Jump to content
SAU Community

PowerFC ECUs w/ Hand Controllers (NEW & under $1000!)


Recommended Posts

UPDATE:

I bring good and bad news. First, the good: Brent has already heard back from the supplier. Now, the bad: there are significant supply problems for PowerFCs at the moment (whadda know, just my luck). Apexi is very low on stock.

This is how it breaks down:

  • BNR 32/32 89/8- 98/8 RB26DETT PFC 414-N029 H/C 415-X001

2 units will be available at the end of November; 2 at the end of December.

  • ECR33 93/8-98/4 RB25DET PFC 414-N012 H/C 415-X001 Series 1 & 2

These units are very scarce at the moment. Units will be ready by the end of December.

  • S15 99/1-02/7 SR20DET PFC 414-N018 H/C 415-X001

These are in stock.

  • RPS13 94/1-96/7 SR20DET PFC 414-N015 H/C 415-X001

This is available.

  • 180SX RPS13 91/1-93/12 SR20DET R/ HEAD PFC 414-N014 H/C 415-X001

Units will be ready by the end of December.

  • SILIVIA PS13 91/1-93/9 SR20DET R/ HEAD PFC 414-N014 H/C 415-X001

These are available.

  • RX7 FDS 1- 3 91/12-95/11 13B-REW PFC 414-Z004 H/C 415-X001

This is available.

Now the obvious question is: how long are people willing to wait to receive their PowerFC(s)? I imagine some people are only prepared to wait 2-3 weeks, whereas for people like me, its not a huge issue.

The problem is that Apexi doesn't seem to have any stock. Except for those stores actually sitting on stock, I am led to believe we would have much the same problem ordering elsewhere.

I need to know who is willing to wait (where there is no supply), and who isn't? Please contact me and let me know.

Assuming we still have the numbers to go ahead a final price will be given on Tuesday November 30, and payment will need to be made between Wednesday December 1 and Friday December 3 (and must be recieved by Friday).

Sorry it isn't better news.

Lucien.

  • Replies 247
  • Created
  • Last Reply

Top Posters In This Topic

if anyone pulls out of this count me in as i am very keen and have the cash!

spewin i missed out of the group buy, as i only joined this forum today!

Why has Brent waited until now to say he doesn't have stock of Power FCs?

Is it possible to pay when he actually receives stock, instead of paying $1000.00 now and waiting two or more months for delivery?

Thats true.. when he offers a group buy of more than 20, it would have been good to make sure he can get 20 first :D oh well we see how long we have to wait!

Price drop by $100.00 for every month we have to wait... :D

At least it'll give me some time to work on the EBC bulk buy.

I think my second order will be cancelled, but I'll still be in for one. I'll get back to you with confirmation though.

Guys,

I will answer all the PM and emails tomorrow: I am taking the night off as I am tired and don't feel particularly well. Moreover its better for me to just sit down and go through everything in one hit tomorrow than some tonight, and some tomorrow.

babs: I will PM you.

Apologies to anyone that tried to call me this afternoon: my phone decided to turn itself off (anyone with a T86i would know about this particular 'bug').

Lucien.

umm instead of paying it all up?

how about we pay like an initial deposit to confirm our intentions of buying one and when brent actually has them ordered, we pay the rest of the money. So we feel more secure about our money, and he feel safe about us not pulling out, at least if we do, we lose the money or something.

Say pay 500 of the initial price...

just an idea, coz paying 1000 now and then waiting a month for it, i rather pay 500 now, use the other 500 for something productive...den make another 500 to pay the rest of the pfc off..!!!

If Brent agree, I'd go with deposit system. At least it shows our intention to pay the full amount as soon as item is available in stock. I know I do want one!

Right,

I was going to post this yesterday evening but the forums disappeared.

Is it possible to pay when he actually receives stock, instead of paying $1000.00 now and waiting two or more months for delivery?

No because Brent is required to pay upfront when he places the order with the supplier for all the units, which would be next week. He isn't willing to, or capable I imagine, or paying for $36k of stock upfront on promises of payment.

I think my second order will be cancelled, but I'll still be in for one. I'll get back to you with confirmation though.

Can you let me know?

how about we pay like an initial deposit to confirm our intentions of buying one and when brent actually has them ordered, we pay the rest of the money. So we feel more secure about our money, and he feel safe about us not pulling out, at least if we do, we lose the money or something.

Say pay 500 of the initial price...

just an idea, coz paying 1000 now and then waiting a month for it, i rather pay 500 now, use the other 500 for something productive...den make another 500 to pay the rest of the pfc off..!!!

Again, Brent needs to pay for the full cost of the order upfront at the time its placed. In this senario he would have to cover $18k worth of order on his own, and he is not willing to do that.

In fact, this is exactly what Brent said:

People may say. "I will just pay at the end of the month" It doesnt work like that. In order for those PFC`s & H/C`s to be made up they have to be paid for up front. ie I have to pay Apexi.

I have not heard back for a lot of you. Please let me know of your intentions. As it currently stands...:

I have moved this list to the first page

Those who are unkown, please contact me ASAP.

