Jump to content
SAU Community

Recommended Posts

hi fellow skyliners, i have a question, i was speaking to this guy who owns a R33 95 RB25 powered gtst practically standard, and he told me that his car has a different gearbox than mine, he reckons that his had a gtr box fitted to it when he bought it like that. now to my knowledge the gtr has a 4WD gearbox which mates up with the 2 diffs, and as far as i know if you were able to fit it to a rwd it would have a drive shaft hanging off it?? am i correct or is this guy just having a lend of me. thanks ppl for you time, and also what year/month did the R33 gtst series 1.5 stay in production till they changed to the series 2. thanks 85URK

Link to comment
https://www.sau.com.au/forums/topic/56732-gtr-gearbox-in-a-gtst-is-it-possible/
Share on other sites

i thought that internally the gearboxes were the same but the gtr box has the fittings on it for the transfer case? also cant you run a skyline gtr in 2wd by just disconnecting the front driveshaft from the gearbox? I dont know how this would go long term but this could be the case??

I could be wrong but thats the impression that I am under

cheers

Glenn

i thought that you could only do the 2wd/4wd switch in the R32 gtrs, but if you actually dropped the drive shafts in the front u mite be able to do it in the R33 gtr's, im not sure myself?? any1 else got any ideas?? he mite be having a LEND of me! (My mate that is)

another thing i just read was that there is a limited edtion R33 gtst?? does any1 know how to tell the different between the 2 of them?? as ive never heard of these before, there probably out there i just havent seen 1. is there any difference between the 2 and whats the easiest way to tell

Limited edition? Apart from the Series 1/Series 2 / Type M variants (which are pretty standard), there were some 1997 GTSTs with 40th Anniversary Skyline insignia, which included side badges, and trimming on the seats.

Only other limited release 33 I can think of is the Active LSD GTST. Easy to spot as on the dash there are lights for 'traction' and 'slip' - or something like that. It has the same diff that is in the GTR VSpec. There's a few people who have these cars on the forums.

is the only way to tell the 97 model series 2 by the front bar?? like do they all have twin round lights in the front bar (the round orange 1 and the round white 1) and do some of the series 2 skylines have the same front bar as the series 1.5?? or are they all got the twin round lights on each side.

oh yeah. no worries so they went series 1 from (93 or 94 not sure when they started - 95), series 1.5 = (95 - 96) series 2 = (96 - 97) coz my friend reckons his skyline is a 97 model, but it doesnt have the different front bar like the 97 models. mine is a 95 gtst with the square wing on the boot lid. and no round lights in the front bar only the clear indicators.

here what you "could"do....get a Getrag 6 speed from a supra and change the input shaft to a 34GTR one and run a 34 GTR bell housing/front case....93 onwards supra has a getrag V160/161 transmission and as do a 34 GTR...but they have a diffrent extension housing but the main trans is the same...ratios and all

i have a R33 gtst, and im asking bcoz a guy i know rekcons his skyline has a GTR box in his R33 gtst and i was wondering if he was bullshiting or not?? if its possible, and if it was would it be cost affective for some1 to do that. i think hes full of shit (i dont believe he has 1 in his if u could put 1 in anyway) i think hes just having a lend of me.

it woudlnt be worth it as internally they are similar and also the housing of a gtr gearbox if different, as is the floorplan of a gtr, so you would be stupid to fit a gtr box into a gtst it would be difficult and expensive.

also to clear some things up the 40th anniversary edition r33s were also sold in 1998(not sure if they were sold in 97, all the ones i have seen are 98 models)

if your friend has not got the correct front bar, it cant be a 96-97-98 model because the series two bar does not fit flush with the headlights on a series one.

your car would be a later 95 model, with the hi rise series 2 spoiler.

to check when his car was made just look at the australian compliance plate, it will state when the car was manufactured.

yep thats right the compliance plate will tell you, the japanese one does not have the date of manufacture on it so dont bother looking at that :)

also its not a series 2 if it does not have 2 air bags, and a different interior and steering wheel to yours.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I recently got their dbw 74mm throttle body and pedal kit. It is sensational quality especially the wiring harnesses. Unfortunately I can’t answer u about the fitment to stock inlet manifold as I’m going Rahjab Racing forward plenum. Only one thing to be careful of is understand u have to pay gst and import fees if your purchase is over $1,000 in one shipment.
    • yeah i agree paint match stops it from standing out so much, oh that's actually really good to know i was wondering if it would help with air flow now actually having an outlet in the bonnet. Will have to focus on ducting into and out of the radiator now to make the most of it.
    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
×
×
  • Create New...