Jump to content
SAU Community

noisy short shifter normal??

(B1) MR_fanny
 Share

Recommended Posts

(B1) MR_fanny Grand Master

(B1) MR_fanny

Posted
Posted

hey guys, i just installed a C's copy short shifter in my 33. installation was easy thanks to pranks DIY and it feels great, very solid and short. but its damn noisy as in i can actually hear the gearbox whine through the gears over the exhaust note. no noise prior to installation 2hrs before. just want to know if this is normal for a short shifter because of the way that its fixed onto the gearbox thru the base plate and clamps and that it transfers the noise of the gearbox thru the shifter itself. is this normal?? if not how can i reduce the noise?? my skyline sounds like my dads old crappy datsun:D:D

Link to comment
https://www.sau.com.au/forums/topic/55557-noisy-short-shifter-normal/
Share on other sites
rs73 Grand Master

rs73

Posted
Posted

It made an awful lot of noise on my car when I put one in, it was really loud and horrid. Ended up taking it out and sell it within a week. That was C's.

Not sure about Nismo short shifter, has anyone tried it? Perhaps Nismo one might be quieter?

(B1) MR_fanny Grand Master

(B1) MR_fanny

Posted
  • Author
Posted
probably due to the fact that the new shifter is a solid core, where as the original r33 one has a rubber-filled core to reduce stiffness and noise transfer... this is normal

that makes alot of sense, i can even hear the starter motor turning over chrisply thru the shifter itself..its bizzare. glad to hear that this sound is normal though it is slowly driving me nuts:D:D

~Hypnotik~ Rising Star

~Hypnotik~

Posted
Posted
It made an awful lot of noise on my car when I put one in, it was really loud and horrid. Ended up taking it out and sell it within a week. That was C's.

Not sure about Nismo short shifter, has anyone tried it? Perhaps Nismo one might be quieter?

I'm not sure about the Skyline Nismo shifter, but I know that the Nismo S13 Silvia/180sx shifter is no where near as short as the C's S13 shifter. The extra noise is the same with the S13 C's shifter so I've been told.

silva33 Mentor

silva33

Posted
Posted

i have no idea what is making the noise, the top clamp is very tight... now that u mention it i might see if there is a gap between the spacer and the top plate / clamp..?

does the fact that it is solid have anything to do with it?

does it matter if the 'wave' washer is under the spacer rather than over it? its difficult to fix as i have no idea what is actually the casue..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • pez5
      ST Coilovers by KW SUIT Nissan Z33 Infinity G35 Coupe

      By pez5 · Posted

      PRICE  : $1400 LOCATION   : NSW Central Coast FIT  :  All Nissan 350Z type Z33 and Infinity G35 Coupe. See delivery note. Hi, brand new, unused, still in the box.  ($1850.00 is what i paid ) My bad luck !!! I thought my right front  Bilstein was cactus so i bought the ST 's to replace all.  Turns out the right front is fine ( loose mounting after service  by a well known importer of Bilsteins ) So im selling the ST's. They are made by KW ( no intro needed ) . Iam on the Central Coast and im willing to meet up in Sydney metro, within reason and Newcastle.
    • WMDC35
      RB20DE NEO smallbox clutch.

      By WMDC35 · Posted

      Yep, yeah would need to do the flywheel although the 6 bolt NA clutch can handle a 20de if just wants to replace the stocker.
    • GTSBoy
      braided lines for the turbos

      By GTSBoy · Posted

      No it's fine. Heat sleeve is a thing. With oil running through it it is unlikely. Engine off heat soak can be a thing though. There is no way that you have a leak through the hose. That has pressure behind it and any small hole will turn into a large one in very short order. It is so much more likely to be leaking from the connection.
    • GTSBoy
      RB20DE NEO smallbox clutch.

