Jump to content
SAU Community

Recommended Posts

hi all

on a budget so which computers are worth it and not?

i have a rb20det with FMIC, 2.5 exhaust...

looking around, these seem to be the best value

E-Manage

Apexi SAFC

jaycar safc (tuning would be a problem though?)

so basically they are all piggy back units..

the apex SAFC would be simpler to tune by your self where as the E-manage needs to be tuned via computer...

any input would be helpful

thanks

Stock Rb20 det computers are tuneable - most reputable shops in Sydney should be able to retune your computer to make better power.

If you ever come to QLD I know a bloke who knows rb20's inside out - has tuned literally hundreds of them.

Can't recommend him enough.

Anything to do with the fueling you wouldn't really want to be tuning by your self.

Fueling really doesn't do a whole lot. Its better than nothing but once you can start fiddling with all the load points, ignition timing & fueling together thats when you get some decent response & average power.

Stock Rb20 det computers are tuneable - most reputable shops in Sydney should be able to retune your computer to make better power.

If you ever come to QLD I know a bloke who knows rb20's inside out - has tuned literally hundreds of them.

Can't recommend him enough.

Who out of interest???

Std computer rechipped is the cheapest option.

We charge around $700 including dyno tune to suit each specific vehicle( not a generic chip).

Factory puter is a very good thing and we have RB20 R31's with 280-300rwhp working great plus SR20's , using a plug in board running 400rwhp.

Cheers

Ken

E-Manage

Apexi SAFC

jaycar safc (tuning would be a problem though?)

i would stay awy from the Jaycar version of the SAFC but thats just me.. i dont know if i would be daring enough to use something like that..

however, out of that list i would go for SAFC.. or as otherrs mentioned earlier, rechip the stock ECU.. i think Toshi on these boards does it for quite cheap but i personally have not tried his

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, I’m currently running a str pipe hi low hks exhaust and downpipe. Was wondering if I change out muffler to a titanium one will it change the sound of the exhaust? Plus I have always liked the look of the titanium pipes … anyone have recommendations to one?    side note already have titanium intake pipes. 
    • I looked up my other car that is a R33 GTST series 1.5. Anyone able to confirm what a Aero Form Bumper is?     (1G) 2 Door Coupe; (2GK + 11V) RB25DET; (4B) 2WD HICAS; (7F) 5 Speed Manual; (14G) Super Fine Hard Coat; (15U) Large Rear Spoiler + Aero Form Bumper + Rear Wiper (Aero Selection)
    • Ha ha, all good! I've almost caved in and realised I'm buying one.  I know myself well enough by now that I will start chasing ADHD butterflies half way through building it and not finish it so I'm better off spending the extra money buying one instead of making one just so I can get into straight away.  I would very much enjoy making one as fabrication is probably a strength and definitely a passion but I don't want that to be at the detriment to the car I'm ultimately building it for! There's some pretty good ones around for ~$1100 at the moment so I think I'll just go that way.  At the end I sell it or as mentioned, get another project to make further use of it! Thanks gents.  
    • That link was very helpful thank you.
    • That is the option code, not the VIN. Regardless all of that production is considered series 2: https://gtr-registry.com/en-ecr33-vin-table.php
×
×
  • Create New...