Jump to content
SAU Community

Recommended Posts

Hello,

I have a serious problem with my R33 V-Spec which is :

4WD, ABS, A-LSD lights on the dash are on !!

(All these lights appears at once, i think they are related to each other somehow!!)

there is no power to the front at all.. i tried every possible thing (wire tracing, fluid level, broken pipes, fuse) but it seems that everything is fine while the 4WD not working ... im ready to start over again and again but could someone tells any ideas of where to check or what do i have to do ?? i really need help !!

Note: the attessa-pro system (in the back) is flashing a code... one blink every 3 seconds and its contonuisly so can someone tells me what does that error code means ??

Thanks :)

Link to comment
https://www.sau.com.au/forums/topic/57146-4wd-problem/
Share on other sites

checking tires pressure is one thing but ....

as long as i start on the engine the 4wd,Abs,-a-lsd are on

means : 4wd, ABS they turn off for one second and turn on again ( after i start on the engine ) .. i think that the 4WD is working but there is something stopping or forcing it to not work .

lets assume that your right and the problem is with the tyres pressure or the size .. how come that they turn on as soon as i start on the engine ( ATTESSA-PRO ) wont know that before i move the car for a while !!!

the lights are on as soon i start on the engine .. it should be a connector which is not plugged properly or a broken wire .. ( I think ) !!! so could you tell me which place is good to start tracing to find the problem ???

thanks

Link to comment
https://www.sau.com.au/forums/topic/57146-4wd-problem/#findComment-1106516
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah i agree paint match stops it from standing out so much, oh that's actually really good to know i was wondering if it would help with air flow now actually having an outlet in the bonnet. Will have to focus on ducting into and out of the radiator now to make the most of it.
    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
×
×
  • Create New...