      By GTSBoy · Posted

      Really? That's piss weak. I didn't know they hobbled the shitboxen that badly. OK. So probs need to buy a flywheel too. But that's not too bad.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Hi all. I already posted some newbie-ish questions here and there but this will be my first "big" post. Last summer I went and fulfilled a kind of childhood wish, because I just thought I needed this experience in my life no matter what. The car I bought is a mildly modded 1995 BCNR33 Vspec. It was repainted to a metallic orange color all around and it had all windows reseated. Not so well done black respray in the trunk and a metallic black in the engine bay. From outside it looks very nice except for a minor paint error on the roof and the rear spats needing new adhesive tape. The inside is pretty clean and no broken plastics, missing or faded buttons. Even the adjustable mirrors and trunk antenna work like a charm. Despite a moderately long list of issues I don't (yet) regret buying this car. Most mechanical problems are just due to age, like worn rubbers here and there. The underside sadly has lots of corrosion, especially to the back. It looks like it either has been driven in the winter for a while or it lived near the saltwater in Japan, the rust is nothing terrible but it'll require to be looked after. Mostly panel gaps and all the mounted components underneath are a bit crusty, but I don't think anywhere has progressed so badly that there's going to be holes. Front right jacking rail is crushed and needs some care so it doesn't develop into a rust crater at some point. Worst part is definitely the strut towers. I thought they looked fine but after taking off the strut bar I noticed that it actually started bulging up on the passenger side. Probably would have passed on the car or negotiated down by some thousand Euros more if I had noticed this before buying, but here we are. Trunk area also has signs that there was a water leak to the interior once but nothing too crazy, I guess lots of Skylines had this at some point. As for the list of (known) issues, I'll try to make this compact. I hope the coloring is self explanatory. Mechanical: -Various busted or soon-to-be busted rubber bushings and ball joints. Will replace ball joints with OEM or better and bushings with polyurethane where possible. -Shaking steering wheel at above 80kph -downshift from 5th to 4th is a bit crunchy unless I rev-match, might just try to renew the shifter assembly, but it's not a priority issue -tailshaft centre bearing could use a replacement, is it worth going 1-piece tailshaft as it doesn't look too fresh all around? Chassis: -underbody corrosion on many spots and in hollow spaces, needs to be treated -corrosion on many bolts, hoses, lines, suspension components, subframes, will be treated when replacing of the bushings is needed as time goes on -strut tower top panels and some of the surrounding panels are rusty, so needs fixing. Will look into doing this with a buddy in the winter, otherwise bite the bullet and pay a professional -driver side door is misaligned to the body and needs to go a slight bit more inwards -both door windows are misaligned and have an airgap where the window meets the door at the B pillar -The Aerocatch latches for the bonnet have locks but no keys, need new keys. -driver side door window is kind of gritty and could use a polish -damaged jacking rails and front frame rails, from people lifting the car the wrong way, might have this fixed by a bodyshop Electrical: -Nismo tachometer is just bouncing and displaying nonsense, supposedly worked fine when the stock ECU was still in the car -An old Greddy boost controller sits on the dash which will be removed as it servers no purpose anymore. -a led segment rpm gauge is on the steering column, will probably also be (re-)moved once the Nismo tacho is working correctly -there was an attempt to make the sound system better by the previous owner but it was just inducing noise all the time, ripped out the amp and filters in the back, no music for now -trunk antenna goes up as long as the radio is on regardless of the mode, I want it to only rise if I choose Radio specifically or per switch -3rd brake light is a bit dimmer than the taillights but everything was converted to LEDs so mabye now it just seems dimmer? -reverse light flickers, have to test if that behavior changes when I fiddle with the gear stick. Hope I can get around changing the switch. -Left side taillight, blinker section has minor water intake and is humid after washing. Other side has a hole in it, probably for that exact reason. I'll probably reseal them entirely and plug the holes. Engine: -minor coolant drips on one or the other hose -rear turbo leaks oil onto the exhaust making the car essentially undriveable due to fire hazard -Oil filter relocation kit has an oil drip at the Dash lines, will probably make a new connection there and tighten real good and pray -throttle body assembly is slightly stuck for the first throttle pedal input after sitting for a while I'm always open to suggestions and advice from more experienced people, I'm sure half of this list is easily dealt with and just requires some time and effort to sort out properly. Once I have some proper pictures of the car I will post some in this thread, I just have to remember to take some more once I get the chance to. Will post updates when I have news on anything, I want to try to keep this thread as kind of a logbook as well. Ultimately my goal for this car is to just enjoy it. An engine rebuild is probably going to happen sometime as well, because it is old after all. It will never be fully new again, I am just not that rich. But I want it to look good, work well and not rot away while I drive it. I'm probably gonna spend a lot of money on this journey, hopefully not an unreasonable amount.
×
×
  • Create New...