Jump to content
SAU Community

Recommended Posts

I'm from perth.... so i'm still learning where *everything* is over here shop-wise.

anyways, i've got the whiteline works kit on my r33, which i got just before i left home..... after playing with it a little, testing out the car at the limit (prolly more mine than the car's!) i still feel like it snaps into oversteer very dangerously.

looking for a good place to set it up, as well as alignment etc etc that would be familiar to these kits.

I'm in Heidelberg.

Thanks!

B

Link to comment
https://www.sau.com.au/forums/topic/55921-good-suspension-place-ne-suburbs/
Share on other sites

There is one suspension place i recommend over all others - although it is in north melbourne.

Talk to Ralph at Trutrack Pty Ltd, 52-62 Leveson St., North Melbourne.

This company has treated me with the utmost respect (even though my car was nothing special), to the extent that Ralph test drove my car after he had his boys set it up, wasn't happy, and went through the whole process of putting it on the alignment machine (twice!).

Boy did the car drive well after that..

-Patrick :cheers:

Oh, the main reason it took so long to set up was that i had a very non-standard suspension setup on an old Honda. Also, they charge a fixed fee.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wouldn't look too hard at what they did with the R32 GTR in endurance racing in Australia... Lots of things weren't actually available from the factory in the way those cars ran them... Japan also followed what Fred Gibson was doing here with some of there endurance cars in Japan... Australia is also the reason for things like the Brembo brakes, and the change in the gearbox... And quite a few other tricks they used to pull. There's a few other SAU peeps still on these forums that will have heard the stories direct from Alan Heaphy, Fred Gibson, and Jim Richards when we were lucky enough to have a great dinner with them
    • For all the talk of "these parts are junk" I generally recommend OEM because it's really not as bad as claimed. I have never seen or heard of a case like the N63 where the oil returns completely clog with coked oil for example in ~10 years or less. Would it be nice if it were a straighter path? I guess, but most modern cars use a scavenge pump instead of a pure gravity return. Also the factory lines that would be relatively simple to convert to braided are generally speaking hardlines from the factory. I would consider braided line to be a regression, not an improvement. It's also been engineered such that all the hardlines have appropriate strain relief where needed. There's absolutely room for improvement, for example the HKS advantage heritage intake piping shows just how much can be done to make the turbos fight each other less in OEM twin turbo configuration and reduce compressor surge but it's rarely a simple/straightforward process. I recommend looking at what the group A/N1 cars did, generally speaking the changes they made were necessary and proven in endurance racing.
    • Yes, multi relays needed, and possibly a diode. I'm not actually going to think about it though.
    • So I'm confident in saying its TCS thing. My new cluster I never realized didn't even have bulbs in the TCS or Slip slots. Shining a light through the backside that black plate has nothing for it, unlike my original cluster. Looking at the service manual the only thing that stands out is TCS in relation to the vehicle speed, it has nothing to do with turbos. It sadly looks like I may just need to get the appropriate cluster.
×
×
  • Create New...