Jump to content
SAU Community

Recommended Posts

My old man's a builder and I have had a fair bit of experience working with him, our place is currently undergoing some pretty major renovations. The Laundry, Bathroom, the Toilet, and bed rooms were all gutted back to bare frames. The hardest part of an extension with a stumped house is the floor and wall lines are never perfect anymore so it's very difficult to line up the new walls and floors! The bathroom is being tiled at them moment and looks awesome, laundry is done with a new storage room and we put down solid boards on the floor with hidden nails in the bedroom with the addition of a walk in robe. Overall it's a lot of work but the results are well worth while, just make sure that if your going to do it that your working with a realistic time line and not trying to rush it as trying to find time can be hard at times!

i've done 3 houses so far with my dad and believe me...it's true when people say "say goodbye to ur weekends" u spend every free day over there. i'm guessing u took a loan to help, if it's only for investing then u'll wanna get it done and sold/rented asap to reduce intrest. my advice, make sure u find a good builder who is competent and alway check everything they do...assume nothing. we haev had some bad experiences with this and believe me it's worth keeping a good eye on things, and make sure things are done exactly how u want them...don't leave any room for mis-understandings. also have fun with it ;)

I discovered the best invention ever last year after renovating an investment flat.

The place hadn't been touched (or cleaned) since the 70s and we didn't want to spend too much cos it was going to be a rental.

To make the bathroom look pretty we repainted the tiles using a special paint you can get at the hardware. It cost about $100 and turned the pink, brown and orange tiles to a nice vanilla colour :D

We also repainted the fake wood grain kitchen cupboards using a laminate paint, total cost was about $70 but kitchen was transformed!

In all it took us about 6 weeks from start to finish to get the place decent- like everyone says be prepared to give up your weekends and evenings, and avoid doing it with the other half/ family if you can help it!

I personally loved it and can't wait to do another one.

If your doing it yourself remember saftey first!

- Don't jump from heights as there may be a nail sticking out of the floor or scrape on the floor.

- If you have to yell wear earmuffs

- If your grinding don't set fire to anything( I set fire to myself when i was an apprentice...) and wear earmuffs+googles.(good idea to have fire extingser + first aid kit too).

- Get professionals to remove any asbetos(most buildings built before 1985 or so are riddled with this crap) or atleast wear a good resporator/wet the asbestos. This stuff is far worse than smoking and cancer can take up to 40 years to set in!

- If your working with fabricated materials such as mdf, particle board etc or treated pine/blackwood then wear a dust mask.

- All electrical work is to be left to the professionals(get them to check your tools whilw they are about)

- use a residule current device to plug your tools into 'cause when use cut through a cord it'll save your life as it did for me twice...

And no wearing of thongs(yes that includes the ladies...). Use steel capped boots, these have saved me a few times. And when your missues comes around to help with a skirt and titty top, slap her.

I hope this helps someone, its a very dangerous hobby/job to the untrained. Even after 5 years I still have accidents.

Dan.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...