Jump to content
SAU Community

Odd Request: help a follow SAU'er out :)


Recommended Posts

Hi Guys,

I have a rather odd request, and I was hoping someone in Japan might find it in them to give me a hand :) But first, the story.

Once upon a time...... ...... I bought a Skyline R32 GT-R from Japan. As some of you may know, it recently arrived. Anyway, apart from being a Grade 4 car it also had (notice the tense) log books.

However, when I went to pickup the car there were no log books. I have spoken directly to the supplier who purchased the car at auction and he said that a) he doesn't have them and B) its not at all uncommon for this to happen as the onus is on the seller to send them on, and they often don't.

Anyway, as luck would have it there was a vanity plate in my car from a car dealer. Putting two and two together I assume this is the company the sold the car through the auction system. It turns out they are called "Total Automobile Excellent" or "TAX" -- http://www.tax.co.jp/

Anyway, I was wondering if one of the Japanese breatheren would take pity on me and perhaps contact TAX on my behalf and enquire if they still have the log books in there possesion?

Thanks guys.

Lucien.

PS. Before anyone jumps up and down and assumes this was some huge conspiracy to hide the true odo readings, the mechanic that complied the car said it was one of the straightest examples he had seen and in his opinion the kilometeres were genuine. My interest is really for provinence reasons more than doubting the odo reading.

Link to comment
https://www.sau.com.au/forums/topic/55428-odd-request-help-a-follow-sauer-out/
Share on other sites

In all honesty Lucien I think we'd just get told that they dont have the log books full stop, end of story. These guys dont want to know about the car after sale, even less so after the thing has been exported...

Hey,

On one side you're lucky its only your log books. In my case in bringing in my soarer, i had the 12 Stacker 'Dissappear', the sun visor broken, some electronics hastily removed (bare wires, etc) and some other niggles with the transport company and wharfies.. on top of having my log books 'go'! So yeah.. just my 2 ¥en

Lucien, R32GTR manual, abridged version:

1. Pedal on right makey car go wheeee!

2. Pedal on middle makey car stoppy!

3. Pedal on left use to stop car go crunchy crunchy yuk!

4. Use stick in middle of seats and (3) changy gearu!

5. Big wheel in front driver to direct car holdy!

now get out there :D

I'll e-mail them Lucien, just give us as much info as possible about your donk, shassy, 2pak code, glove box diameter etc... :D

Just don't expect anything either positive OR forthcoming :)

I'll e-mail them Lucien, just give us as much info as possible about your donk, shassy, 2pak code, glove box diameter etc... :)

 

Just don't expect anything either positive OR forthcoming :)

Thanks Rezz: your a champ (who now has PM) :D

LW.

Your service records, in all probability, would have been in the 'other' manual (ie: not the one that tells you what goes where and what to push). I can't see why they would remove that from the vehicle, before export - unless it's policy to clean out the glovebox

edit: spellink

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As long as its NOT a HyperSHITtune, youll be fine.
    • First time visitor and currently getting ready to start work on my HK Premier.  Its all stock, 186 with 3 on the tree.  The only mod i have right now is extractors.  I am hoping to get some guidance on slightly modifying the engine to bring a little more power. Just going for a nice, comfortable cruiser.  The car is very straight, however i have been out of the country for 20 years and its been gathering dust at a family farm.  Will be doing quite a bit of body work to cut out some small rust areas (frnt quarter panels and a few other small bits) and fix up the paint.  Will be redoing the interior (its currently black and the seats are in real need of recovering and respringing the driver side (its front bench seat).  The dash needs a little TLC, but no real damage.  As my heater has degraded I am considering fitting something after-market that will be both heater/AC (recommendations here are always welcome). Wanting something discrete that will allow me to use the same controls and not be obvious once inside the car.   For the engine, i have been told i could consider upgrading my cam (imagine i would need a new head as well) and putting a new carby (currently the original stromberg).  However not sure what is going to be the best route.  Would certainly welcome any comments/suggestions.  As  a final step I am looking at changing the wheels. Current hubcaps are in dire need of refurbishment or replacement (imagine its a bit like hens teeth).  Thinking of some clean/classic looking mags (7-inch should be more than enough - not going for a large change in look).  Welcome any comments/advice and of course any questions. 
    • I got the ARC M079 due to the space constraint.  Been running mint for the last 3 years.  Plazmaman also seems like a really solid choice but not used myself.    Hunt around for a better price but this is what I have - https://www.rhdjapan.com/arc-brazing-intercooler-smic-m079-bnr32.html
    • Wanted to follow up on this. Did you end up getting the M073? Still deciding on what to get between nismo m073-79 and plazaman.  
    • I was just watching these boys up in QLD AWD'ing their S13 too.  
×
×
  • Create New...