Again, sorry about the delay in my reply but more important issues cropped up in the last 24 hours and then the forums decided to die.

Cheers,

Lucien.

Sorry if it has been mentioned above, but I'm in a hurry...

When does payment have to be made/received by?

Also, are the units guaranteed for the end of December? What happens if it's mid-January and we're still waiting? Refunds, further discounts, or is that the risk we are taking?

List updated (see first post). Please contact me directly if you are unknown, or listed incorrectly.

To those who are asking to be included: please be patient, I want to try and sort out those who confirmed first, and then I will worry about others.

Sorry if it has been mentioned above, but I'm in a hurry...

When does payment have to be made/received by?

Also, are the units guaranteed for the end of December? What happens if it's mid-January and we're still waiting? Refunds, further discounts, or is that the risk we are taking?

If all goes according to plan, payment would need to be made by the end of this week.

As for guarantees, I doubt anyone can provide absolutes: I can't (obviously, I am just a buyer like you), Brent can't as he is dependent on the supplier, and the supplier probably won't. The point you raise is valid. I doubt further discounts would be forth coming (as that would mean Brent would be out of pocket), but I will ask what happens if things get delayed unreasonably.

I have made some enquires with Greenline to see if they have a similar problem, and initial indications is they may have more stock on hand but that ECR33 units are also tight, so as Brent suggested this seems to be a problem with the supplier (Apexi). I have asked for a few more details, but I am disinclined to switch supplier unless Greenline is able to supply significantly more units as I think it looks bad both for me and for the forum/club.

Lucien.

It looks bad for Nengun offering units they cannot supply, so if Greenline have the units in stock, then take our business there.

What is Greenline's web-site address? Maybe I will be able to sort out an EBC bulk purchase with them, considering Nengun only offer two different models (Power FC kit and AVC-R).

It pains me to do this, but I am going to call off the group buy. :(

My decision has been prompted by the unfortunate combination of short supply, the forthcoming Christmas and New Year period, and the necessity to pay now and wait for an unknown time.

I have spoken to Brent about regarding the concern about the time frame dragging out beyond the quoted dates. Not suprisingly he can't give any guarantees as he is dependant on Apexi and their ability to deliver on time is unknown.

Given the number of people who would be without units for a signficiant period and the sums involved, I do not think it is worth the risk of unhappiness should delivery times not be met. Brent seems to be of the same opinion. I would feel personally responsible if people did not receive their PFC/s by the end of December, and I would be powerless to do much about it.

I am very sorry to have got people interested and hopeful. In hindsight, had I been aware of the possible delays I would never have suggested the group buy, but I only found out a few days ago, all of an hour or so before you did.

Evidently despite agreeing to continue, a number of you have significant concerns about delivery times: this has been expressed to me, and directly to Brent by some people.

Again, you have my most sincere apologies. If I could do something to speed up delivery I would, but at the end of the day I am in exactly the same situation as you: just a buyer in the groupbuy.

Brent has suggested that we wait until the new year and try again when supply is hopefully more available, and there isn't the prospect of holidays, etc. It is evident that there is significant interest in such a groupbuy so I encourage people to consider putting another groupbuy together. I, however, will not be doing it. Not to beat my own drum, but I have spent countless hours on this groupbuy and the prospect of having to do it again is not very appealing.

That's about it. Thanks again for your interest and I am sorry the result has not been more positive.

P1E: Greenline expects a delivery soon, but they were extremely vague on just what they could supply. Units from the delivery are already allocated so its hard to say just how many would be available. I am yet to hear back from them when I replied asking for more details.

Lucien.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thanks for that.... If only I could do something once and be happy with that, like some people do....
    • I had no transmission at all so I managed to find a big box manual gearbox from an R34 GTT for an insanely good price in EU. I converted it to push type which cost more than the transmission almost, with parts from Amayama! These engines are very strong and can put out decent power with a properly sized turbo. You can save on money from parts like pistons and rods, and invest those in the transmission and other parts. I suggest you join the RB20 Enthusiasts facebook group, plenty of info and almost daily posts there about 20DE/DET/Neo+T builds. (I hope I'm not breaking any forum rules by mentioning third party platforms, just trying to help the buddy out)
    • Yeah, having tried all of those methods including BBQ+recipro/hacksaw, I ended up buying a bush press kit under $150 that works well, like this: https://www.ebay.com.au/itm/355967727167?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=sfmmuhxgqhm&sssrc=2047675&ssuid=dJvnaZ11TB-&widget_ver=artemis&media=COPY It basically has a range of pushers and cups with threaded rods between to press out a range of large bushes. The problem with any sawing solution is minimising damage to the subframe side, although it probably needs a quick sand afterwards no matter what solution you try due to damage
    • Hi. Thanks for the answer. I do not have instagram 😄 I too considering turbo the RB20DE NEO 🙂 But i think i upgrade the gearbox first or at least buy new.  
    • Just pulled the passenger apart so got a good idea, also the side bracket that pivots the top half is completely cooked.. how I don’t know.. haha and paid $400 also included a photo of the passenger seat! She is mint
×
×
  • Create New...