Jump to content
SAU Community

identify this turbo

180athid

By 180athid,
in Engines & Forced Induction

 Share

Recommended Posts

RS500 Experienced

RS500

Posted
Posted

fair enough.

given the pics, it seems that it could be a HKS GT2540R as they were the only turbo in the HKS GT25xx series which cam with the A/R .50 compressor housing and the A/R .86 exhaust housing.

what flange does it have, GT25 or T3?

discopotato03 Grand Master

discopotato03

Posted
Posted

Unfortunatly the middle pic hides the core so cannot tell if its a ball bearing type . One easy way to tell is to count the bolts on the core side of the exhaust housing . Four bolts means bush bearing and six bolts means ball bearing . That turbos compressor cover is a TO4E .50AR . I forgot to see if there is a divider web between the turbine outlet and wastegate outlet . If it has this and the four bolt exhaust housing its a Garrett Hybrid . I have seen something similar to this but with a .60AR B cover from Garrett . For positive ID really need to remove the compressor cover and measure major and minor diameters . This will tell the whole story . I have not seen HKS use that .86AR exhaust housing and turbine combination on their 25 or 28 series BB turbos .

Chow DPO3 .

discopotato03 Grand Master

discopotato03

Posted
Posted

Fair enough so BB core with NS111 turbine . Still need to see comp wheel , unscrew the six bolts on the backplate adapter and carefully slide it off . If the major diameter is 76mm (3") its probably a 46 trim TO4E wheel making the turbo a HKS GT2540 . The only one of these I've seen was GTR specific and used a .64AR turbine housing and I think a T3 style compressor cover . It makes sense to use the larger housings for a single turbo application but most agree the 2540 is not a good pairing of compressor and turbine wheels . My own opinion is that turbine is best paired with the 60mm compressors ie GT2530 / GT28RS and whatever the GTR Skyline upgrade turbo is called .

Any how whip off the front cover and all will be revealed , Cheers A .

discopotato03 Grand Master

discopotato03

Posted
Posted

From HKS there are three versions of the 2540 all using the same core and wheels . The first has a T3 flanged .64AR exhaust housing probably aimed at RB20/25 for R32/33/34 . The other two have the 2540R designation and the difference is .64 or .86 AR T25/28 flanged exhaust housings . The two "R" versions are probably aimed at the Rb26 and SR20 engines .

Now the compressor wheel is 46 trim and should measure 51.7mm across the tips .

Your turbo may be that third version .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R32GTR R200 reverting from Nismo centre to stock

      By MBS206 · Posted

      It's about the same time for me from Bunnings, or the Fasteners. My big push away from takeaway food, and gluten in general keeps me away from the Bunnings Snags too! Weather up here, I've been out for two walks today in the beautiful sunshine. Had a few little drizzles, and some wind, that honestly, a tin of beans and I could compete on how harsh she blows Thankfully, being this bit inland, we're not getting anything much really. Will probably pick up a bit more when/if Cyclone Alfie decides to come ashore. A few areas in the GC though, and south into NSW are really getting smashed though! Right now, I'm just annoyed Alfie hasn't hit, as I'm not allowed to crack into the BBQ foods like the bacon and eggs until the Cyclone hits "In case we lose power"...
    • The Bogan
      R32GTR R200 reverting from Nismo centre to stock

      By The Bogan · Posted

      I love fastener joints, the price difference between them and joints like Bunnings or Super Cheap is amazing, and they either have exactly what you want, or they can get it to quick They have even given me some for free when I only needed a couple of specific size In saying this, I have paid premium for fasteners from Bunnings if they have the sizes I need, but only for convenience really, as my local is only 10 minutes away, the Sushi joint near them is also a consideration  How's the weather Matt? Stay safe mate
    • joshuaho96
      R32 update from 1990's spec.

      By joshuaho96 · Posted

      Wideband is worth setting up if only for tuning purposes. I would not mess with the ignition system unless there's a misfire. HKS crank trigger is popular out here for the relatively easily sourced Denso crank sensor, not a bad idea to install as well regardless of power level on a standalone. Boost leak test is worth thinking about. Oil pressure sensor tied to a fuel cut isn't a bad idea either. Getting the tune figured out is a good idea. Without putting eyes on it and getting under it there's no way for us to tell you exactly what it needs but most likely you're down to the last 10% that will make a big, big difference in how happy you are with the car.
    • PotatoCake
      Has anyone put in brand new full carpet? (not floor mats)

      By PotatoCake · Posted

      Doing a refresh of my 33 and can see a few websites stating they sell the entire main carpet for our cars, but they all have generic photos which is fine, i understand they are custom made to order.  Just seeing if anyone has got it done or had any experience with this, as i would only want to do it if the fit and finish was as good as oem https://carmatsdirect.com.au/products/moulded-carpet-or-vinyl-for-nissan-skyline-r33-1993-1998-coupe https://knoxautocarpets.com.au/moulded-carpets/nissan/skyline/skyline-r-33-1993-1998/
    • MBS206
      R32 update from 1990's spec.

      By MBS206 · Posted

      Any plans for E85? If so, add flex fuel sensor.   I'd probably add in the sensors I mentioned above if the Link will support using them for engine protection. With water pressure, you need to be able to effectively set it that "If temp > X, and pressure = atmospheric, shutdown" as at running temp, you should be able to read pressure in the cooling system. If pressure suddenly disappears, it means the water went some where, and this is a quicker reaction than waiting on water temp to go up (Which, can take a little longer than you'd like, considering it now has to wait for hot air to heat it up) Oil pressure, Oil temp, both would be on my list too if you're looking to add sensors. Wideband O2. And at least one EGT sensor. If you're feeling deluxe, put in individual runner EGTs. Single EGT sensor is more so forget about a specific number, get used to "What is normal EGTs", and then keep an eye on it, if it starts going away from "normal" it's a sign something is wrong (Also, things like the tune can still start going out of spec, but EGTs may not show it, for example one injector starts running leaning, so ECU richens everything up, now 5 out of 6 cylinders are rich, and running cool, with one cylinder lean and running hotter, so it's not perfect) Then there is your other things to look at non sensor related, but you may have already done, or have underway, and that would be things like building a sump for more oil, and better oil control under high G-Forces (Cornering, brakes, acceleration). Basically, the above is worth looking/thinking about, if the ECU can do protective stuff with it, and you continue to use it how you are (Drive it to the track, thrash it, drive home, repeat once every 3 to 4 months)
×
×
  • Create New...