Jump to content
SAU Community

Recommended Posts

Swordfish

The biggest engine for the pocket 2 stroke bikes seems to be the 50cc ones then you get the 4 stroke 74cc one which come with 4 speed gear box. Some of the choppers have a 107cc engine that can reach over 100 clicks.

Yeah thats what i thought, but its here in a flyer. i know the one i'm getting is air cooled and the 100clicks are water cooled. didn't know about the 4speed box though, i'll ask the guy if he can get them.

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

:D denham get one.. and somebody please photograph him flying off at 90km/hr as the bike disintigrates around him, and/or gives him a fatal electric shock :D  

Ahh.. man they don't make cheap fad crap in china like they used to! :D

There are places that replace the bearings and all fasteners to aus standard parts so they dont disintrigate :D

They dont all come out of china now, some come from europe and uk but cost more obiviously which i am looking at getting.

This one looks preety sweet

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...me=STRK:MEWA:IT

This is straight from the brochure. Maintenance well can't say for sure as I havent riden it much. If you want you can borrow it for a week and let me know what you think (No pressure to buy after)

Model: AGB-18a

High Performance reliable 49cc single-cylinder, air-cooled, 2 stroke Engine.

Pull Start

10” Tubeless Racing Tyres

ABS Plastic Body

Front and Rear Wheel Disc Brakes

Front and Rear Suspension

2.20 hp

Chain Drive

Fuel/Oil Mixture (Ratio 25:1)

Muffler

55 km/hr

110 kg

Single cylinder

970 X 520 X 580cm

1070 X 370 X 650cm

24 kg

21 kg

what price are you looking for beefy?

And can you post a condition so i know what it looks like?

Do you know much about these bikes?

As the new Terminator ones with the front headlights and tach/speedo have the new cvt tranny but weigh 40kg compared to the 20kg of the older model but have same 49cc engine but say they will still do 60km/h like the old model? Is this shit?

I should have this one by the end of tonight

With 13inch rims

53_1.JPG

98_1.JPG

Or this one with 15's

db_1_b.JPG

They are the biggest pocket bikes available at the moment but have cvt tranny so they are just as quick as the smaller ones but more stable and better built, as i dont see myself riding the ones with the 10inch wheel as my knees will scrape the ground.

Yeah, we got some in a container at work for fun... The little water-cooled one is definately a rocket, bloody noisy though - the clutch is set for 8500rpm, runs to around 13000rpm..... They definately achieve 90km/h though, even with 100kgs on it!

But yeah, I would make sure anything you get has had the bearings and fasteners changed for AU spec stuff. One bike shot a front bearing within 30 minutes. The rest are in various states of destruction though.

Personally I was going to get the mini trail bike, I'm 6'4", although I had a go on the little watercooled one I don't think I was very aerodynamic with knees around my ears!

my old subaru sherpa had a 499cc carby engine, which was farkin awesome, I didn't have to register the car to drive it on the roads... and it seated 2 people comfortably. Shame it couldn't make it up a 30 degree incline without difficulty with the same 2 people in the car.

If I still had it I'd have given you guys a drag in it.

I went to savedirect today... saw some of their goods. This guy was riding a yellow pocket bike and full speed up and down the street, looked mad. He told me the one he was riding costs $800, 49cc Air cooled, Key ignition, Max speed of 60kmph.

What do you guys thik of em?? Reliable?? or a total waste of money?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys, planning to get 18x9 +25 in fronts and 18x10 +25 in rears been reading the whole thread and cant really find anything   Anyone know if these will fit a r34 gtt with no scrubbing or guard work needed?
    • They usually get made by hand as part of any such swap.
    • Was planning on getting an R35 MAF and the adapter, should this be okay? Also any idea where I could get my hands on an intake pipe?
    • I mean yes, if you're starting from scratch on an unknown engine yes you don't need to be doing all kinds of math in the background but if you're doing relatively minor changes like AFM + injectors + boost up with some aftermarket turbos it takes quite a bit of math if you want to do something like maintain OEM fuel + timing tables but compressed and then a bit more load scale up top. I think I've spent too much time working on big engineering nightmares though so I'm a big fan of trying to constrain the scope of whatever work I'm doing as much as possible and trying to get it right before moving on. For example, a local owner just did the usual E85 + single turbo conversion to his R32 GTR and nearly burned his car to the ground doing some spirited driving up the local mountains. Turbine is unshielded and too close to the hood insulation. It's tough to balance "just get the project done" and "seemingly small details can cause massive setbacks I'm not willing to deal with".
    • No idea about Neil's steering wheel, but I have the same behaviour in the Stagea. I doubt it has ever been messed with so might be normal. Indicating to turn right at a roundabout and correcting even a little bit to the left to go around will cancel the indicator. Never considered it an issue other than it being a bit odd.
×
×
  • Create New...