Jump to content
SAU Community

Recommended Posts

Q) I have BA Falcon and I don't like the stereo

A) Read below

My friend got his xr6turbo mark II yesterday and we went to garys car radio to check out stereo options for it.

Headunit and Engine Management System

The BA falcon head unit is part of the engine management system and if removed/disabled it will cease to function and render the car un-startable. The headunit system is about $2000 brand new if its busted or damaged. They can also be repaired for a small fee to a few select electronic freaks if the damage isn't too bad. There have been some cases of the unit being damaged by tampering and you have one of those two options, costly either way.

Premium Sound vs Standard

The head unit I am talking about is the sound upgrade option. Not to be

confused with the Premium Sound option which has the TV display. The upgrade sound option has a 6 disc built in stack and its the stereo control and aircon control in one.

3rd Party Headunits

If you want to install your own head unit it must be installed in another location, the first place would be where the cigarette and tissue compartment is. We had a look at a BA falcon today that had this setup. The only downside to this is the factory head unit is still there and still works, just no sound comes out of it. You can then tap your head unit into power, acc, ground and speaker wires according and the other downside is the head unit is down low and just in front of the gearstick

New speakers & Amps

If you opt to keep the factory unit which you can do then you can get the front speaker wires, install a stinger high gain adapter and use it as a form of RCA out. The stock headunit doesn't have RCA preamped/gain outputs so you have to use inline adapters. You can then run these to your own amps and replace the factory speakers with 6" splits and and subs and amp to your hearts content. We got an install that used the front wires with an inline adapter and this ran the fronts and rears on a 4 channel amp. The rear speaker wires from the stock head unit were plugged to a monoblock amp and the set off to run 2 x 10" subs.

Caution

We were cautioned about doing this setup in the event of spark or voltage surge the factory head unit could be damaged or placed at risk and then be up for some costly repairs. The solution was to use inline fuses on the speaker wire so they break before the voltage/surge gets to the head unit. Although not 100% a lot better.

Result

This was the most cost effective and easiest method whilst retaining the factory system as it has controls on the steering wheel to choose tracks etc.

The standard system is a 6 disc in dash changer so its not too bad as a full package.

Conclusion

It seems Ford wanted to prevent people from changing the head unit and tampering with its sound setup. If you want better sound and a better setup they wanted you to get the premium sound option.

:)

Link to comment
https://www.sau.com.au/forums/topic/55334-faq-ba-falcon-and-stereo-changes/
Share on other sites

fun stuff!

As an aside Nissan tried to do some similar stuff with the R34 GTR and the built in LCD display has no RCA input or any easy way to plug your own video source into it unless you option it when you buy the car. They had at least 10 different Navi/TV options you could choose from the factory and/or dealer.

Luckily nowdays there is a guide floating around on how to hook any NTSC video source up with a bit of soldering and I have done it on mine, installed a DVD headunit, and watched "The Usual Suspects" on the screen the other night. Works brilliant :P:)

fun car to work on. (BA) did one today with TV interface and a decent stereo as well.

this one had the premium system on it and I still have a bit of a probelm with engine noise on it . this is using the stinger line out units.

if you are playing with the unit ( IE pulling it out) have the keys handy.

still waiting for someone to throw a 34 GTR at me...

still waiting for an alternative mounting from aeropro. was talking to the local rep and he's says if theres enough interest then they will make one...

( I already get 5-6 called a week on VY commys.. same problem easier solution.)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...