Jump to content
SAU Community

Stagea - Idle increasing when brake is pressed !

Jay95R33

By Jay95R33,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Jay95R33 Grand Master

Jay95R33

Posted
Posted

Howdy fellow Stagea owners :P

A strange thing happend this morning when I started the car up.

Did the usual and let it warm up a bit before driving off but as soon as I pressed the brake lightly the revs increased from 1100 (cold) to 1500. Take the foot off the brake and the revs dropped back down to 1100 again.

Got to work and the car was warm. Normal idle is about 700rpm, lightly press the brake and the revs increased to ~1100rpm. And putting around the car park slowly in D I could feel the revs increase as I pressed the brake, so it does it in D and N/Park (it's an auto !!).

Strange... The first thing I thought of was an air leak in the brake booster or vacum hose going to it - but being at work I haven't had a chance to pop the bonnet.

Any ideas ?

J

mcnamg Veteran

mcnamg

Posted
Posted

that sounds weird but i have heard of this before my wifes ford fairmont used to the do the same thing couldnt for the life of me figure out what it was but once i flushed the brakes and fitted new pads all round and put new front discs on it went away. I would be very interested to find out what the problem is.

Sydneykid Grand Master

Sydneykid

Posted
Posted

Hi J, common problem, you just lead a sheltered life. Has the brake pedal effort increased noticeably since it started this? If it has, then it's a hole in the brake master cylinder diaphram, ouch not cheap. If the pedal effort hasn't increased (even slightly) then it's the one way valve in the line from the plenum to the master cylinder, it stops boost getting past. If the pedal effort has increased a lttle bit (maybe hardly noticeable) then it's the hoses/clamps, either the clamp/s will be loose or one of the hoses has a split in it.

Hope that helps, please let me know what it ends up being:cheers:

Jay95R33 Grand Master

Jay95R33

Posted
  • Author
Posted

Thanks for the replies guys.

This is the first auto I've owned, so I'm a bit nude when it comes to this wierd transmission stuff :D

OK, drove it home this afternoon (had the arvo off :P ) and it's stopped doing it which is good.

Another good thing is that the pedal feel/hardness hasn't changed a bit. Not even the slightest.

So I'm hoping that it's the valve in the vacume line to the brake booster or just a loose clamp. I took the AAC valve off over the weekend and cleaned all the crap out of it, and while I was doing it I was leaning and hanging off a few hoses, so maybe I've loosened one a little or pulled on it a tad to hard and cracked it :)

I'll give it all a good look over and post up how I go.

One other thing that I've noticed (and is the reason why I cleaned the ACC valve), is sometimes going from D to park (or even netural) the revs will hunt a little for a few seconds.

It sort of drops low then comes up and drops a little then then settles at normal. It's not as bad (or frequent) now that I've cleaned the crap out of the ACC valve, but still does it a little. Oh, and it has never done it when the air conditioner is on.

J

Sydneykid Grand Master

Sydneykid

Posted
Posted

Mine idles beautifully and the revs increase by less than 100 rpm for an instant when the brake is depressed and then it quickly returns to its nice stable 700 rpm.:D

Terminal Grand Master

Terminal

Posted
Posted

Mine idles fine, and i just clocked over onto 110,000km.

My R33 used to idle weirdly, and i narrowed it down to faulty AAC valve or TPS swtich. same engine so maybe similar problems?

Jay95R33 Grand Master

Jay95R33

Posted
  • Author
Posted

Cool, yeah the funny idle only happens when you move the shifter from D to Park. Doesn't do it when moving from Park to D or when the air con is on. Appart from the funny problem yesterday, pressing the brake has no effect on the idle.

The 'idle increasing when the brake is pressed' hasn't happend since yesterday, so I think the valve just needs a clean.

I'll rip it out on the weekend and give it a hit of WD40 and brake cleaner :)

J

BensDR30 Experienced

BensDR30

Posted
Posted

The idle on my RS4 occasionally drops to around 600 instead of the usual 700 (which makes it stumble when accelerating from a standstill). It has also been known to hunt between 700-800 when in N (like the AAC is oscillating). I think a clean-up might be in order....

It is perfectly normal for the rpm to flare slightly when depressing the brake - but no more than a few hundred rpm max. If you pump the brakes repeatedly you should be able to get the engine to hover around 1000rpm. It will then settle back down when you stop (handy for old cars that have dodgy chokes!).

  • 3 weeks later...
Russ114 Newbie

Russ114

Posted
Posted

have you checked for leaks in and around the brake booster?

if the pedal feels normal, but pumping it increases engine revs it normally indicates a vacuum leak in the power assistance. It shouldn't affect your brakeing capacity, but might interfere with ABS and will rev the engine etc..

it could be something else, but from all the cars i've seen with a similar problem, it's normally a vacuum leak somewhere

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • drifter17a
      Short shifter r34

      By drifter17a · Posted

      Way more than 1cm. Appreciate the advice maybe I try changing the bushing first
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      IMG_8641.mov     She doesn’t sound the best but starts with out using any gas now. I just ran some injector cleaner through her. started roughly the first time after adding it but gave it the beans slowly upto 4k, Must have cleaned a few cobwebs out. another step in the right direction for the sub
    • Kinkstaah
      R34 Diff oil

      By Kinkstaah · Posted

      Sadly I can confirm if you are actually seeking to drift, you will quite easily spin up one wheel. Even if you're going in a straight line. I am not entirely sure of the metrics/terminology here but there's only a certain amount that the helical will actually spin both wheels. I've seen it on video with my own car where two lines of smoke switch over to just one after you really get in to it. Unlike with a clutch diff where you can keep your foot planted until the car regains grip, in my experience with the helical you want to be utilizing traction control allowing LIMITED slip or lifting (partially) when you start to spin up both tyres with a Nissan helical. Which makes them pretty sub optimal for drifting duty. That said... this is probably a helical on numbers alone. Just put the Kazz in
    • GTSBoy
      Short shifter r34

      By GTSBoy · Posted

      Let's just fix the problem by f**king the rest of the gearbox.
    • GTSBoy
      R34 Diff oil

      By GTSBoy · Posted

      Unlikely, as per Greg's post. This is not helical diff behaviour unless one wheel is up off the ground. Shimming what? You don't "shim" a mechanical LSD. Probably not in the sense that you have heard of people "shimming" a diff. And the process that Nissan f**kwits call "shimming" a diff involves super-preloading a VLSD cartridge against the side of the diff to create a friction/wear point (in a place that it wasn't supposed to have one) to make the sloppy, useless, viscous diff into a hybrid viscous/mech abortion. In case it isn't clear, I consider the process to be stupid. Nike.
×
×
  • Create New...