Jump to content
SAU Community

R33 GTS 511rwhp-Stock injectors DYNO


magic1
 Share

Recommended Posts

  • Replies 237
  • Created
  • Last Reply

Top Posters In This Topic

I give a lot to SAUWA, that will do me.

If you agree that your posting here is a business promotion justified by your contributions to SAUWA, you're mistaken. PranK would LOVE to hear from you.

Personally, out of all the bitching and whinging that's happened in this thread, I think the only thing worth knowing is how batch firing injectors works and how it applies to this scenario.

It was a new concept to me until I read this ridiculous thread but I'd really like some more detail on its application in the case of magic1's ride. If it is giving away a trade secret then I understand but shouldn't all Wolf dealers know of AND understand this technology? In which case, can someone that isn't Steve or magic post that info?

I'm sure that makes sense....or not...It's been a long day.

Thankyou.

Adrian

Link to comment
Share on other sites

LOL, This is getting to the point of unexplainable, There are so many strong counter claims agaisnt the original claims, so that makes the claims of the counter claims almost believable, and the unbelievable facts of the original claims would be regarded as the claims that the counter claims would like to counter claims against.

That pretty much what is happening here and this subject. It's all jibberish and B.S claim'original"

sorry i had to be blunt.

Link to comment
Share on other sites

I agree, I want to know how to do it aswell, if it can save me some $$'s and I learn something new than I'm all ears. But it seems that if steve tells us then SST wont have the ' edge ' over other workshops, from my point of view it looks like a sly business promotiom.

Nothing sly about it ....ing in your face

Steve tell something why cars can run at your dyno one day and come to adrenline and consistently run 10% below the next you and i both saw this on several car do this (including gotboost)does this show adrenlines dyno is out (ex summer nats dyno)to the low side or just high light inconsist in wa dynos

i can comply a list of car and figures if you so wish

but adrenline have had there figures disputed before ie commodore ute ran 330hp and he believed to be to low when to another and ran 332hp.

(not 438hp to 511)

if this trend were to true that (438) would be lucky to make 400 at adrenline

like gotboost last visit down here.

Link to comment
Share on other sites

If you agree that your posting here is a business promotion justified by your contributions to SAUWA, you're mistaken.  PranK would LOVE to hear from you.

Personally, out of all the bitching and whinging that's happened in this thread, I think the only thing worth knowing is how batch firing injectors works and how it applies to this scenario.

It was a new concept to me until I read this ridiculous thread but I'd really like some more detail on its application in the case of magic1's ride.  If it is giving away a trade secret then I understand but shouldn't all Wolf dealers know of AND understand this technology?  In which case, can someone that isn't Steve or magic post that info?

I'm sure that makes sense....or not...It's been a long day.

Thankyou.

Adrian

Hey adrian, im sure if u ask gtrken, he should be able to explain it to you , he did to me :(

Link to comment
Share on other sites

Threads like this make the whole w.a scene look dodgy, one sour grape spoils the bunch.

Why cant i get an answer to my questions?

Why post results if you're not prepaired to give methods?

Why do i have to fly to w.a to get information?

Well done on the power figure, but no one believe's you unless you explain how, simple as that mate.

Link to comment
Share on other sites

The starting storys is Bad bikis mates helping him out. Ask Tristan about starting, he laughed at PAS when the hardest car to start in the Antilag display had an M800 Motec.

I'd like to hear that from magic1 himself.

Threads like this make the whole w.a scene look dodgy, one sour grape spoils the bunch.

I agree with you, and that's sad because it's only this particular tuner. We here in W.A. look at this the same way as you easterners and think what a dickhead. This thread is all promotional shit, generating interest in the wolf, simple.

Perth Vs The Worlds in this thread.

More like Perth vs. SST, and Australia vs. SST

please do not associate Perth with SST, it's a beautiful place with many people who are generous and honest :(

Link to comment
Share on other sites

family comitments stopped me from attending the track last night, it will happen

Great so we are never gonna find out if your car actually has the power it claims, or how stock injectors can work like an injector double its size!!!

More than just the title of this thread is a joke

Link to comment
Share on other sites

Ask Sean (Gotboost) why his car was down.

Magic1 has been on 4 different dynos at comps and never been under 400rwhp.(415to511)

We will bring it to Georges next Dyno comp for sure, tell us when it is but it is not shootout accredited but George is an honest guy so i know i will get a fair run.

Link to comment
Share on other sites

Has anyone tryed to pass an ADR test with oversized injectors? Closed loop cycles close to stoic but a large injector gets very dirty just of stoic and even Motec cant keep them clean enuff to pass a test this is the reason i run the smallest injector i can get away with.

