Rb25 Turbo Upgrade, All Dyno Results

[Shockster0429]

Dynoed my rb25 powered s-13.

mods: Hks Pod

3 inch back

FMIC

10 psi first 2 runs 11 psi 3rd run.

rest is standard

[evil_weevil]

Hi!

R33gtst

just jap fmic

unifilter pod and airbox

3 inch dump and cat back

turbo smart single stage boost controller

12psi

hks fuel cut defender

195.3rwkw

stock turbo,injectors and fuel pump

dyno graph to come

big cheers to the guys at UAS - awesome work

[evil_weevil]

hope this works....

http://www.antilag.com/forums/attachment.p...mp;d=1159084551

[Silva32]

Hi All,

I have a R32 with RB25DET with the following mods:

R33GTR FMIC

Full 3 inch exhaust and hi flow cat

HKS 2535 turbo

Wolf 3D engine management system

Upgraded injectors

Pod

Upgraded Fuel Pump

Its first dyno was on 12psi for 230rwkw, with the fuel leaning out, so am replacing the fuel pump and winding up the boost to 17psi. I will post results later on in the week when the work is done and the final dyno is run.

Silva32

:sorcerer:

[race_snooze]

r33 GTST

Remapped Nerve Essential ECU

HKS 2530

Splitfire coils

4" Magic Cat apexi exhaust

HKS pod

FMIC

Stock injectors

Stock Reg (will be up grading)

Stock Pump (will be up grading)

18psi

Edited September 27, 2006 by race_snooze

[silva33]

A good mate of mine just made 252rwkw.

Stock RB25

HKS 2535

Injectors

GTR Cooler

Fuel Pump

Wolf ECU

18psi

3 Inch Exhaust turbo back

Didnt see that he already posted!!! Silva32 above!

[LTHLRB]

R33 S1 Manual

Stock bottem end and head

stock turbo

stock plenum

stock injectors

stock ecu

500hp tomeii fuel pump

3" dump to a big body high flow BOS cat

trust pe II cat back

gtr intercooler with some dodgey piping

metal intake pipe

apexi pod

catch can

turbosmart dual stage boost controller set to 11psi

209.5rwkw

new mods:

Greddy Profec B Spec II set to 11.15psi

future mods:

centre muffler taken out

slide r33 highflow

550cc injectors or gtr injectors

apexi pfc

im hoping somewhere over 235rwkw.

anyone know of good injectors GTR size or over that are straight drop in on rb25det? thanks

Edited September 30, 2006 by LTHLRB

[WogsRus]

Car: R33 GTST Series 1.5

Mods:

Walbrow GSS342 pump

Adjustable fuel reg

FMIC from CRD

Flyen 3' dump and 3' exhaust all the way through

$22 boost controller (spiking like crazy)

HKS Pod and intake

Stock Internals

Stock Turbo

managed [email protected] psi

the controller was spiking bigtime and then dropping off so it looks like time for a new controller, something good. The car pulls ok, but then hits a down spot and then takes off again. Goign to talk to the tuner see what we can do.

http://www.skylinesaustralia.com/forums/in...howtopic=137100

[shnaped_second]

R34 GT-T

Power Mods-

Basicly stock

Apexi pod

FGK 3" catback exhaust

Power-

213.8hp

[J Taylor]

Update on the RBZ. Went back on the dyno last night and did some more tuning and sprayed some nitrous to it. Laid down 595 rwhp (~444 kw) on 93 octane. Still internally stock motor.....stock headgasket, cams, and everything. AFR around 11.2:1

JT

[BEAR84]

Stock turbo, hi-flowed

Trust Type M intercooler and piping

Apexi Power FC

Apexi AVCR Boost Controller

Split engine and dump from Hi Tech Mufflers (3.5"), racing cat (5"), HKS Super Drager catback (3.5")

Bosch 044 fuel pump

Sard Fuel Pressure Regulator

Pod filter

Splitfire coil packs

238.5kw at the wheels at 14 pound

Tuned at CRD - they are the bomb!

