Jump to content
SAU Community

Recommended Posts

http://www.meisei.com.au

On this site there are R33 GTS-T skylines for <15K and also have <100K on the clock. Maybe I'm missing something, but howcome they are so cheap compared to the ones in the for sale thread???

There were 2 in the thread for >20K. Not only that, but alot of ones in the thread have >100K on the clock and cost 3-4K more.

I know those are only price estimates on that site, but I doubt they'd under estimate the price by at least 1.5K!!! Let alone, 5K!

I'm just wondering if I have missed something, can someone please fill me in?

ie, thrashed? some tax I'm missing?

Or is it generally alot cheaper to import[and wait 4 weeks] then to buy straight away?

thanks

Dizzo

Link to comment
https://www.sau.com.au/forums/topic/56565-price-of-33/
Share on other sites

I had a look at their cost calculator. There is a gtst vehicle in their stock for $14,900, with 94km on the clock, manual. When I typed in the Free on board cost(569 000 yen) I got:

$15,599.73

and rounded to $15,750

But it says this:

"Please note that the final Landed and Complianced price is an estimate only. In working out the final price, the following items are taken into account:

FOB cost (for vehicles purchased from stock)

Final auction price plus auction agent's fees (for vehicles purchased from auction)

Shipping charges

Customs and Qurantine charges (sometimes AQIS require extra cleaning to be carried out - this may cost around $80)

Import duties & GST

Luxury Car Tax (not applicable in most cases)

Customs agent's fee

Meiseis brokerage fee

Towing from docks to compliance workshop

Cost of compliancing (correct compliancing cost is automatically chosen for each vehicle)

Cost of tyres (correct tyre cost is automatically chosen for each vehicle. 15 year old vehicles do not generally need new tyres, unless the tyres on the vehicle are worn or are not road worthy, eg. snow tyres)."

In the cost calculator though it is included 4K for compliance, and import duties are included as well at 15% of FOB.

Perhaps cars already here are over priced and when a buyer comes along they lower it alot?

Also, the estimate includes:

"Price includes A/C gas extraction and removal of freezer-dryer and valve prior to shipping. With certificate provided.

Please note: All modifications must be removed and most aftermarket items have to be replaced with stock items prior to compliancing."

Another question: Does one get these items back after the vehicle is complianced?

Link to comment
https://www.sau.com.au/forums/topic/56565-price-of-33/#findComment-1100450
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • i need a complete tail light for my R33 GTR if you have please let me know.
    • I need a great maintenance workshop around Idaho, if you know one please let me know..
    • Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
    • I'm mark from Idaho.
×
×
  • Create New...