We have a new fuel system going to Vipac engineering early next week for Australian ADR approval that has already passed WA tests and with the years of R+D on this system we learnt a lot about injector control and have this car down to zero emissions and yes it is Wolf controlled as the Motec could not clip closed loop tight enuff.Any one in Altona victoria look out for this car at Vipac Wed.

Link to comment
Share on other sites

I used to be all "oooh aaaah" over peak rwkw dyno figures. And I still am to a certainly extent, I certainly do enjoy the whole dyno experience. But I always knew deep down that the peak rwkw number a dyno spits out is not the measure of a cars performance.

'IMHO' it's the piece of paper that I get after completing a successful pass on the drag strip that counts. Or for the circuit guys... it's the lap time that counts (obviously brakes and suspension play a big part here too) .

300rwkw, 350+rwkw - Yep, no doubt about it... they are awesome power figures and at a dyno comp or Autosalon they will gain you some "cred"...

120, 125, 130mph - Now that's what I'm talkin bout girlfriend! :(

I'd rather - 250rwkw and a 12.0 @ 120mph (2.00) than... 300rwkw and 12.5 @ 115mph (2.00)

My 2c

Link to comment
Share on other sites

ND4SPD is 142mph and we have many in the 120-130mph zone even my wifes near stock GTR runs 119.35mph with only 348rwhp. We have no shortage of MPH.

This forum has showen the bad side of me and very much so some of you guys and the shops that have been feeding some ppl from WA so they can have their say with out putting their name to their words so i am going to log off SAU for good and thank the many ppl that have sent me support and if those ppl need help they can email me and ill leave you guys to it.

Link to comment
Share on other sites

Ask Sean (Gotboost) why his car was down.

Magic1 has been on 4 different dynos at comps and never been under 400rwhp.(415to511)

We will bring it to Georges next Dyno comp for sure, tell us when it is but it is not shootout accredited but George is an honest guy so i know i will get a fair run.

Next sunday Adrenline Dyno comp for all interested persons 28/11/04

Link to comment
Share on other sites

Steve May

I have never had a problem starting my car.

Peter Blight whats the address in bunbury? do you have sealed roads there yet? (Joke)

Nguyen

my car cranks over 3-4 time before it fires i like this. as it lets me get a little bit of oil pressure. When i was about to start my car at pas i was teased "dont start on me cause your wolf wont start" something like that. I then noticed that the r34 with the motec was going to be moved, all i said was ''watch this''. 8-9 cranks later it started. i said nothing else as the looks on their faces was enough.

Inasnt.

moron i will get down to the drags and i will post my times for all.

Link to comment
Share on other sites

I used to be all "oooh aaaah" over peak rwkw dyno figures. And I still am to a certainly extent, I certainly do enjoy the whole dyno experience. But I always knew deep down that the peak rwkw number a dyno spits out is not the measure of a cars performance.  

My 2c

Ahh...yes.

Now you see the light. But what about the cement filled boot? You still have much to learn grasshopper. :)

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share




  • Similar Content

  • Latest Posts

    • Hi all,   I have bought a JDM R35 at auction in Japan.  This is my second JDM GTR after owning one back in 2009.  I have made a couple of videos that may interest some forum members.  One is collecting the GTR from the compliance shop (and seeing it for the first time) and another on the process of buying and importing a car from Japan.  I'm new to this and would appreciate your thoughts, as well as a subscribe!    
    • Sorry, AFM.    Will edit original post
    • Oh, yeah, no arguing that the duty cycle is different. And a circuit car will go to those speeds for more distance and longer times. But, I suspect that if a tailshaft has a harmonic problem, that it would cause damage and shit itself maybe even on the first pass. A second or two of running at the resonant/harmonic problem speed is already a couple hundred revolutions.
    • Shaft speed would be the same, however it's how long they hold it there for and repeated conditions. FWIW half way down the main straight at SMSP I'm bouncing off 4th with a 8600RPM limiter. That shaft would be spinning at 8600RPM for a few seconds before I need to smash the brakes, by T2 it's getting close to that speed again. Now a drag car/roll race car would see that shaft speed for a 1 to 2 secs then they would coast, hit the brakes and that's it.
    • With same diff ratio, tyre diameter and road speed, the tailshaft rpm is the same regardless of the gearbag's ratio. Given that very quick drag cars are probably doing similar road speeds to the fastest circuit cars (circa 300 km/h), and there will be many of either category that can't go that fast and so you'd have inummerable matchups between drag and circuit car speeds at smaller numbers, and given that they are probably using rather similar tyre diameters and probably using similar diff ratios, and...where any of those numbers were different they could quite easily be in opposite directions thus cancelling out.... I think you'd find that there'd be more similarity than difference in tailshaft speed between these two use cases, no?
×
×
  • Create New...