[fEkuaR]

R33 GTS-T

Hi-flow Turbo

Apexi PowerFc + HC

Trust Turbo Back Exhaust + Split Dump

Bleed Valve Boost Controller set to 10Psi

ARC Sidemount Intercooler

Pod Filter + Cold Air Box

Made 281.4rwhp

The intercooler became a restriction at 280 rwhp so it was very safely and economically tuned at that point. Will upgrade intercooler at a later date and wind some more timing + boost into it.

Special thanks to Paul & Michael who tuned my car at Elite Automotive in Archerfield. I highly recommend Elite they are very good at what they do and fantastic to deal with. So if you in the area and want a good tune done they tune various ecu's so give Paul a call ..

If anyone has any questions please feel free to ask ill try get a photo of the dyno sheet up asap.

Edited October 21, 2006 by fEkuaR

[NicsR33]

Nissan R33 Series 1 GTS25T

3" Turbo back exhaust to twin 2.5" pipes

Apexi CAI

Bleed valve

JustJap FMIC

pulled 160rwkw on 4.5 - 5psi with huge misfiring problems. more boost + new sparks and a safc should solve this problem and hopefully be reaching ~ 200rwkw.

[khunjeng]

1994 GTST S1

1st Setup

Stock everything except for

e-manage

040 Fuel Pump

Stock boost

HKS super dragger zorst

168.8rwkw

2nd Setup

Custom Turbo setup- small, 1-1.3bar at 3k - yipieee

Apexi Dump Pipe

VG30 AFM

Spitfire Coil Packs

730CFM Hi-Flow cat

Unifilter POD and cover

Emanage

Bleed valve

257.1 rwkw @1.1bar

3rd Setup

As second plus

AVCR

PowerFC

SARD 550cc injectors

Twin plate clutch

HKS Adj Cam gears

272rw KW

r33camgears.pdf

[Bass Junky]

It's go live time. Thanks to the testers for giving the site a good shakedown over the last week.

Dyno Site

A few "rules" need to be followed:

1. Do not enter junk data. You can still view other people's graphs even if you don't have one of your own.

2. Do not sign up with crap details. If I see any dodgy logins created I will delete them, the car(s) and the dyno runs associated with those logins.

3. Do not forget your password. The password is encrypted in the database so I can't tell you what it is, and I haven't created myself a password reset page yet.

4. Report bugs to my email (zilla34 at gmail.com) with username and screen shots where possible.

5. Add suggestions for future enhancements in this thread.

Keep in mind, if this site gets abused I will pull it down.

Suggestions:

1. Sign up with the same username you have on SAU.

2. Add dyno type, location and shootout mode to dyno descriptions.

If there are any graphic designers who want to do some screen layout concepts send them to my email and I'll look at making it look pretty for version 2.0.

Have fun and play nice with it. smile.gif

Willo.

[Lithius]

Here's the page for entering your dyno data to compare it to other users.

http://sau.garagespank.com/login.php

And here's the url for talking about it, things which could be improved, results, problems etc.

http://www.skylinesaustralia.com/forums/in...howtopic=126563

[khunjeng]

Here's the page for entering your dyno data to compare it to other users.

http://sau.garagespank.com/login.php

And here's the url for talking about it, things which could be improved, results, problems etc.

http://www.skylinesaustralia.com/forums/in...howtopic=126563

way cool man...will add some details later

[time 2 race]

boost at 12 psi

front mount

pod

reg

stock ecu... for now...

turbo back

got 200 rwkw with miss fire.... just got a new turbo now to get ecu i want from 250 to 300 rwkw

[WHITER33GTS-T]

Got my car retuned with twin T3/T4 turbos, greddy plenum, 1000cc injectors and 80mm throttlebody. Car now makes 399.2rwkw at 17.4psi. Will try post up a pic of dyno sheet tonight

[shoebox]

1996 R33 S2 GTS-T.

Mods:

RB25DET engine transplant from R34

Spitfire coil packs

Apexi AFC Neo, RSM

Trust VSPL intercooler

Greddy profec b spec 2 boost controller

XForce turboback exhaust