Jump to content
SAU Community

PowerFC ECUs w/ Hand Controllers (NEW & under $1000!)


Recommended Posts

UPDATE:

I bring good and bad news. First, the good: Brent has already heard back from the supplier. Now, the bad: there are significant supply problems for PowerFCs at the moment (whadda know, just my luck). Apexi is very low on stock.

This is how it breaks down:

  • BNR 32/32 89/8- 98/8 RB26DETT PFC 414-N029 H/C 415-X001

2 units will be available at the end of November; 2 at the end of December.

  • ECR33 93/8-98/4 RB25DET PFC 414-N012 H/C 415-X001 Series 1 & 2

These units are very scarce at the moment. Units will be ready by the end of December.

  • S15 99/1-02/7 SR20DET PFC 414-N018 H/C 415-X001

These are in stock.

  • RPS13 94/1-96/7 SR20DET PFC 414-N015 H/C 415-X001

This is available.

  • 180SX RPS13 91/1-93/12 SR20DET R/ HEAD PFC 414-N014 H/C 415-X001

Units will be ready by the end of December.

  • SILIVIA PS13 91/1-93/9 SR20DET R/ HEAD PFC 414-N014 H/C 415-X001

These are available.

  • RX7 FDS 1- 3 91/12-95/11 13B-REW PFC 414-Z004 H/C 415-X001

This is available.

Now the obvious question is: how long are people willing to wait to receive their PowerFC(s)? I imagine some people are only prepared to wait 2-3 weeks, whereas for people like me, its not a huge issue.

The problem is that Apexi doesn't seem to have any stock. Except for those stores actually sitting on stock, I am led to believe we would have much the same problem ordering elsewhere.

I need to know who is willing to wait (where there is no supply), and who isn't? Please contact me and let me know.

Assuming we still have the numbers to go ahead a final price will be given on Tuesday November 30, and payment will need to be made between Wednesday December 1 and Friday December 3 (and must be recieved by Friday).

Sorry it isn't better news.

Lucien.

  • Replies 247
  • Created
  • Last Reply

Top Posters In This Topic

if anyone pulls out of this count me in as i am very keen and have the cash!

spewin i missed out of the group buy, as i only joined this forum today!

Why has Brent waited until now to say he doesn't have stock of Power FCs?

Is it possible to pay when he actually receives stock, instead of paying $1000.00 now and waiting two or more months for delivery?

Thats true.. when he offers a group buy of more than 20, it would have been good to make sure he can get 20 first :D oh well we see how long we have to wait!

Price drop by $100.00 for every month we have to wait... :D

At least it'll give me some time to work on the EBC bulk buy.

I think my second order will be cancelled, but I'll still be in for one. I'll get back to you with confirmation though.

Guys,

I will answer all the PM and emails tomorrow: I am taking the night off as I am tired and don't feel particularly well. Moreover its better for me to just sit down and go through everything in one hit tomorrow than some tonight, and some tomorrow.

babs: I will PM you.

Apologies to anyone that tried to call me this afternoon: my phone decided to turn itself off (anyone with a T86i would know about this particular 'bug').

Lucien.

umm instead of paying it all up?

how about we pay like an initial deposit to confirm our intentions of buying one and when brent actually has them ordered, we pay the rest of the money. So we feel more secure about our money, and he feel safe about us not pulling out, at least if we do, we lose the money or something.

Say pay 500 of the initial price...

just an idea, coz paying 1000 now and then waiting a month for it, i rather pay 500 now, use the other 500 for something productive...den make another 500 to pay the rest of the pfc off..!!!

If Brent agree, I'd go with deposit system. At least it shows our intention to pay the full amount as soon as item is available in stock. I know I do want one!

Right,

I was going to post this yesterday evening but the forums disappeared.

Is it possible to pay when he actually receives stock, instead of paying $1000.00 now and waiting two or more months for delivery?

No because Brent is required to pay upfront when he places the order with the supplier for all the units, which would be next week. He isn't willing to, or capable I imagine, or paying for $36k of stock upfront on promises of payment.

I think my second order will be cancelled, but I'll still be in for one. I'll get back to you with confirmation though.

Can you let me know?

how about we pay like an initial deposit to confirm our intentions of buying one and when brent actually has them ordered, we pay the rest of the money. So we feel more secure about our money, and he feel safe about us not pulling out, at least if we do, we lose the money or something.

Say pay 500 of the initial price...

just an idea, coz paying 1000 now and then waiting a month for it, i rather pay 500 now, use the other 500 for something productive...den make another 500 to pay the rest of the pfc off..!!!

