a gt-r which is AWD and not RWD.

i never liked traction control in my 34! it slowed me down! :P it would come on mid corner and be totally pointless! ;) in the wet, yes, it was actually quite good - but i never really knew if the TC worked with the ABS unit though....i had a similar discussion with another group of friends who said that the R34 TC system just cut power to the engine - but when i drove the car it felt as though some brake balancing was happening.....

GTR's aren't AWD.

hey franks,

i think we are actually agreeing with each other. i've been in a mates 200sx going full bore (harder than i would dare to go), on the edge in every corner and using the whole stretch of road and it's exhilerating, but it's also dangerous (on the road, a lot less so on the track of course). i have faith in my mate's driving, but on a track someone isn't going to walk across the road unexpectidely.

so the bottom line for me is that stuff like that might be fun, but it's dangerous. i get a higher fun to danger ratio in my audi than my skyline ;)

franks,

I see your point in comparing two different cars and I realise that the F6 and Skyline are completely different beasts.

I have driven an XR6 Turbo auto and it was a very smooth drive and yes I can see how it would be nicer to drive everyday rather than a Skyline with rock hard suspension. I was impressed with the interior package which seems far superior to a Commodore, and dare I say it, an R33. The car in question had been back to Ford twice in six months for warranty work though...But yes, they are different horses for different courses.

In my own opinion, I feel that cars like the F6,SS et al are utilitarian vehicles with performance forced on them and they often struggle to conceal this.

Bang for your buck is great with the F6 or XR6T. While they are derived from a family car, they are built to a budget. You cannot compare a F6 with a 10yo skyline as they are totally different cars build for a different buyer. I can carry 5 adults and luggage and still blow the doors of most road cars. While I would swap it for a R33 4 door GTR in a flash, it does the job for me.

Aside from the build quality they are a great car, but you will not find better for under $60k.

Local turbo is nothing new... the VL? (Altough it was an RB :wassup: )

The worst thing about it is the ignorant reports that it should be banned because "...it can do 100km/h in 2nd gear!"

Beautiful car though.... but I would still prefer BFYB

Mulkers, I imagine when you say BFYB you're talking about the EVO VIII that won a coupla months back right? Yea, I'd definately be down for one of those!

If money was no object...I'd be looking in the M5, M3, vicinity and when/if it comes out the concept photos of the M6 look stunning. As you can see I'm a bit of a BMW fan!

I am a huge fan of the big fat Lamborghini's as well and a Vanquish, but now we're more into the Grand Tourers. M3, or EVO for balls out performance!

Idont think much about the new fords or holdens and think they are a mimic , as for holden or ford finaly found turbochargers think again do i realy have to give the history on these sh#t boxes ,twin turbo v8 commodores oooo and falcon's , remember the skyline vl turbo 2 fella's. Its not new but the ford's -holdens have found out the hard way.ps does any one know where mrgotrice went lol-had 2 b there .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Jdm DC2R is also nice for a FF car compared to the regular hatches of the time.
    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
    • Every one has seemed to of have missed . . . . . . . The Mazda Cosmo . . . . . . what a MACHINE ! !
×
×
  • Create New...