Jump to content
SAU Community

Recommended Posts

R34 GT-T (NEO) '98 Manual

Stock Turbo

Greddy FMIC

Greddy Profec B EBC

Walbro Fuel Pump

Nismo 480CC Injectors

Greddy E-manage Ultimate

Z32 AFM

3 inch AM performance front/dump, high flow cat, 3 inch zaust.

Apexi Intake

208.3kw @ wheels on 12 psi on a 40 degree day.

UPDATE!

HKS GT2835 Pro S

Carbon Fibre Air Box with CAI

Tuned on 13psi made 244kw's at the rears. Injectors were maxing out and he wasn't gonna push more boost into it without either a bigger set or a FPR. Hoping for 270+ in the near future! :woot:

97 s2 33

stock turbo

stock ecu

stock internals

Tpiece set for 10psi

3 inch cat back

pod

trust fmic

Ran 228.3hp on dyno at powercruise was pretty hot at the time. no scanner handy to post sheet.

R34 GT-T (NEO) '98 Manual

Stock Turbo

HDI Hybrid FMIC

HKS Evc 5 EBC

Walbro Fuel Pump

OEM Injectors

Apexi Power FC

OEM AFM

OEM front/dump, high flow 4" HJS cat, 4" Futsitsubo catback

HKS Intake

Greddy style plenum

170kw @ wheels on 11 psi

Edited by Akis

very old dyno test.

october 2008.

96 s2 33

stock turbo

stock ecu

stock internals

Stock boost

3.5 inch cat back

pod

standard intercooler

hot day +35degrees

212hp/ 158.1rwkw

one of the best standard dynos ive seen

Same car as above ^^^ 2 months later hot day in summer30degrees and very humid

96 s2 33

stock turbo

stock ecu

stock internals

Tpiece set for 10psi

3 inch turbo - cat, 3.5 catback

pod

Just jap stealth fmic

192.5rwkw still a great result

R33 RB25

Standard bottom end.

Ported and Polished Head

HKS 256/264 cams

HKS GT-RS Turbo

Front Mount

Apexi Power intake

Apexi Power FC

Nismo 550cc Injectors

Nismo Fuel Pressure Regulator

Walbro Pump

Full zorst

Splitfires

Plazaman Plenum

Z32 AFM

337.1 rwhp (253rwkw) @ 1 Bar rev limited to 7000rpm - Ill scan and post dyno sheet soon

Same car. Same mods running 11psi on a different dyno...

310 rwhp(232rwkw) @ 11psi

R33 S2

HKS 2835 PRO S

Nismo 555cc injectors

Splitfire coilpacks

HKS FMIC

3" Turbo back exhaust

HKS Pod filter

Intank fuel pump

Wolf V500 ECU

359rwhp (268rwkw) @ 16 psi

Edited by SkyDragon

1997 R33 GTS25t

Unopened RB25DET, 165,000kms

Stock coil packs with some silicone goo to beef up insulation, stock intake and exh manifolds

BP Ultimate 98 Fuel

Nismo 555cc injectors

Walbro 255lb/hr fuel pumpfgvbbbb

GTSLink Plugin ECU

Apexi AVC-R boost controller with Norgren pressure relief valve aiding spool

Cheap random 600x300x76mm front mount intercooler

K&N filter with 4" intake

Garrett GT3076R .82a/r Internally gated turbo

Trust Power Extreme 2 exhaust

lith_dyno284.jpg

1998 R34 GTT

Standard RB25DET, ~112,000kms

Standard coil packs, 98 octane fuel, K&N pod, ARC front mount intercooler and trust exhaust

Standard turbo, injectors and ECU, Turbotech bleedvalve

219rwkw @ 12psi

Upgraded GT3071R turbo and Nismo 480CC injectors driven by Nistune Type 4 board

278.5rwkw @ 17psi

http://forum.nistune.com/viewtopic.php?t=950

Next up will be fitting cams and also some extra tuning for the VTC since theres a bump in the current dyno curve where it was left stock. Also looking into tweaking the factory boost control solenoid via factory ECU with variable boost control rather than using the Turbotech valve

Hey guys. got my R33 GTS-T Series II dynod last friday at R E

Mods,

Cooling Pro FMIC

Apexi Bov

Cat back exhaust

Gredy Profec B 2 boost controller 12 Psi

175Kw ATW

heres a vid to go with it.

R34 GT-T (Manual)

Blitz LM Pod Filter with Cold Air Feed

HDI GT Spec Intercooler

Custom 3" Turbo Back Exhaust

Stock Turbo

Stock Internals

Stock Boost Controller

207.9 RWKW @ 11 PSI

Installing PfC today and will chuck up DynoSheet After Tune! =D

R33 RB25

Standard bottom end.

Ported and Polished Head

HKS 256/264 cams

HKS GT-RS Turbo

Front Mount

Apexi Power intake

Apexi Power FC

Nismo 550cc Injectors

Nismo Fuel Pressure Regulator

Walbro Pump

Full zorst

Splitfires

Plazaman Plenum

Z32 AFM

Gizmo EBC

337.7rwhp @ 16.5psi (the nipple on the compressor housing had blown its bung off, so it was holding 16.5psi, but running alot more fuel They said it was running extremely rich, and now i know why)

Dyno run from the weekend... pitty i found the turbo leak after this run lol

1255261231.jpg

And the computer screen of the 2 pulls....

1255470015.jpg

On the rollers at the Buddys fire car show

1255308417.jpg

1997 Series 2 R33 Manual

RB25DET

Nismo 740CC Injectors

Haltech E11V2 with Airtemp sensor & 3bar MAP.