Again, Brent needs to pay for the full cost of the order upfront at the time its placed. In this senario he would have to cover $18k worth of order on his own, and he is not willing to do that.

In fact, this is exactly what Brent said:

People may say. "I will just pay at the end of the month" It doesnt work like that. In order for those PFC`s & H/C`s to be made up they have to be paid for up front. ie I have to pay Apexi.

I have not heard back for a lot of you. Please let me know of your intentions. As it currently stands...:

I have moved this list to the first page

Those who are unkown, please contact me ASAP.

Again, sorry about the delay in my reply but more important issues cropped up in the last 24 hours and then the forums decided to die.

Cheers,

Lucien.

Sorry if it has been mentioned above, but I'm in a hurry...

When does payment have to be made/received by?

Also, are the units guaranteed for the end of December? What happens if it's mid-January and we're still waiting? Refunds, further discounts, or is that the risk we are taking?

List updated (see first post). Please contact me directly if you are unknown, or listed incorrectly.

To those who are asking to be included: please be patient, I want to try and sort out those who confirmed first, and then I will worry about others.

Sorry if it has been mentioned above, but I'm in a hurry...

When does payment have to be made/received by?

Also, are the units guaranteed for the end of December? What happens if it's mid-January and we're still waiting? Refunds, further discounts, or is that the risk we are taking?

If all goes according to plan, payment would need to be made by the end of this week.

As for guarantees, I doubt anyone can provide absolutes: I can't (obviously, I am just a buyer like you), Brent can't as he is dependent on the supplier, and the supplier probably won't. The point you raise is valid. I doubt further discounts would be forth coming (as that would mean Brent would be out of pocket), but I will ask what happens if things get delayed unreasonably.

I have made some enquires with Greenline to see if they have a similar problem, and initial indications is they may have more stock on hand but that ECR33 units are also tight, so as Brent suggested this seems to be a problem with the supplier (Apexi). I have asked for a few more details, but I am disinclined to switch supplier unless Greenline is able to supply significantly more units as I think it looks bad both for me and for the forum/club.

Lucien.

It looks bad for Nengun offering units they cannot supply, so if Greenline have the units in stock, then take our business there.

What is Greenline's web-site address? Maybe I will be able to sort out an EBC bulk purchase with them, considering Nengun only offer two different models (Power FC kit and AVC-R).

It pains me to do this, but I am going to call off the group buy. :(

My decision has been prompted by the unfortunate combination of short supply, the forthcoming Christmas and New Year period, and the necessity to pay now and wait for an unknown time.

I have spoken to Brent about regarding the concern about the time frame dragging out beyond the quoted dates. Not suprisingly he can't give any guarantees as he is dependant on Apexi and their ability to deliver on time is unknown.

Given the number of people who would be without units for a signficiant period and the sums involved, I do not think it is worth the risk of unhappiness should delivery times not be met. Brent seems to be of the same opinion. I would feel personally responsible if people did not receive their PFC/s by the end of December, and I would be powerless to do much about it.

I am very sorry to have got people interested and hopeful. In hindsight, had I been aware of the possible delays I would never have suggested the group buy, but I only found out a few days ago, all of an hour or so before you did.

Evidently despite agreeing to continue, a number of you have significant concerns about delivery times: this has been expressed to me, and directly to Brent by some people.

Again, you have my most sincere apologies. If I could do something to speed up delivery I would, but at the end of the day I am in exactly the same situation as you: just a buyer in the groupbuy.

Brent has suggested that we wait until the new year and try again when supply is hopefully more available, and there isn't the prospect of holidays, etc. It is evident that there is significant interest in such a groupbuy so I encourage people to consider putting another groupbuy together. I, however, will not be doing it. Not to beat my own drum, but I have spent countless hours on this groupbuy and the prospect of having to do it again is not very appealing.

That's about it. Thanks again for your interest and I am sorry the result has not been more positive.

P1E: Greenline expects a delivery soon, but they were extremely vague on just what they could supply. Units from the delivery are already allocated so its hard to say just how many would be available. I am yet to hear back from them when I replied asking for more details.

Lucien.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
    • Hope the cans went down well at least 
    • 255 can't go wrong with the price.
    • When I was replacing my pump due to being stranded in the wrong state, I went with the Deatschwerks 320lph kit. It is a direct plug in to the stock wires, harness, everything. It comes with a plug... but you can plug the OEM plug directly into this thing. https://justjap.com/products/deatschwerks-dw300-fuel-pump-nissan-s13-silvia-r32-r33-r34-skyline-c34-stagea?currency=AUD Downside: Won't actually flow that much on boost if you want to push it on E85, but it's comparable to the 040/255 etc. Little more actually.
×
×
  • Create New...