Garrett 3076R(3037S) 0.82 @ 15psi

NGK Iriway7 Sparkplugs

Superspark Coils

FMIC with Stock piping

Turbotech Boost T

Full boost seen around 3.5k-4k rpm

2 Degrees Extra Timing

Car is making 265rwkw

Dyno sheet was taken after the 265rwkw run was done

post-a252105-262rwkw-Dyno-Sheet-Edit.jpg

Edited by Aberax
  • 4 weeks later...

s2 rb25det

hiflow turbo

sard 750cc

sard P/R

walbro H/P fuel pump

3inch turbo back

upgraded stronger acturator

ems

safc

frontmount

16psi makes 326hp at the wheels with AUTO just did the manual box made 378hp

then week later the turbo f##ked up so looking for upgrading to a gt3540 with .82

does any 1 think its laggy um and when does boost kick in

if some 1 can help us out cheers

if some 1 can help

Performance Modifications:

ACL Race Main Bearing Kit

ACL Race Conrod Bearing Kit

APEXi Power FC & Hand Controller

ARP Head Studs

Blitz Air Pod

Blitz Cat-Back

Chasers Motorworks Custom Airbox

Chasers Motorworks Custom Intake Piping

Chasers Motorworks Custom Intercooler Piping

CP Forged Pistons

Cusco High Pressure Radiator Cap

Cusco Oil Catch Can

Dayco Fan Belt

Dayco Power Steering Belt

High Energy Oil Sump (7L)

HKS EVC-S

HKS GT-RS

GReddy Oil Cooler

Monza Intercooler

N1 Oil Pump

N1 Water Pump

Nismo 740cc Injectors

Nismo Fuel Pump

Nismo Fuel Regulator

NGK Spark Plugs

Pivot Raizin Volt Stabilizer

Plazamaman Plenum

R.E.V I-Beam Conrod

Tomei Metal Head Gasket 1.2mm

Tomei Pon Camshafts (IN,EX 256 Lift)

Tomei Z32

X-Force Front/Dump Pipe

X-Force High Flow-Cat

Power Output:

280.4 rwkw on 20psi

R33

RB25DET

Standard internals

Standard Injectors

Standard fuel pump

Standard fuel pressure reg

jjr dump

jjr cat

3-3.5" apexi/jasma exhaust

pfc

boost tee

jjr turn flow intercooler

jjr oil cooler

apexi pod

plugs gaped at .8

187rwkw @ 12 psi on stock turbo

215rwkw @ 14 psi on hypergear high flow

P1851_21-11-09_1.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can't agree. If we hadn't all been brought up with the noise caused by the inefficiency of an ICE, no-one would actually ask for all that. An EV is like any other car, it just goes better. 
    • 2 more things I have to work out Easy one first...can anyone describe how to pull the fuel pump and sender from a 33? I can feel there is some sort of mount and clips but don't have a manual and don't know the trick......if not I'll spend some quality time in the boot witha lighter tomorrow. Second question is harder.  He had changed the upper plenum to a plazmaman but clearly got to a point with the vacuum hoses where he said "f**k it, I'm going inside for a beer" and never came back to that job because it was a mess. Am I right to think that I need: 1. Pre throttle (16mm nipple on inlet) to AAC's main 20mm fitting as the main pre throttle feed 2. ACC has a second 13m outlet joined to that 20mm fitting which I think is the pre throttle air supply for the cold start valve? 3. Cold start valve's outlet fitting then goes to Plenum (to bypass throttle?) There is some adapter on the back of the ACC with 2 fittings (13mm and 10mm), do I run the 10mm through a 1 way valve to the Brake Booster (4) and the 13mm back to a 13mm nipple on the Plenum as the Idle control (5)? 6. Run a 6mm vacuum line from the Turbosmart BOV to the Plenum? 7. Run a 5mm vacuum line from the Fuel Pressure Reg to the Plenum? 8. Run a 5mm vacuum line from the Turbosmart Boost controller to the Plenum? (Wastegate already has a pre turbo pressure source running to the solenoid then the wastegate on the other side of the bay)  Any help appreciated, the GTR is quite different setup and while the Stagea also has FFP it is different again. (And no Dose, I'm not pissing it all off and putting a ethrottle on it....)
    • OK, onto some questions to try and speed up the process a little. Does anyone know what core this Garret is? I know it is a high flowed standard turbo but nothing else about it. Tag says OK 0169J - 446179-5032 Same question for the injectors, I don't know what they flow and ideally can work it out before it hits the dyno, they are a mustard yellow side feed
    • Quick side trip into the engine externals, alternator and PS were in place including tensioned belts, but the PS was dry (my guess is he had the steering rack reco-ed). Filled it up with Transmax Z but it will need more bleeding once the engine is running no doubt. BTW I've said before, I don't know what kind of soft animals you have in the city, but out here they breed the rats tough. I bet they were disappointed when they tasted synthetic ATF.... Coilpacks are Splitfires with a factory loom in reasonable condition. I didn't pull one put I bet the spark plugs are new as its a new engine
    • Onto intake pressure test. I have a Raceworks (damn brand thieves!) pressure test adapter that lets you apply pressure through a standard tyre valve and comes with a pressure gauge.....I just blocked off the other end immediately before the throttle body. Applied 30psi....and the turbo intake immediately popped off with a bang. Sorted that but it was still leaking, turns out there is a pinhole leak at the BOV adapter that I'll have to find a local place to TIG up. I'm sure it makes SFA difference with such a small leak but I want it to be right. Everything else up to the throttle body was good. Also cleaned and oiled the KNX cone filter, and this is the AFM if anyone can identify it (car runs a PowerFC)
×
×
  • Create New...