Jump to content
SAU Community

Recommended Posts

Greg,

Chris is correct,Warren with the white gtr put some on the second to softest compound and he said he cannot believe the difference it makes.Thats on a gtr so one can only imagine what it would be like on a high horse power gts-t.

Regards,

SKYLINE (Kym)....

Link to comment
https://www.sau.com.au/forums/topic/57336-tyre-outlets/#findComment-1107505
Share on other sites

Blackwood Tyrepower is the distrubutor for TOYO's.

They have the cheapest RA1's available as obviously every one has to go through them.

How do the RA1's pull up against the RE55S?

From what I can see the RE55S have more of a semislick aggressive look.

Link to comment
https://www.sau.com.au/forums/topic/57336-tyre-outlets/#findComment-1111222
Share on other sites

The S in RE55S means seriously sticky like sh@t on a blanket. they reduce inherent understeer in the GTR and give better turn in. However the biggest improvement is with the reduction in power on oversteer also inherent bigtime in a GTR. I guess all those with a drift bent would see this as a handicap but those of us who like to chew on everything that goes around corners including motorbikes in the hills there is nothing like them. I bought the WT compound SOFT. There is a SUPER SOFT MEDIUM and HARD. I looked at all the other DOT rated slicks DUNLOP TOYO MICHELIN PIRELLI etc. The Bridgestone is almost half the price of all. This means you can wear out two sets for the price of one. Wish I had of known about the trackday I would have liked to worn them out

DOWNSIDE TO OWNING SEMISLICKS

1. ROAD NOISE

2. MOST OF THE TYRES ENDS UP ON THE CAR

3. NOT GOOD IN THE RAIN

Link to comment
https://www.sau.com.au/forums/topic/57336-tyre-outlets/#findComment-1111793
Share on other sites

In my 15 minute drive to work in the rain this morning my front torgue guage

was wrapped around the endstock and that was just getting out of the driveway.

A couple of weeks of accumulated oil and road grime wasnt helping either. Much more fun and 10 minutes quicker on the way home. One other word about the tyres there is definately less tramlining than with the Falkens I had on before.

Link to comment
https://www.sau.com.au/forums/topic/57336-tyre-outlets/#findComment-1113127
Share on other sites

The S in RE55S means seriously sticky like sh@t on a blanket. they reduce inherent understeer in the GTR and give better turn in. However the biggest improvement is with the reduction in power on oversteer also inherent bigtime in a GTR. I guess all those with a drift bent would see this as a handicap but those of us who like to chew on everything that goes around corners including motorbikes in the hills there is nothing like them. I bought the WT compound SOFT. There is a SUPER SOFT MEDIUM and HARD. I looked at all the other DOT rated slicks DUNLOP TOYO MICHELIN PIRELLI etc. The Bridgestone is almost half the price of all. This means you can wear out two sets for the price of one. Wish I had of known about the trackday I would have liked to worn them out

Where did you buy yours (tyres) from? How much? I do a lot of driving in the hills, and wish to get rid of the understeer problem you mentioned.. I am currently looking at a set of yokies, but if the RE55s are cheap, then I got more money to spend on my engine!!!

Link to comment
https://www.sau.com.au/forums/topic/57336-tyre-outlets/#findComment-1113964
Share on other sites

I had the old RE540s on the R33. They were great in the hills if the roads were smooth, but when they get bumpy & the rest of the time on the street they were such a pain I have got rid of them (of course, they had no tread left anyway!)

I have gone back to normal street yokos. Wont be quite as good for handling, but will make the car much more comfortable to drive.

I used to use Bridgestone in the city when Laurie was there. My last couple of sets came from Mag Wheel centre on Prospect Rd.

Link to comment
https://www.sau.com.au/forums/topic/57336-tyre-outlets/#findComment-1114678
Share on other sites

Sorry for the late reply, been away. I bought them from Bridgestone in Magill Road. They are the only Bridgestone Motorsport Tyre Outlet. Cost was $365.00 each fitted, did notice however they were having a 4 for the price of 3 offer in the EASTERN STATES when I was in Sydney during the week dont know if the same here ask. Even more to spend on your car. BTW cost doesnt change for different compounds in the RE55. I would like to go to a lightweight 18x9 rim, the RE55 comes in a 265/35/18 which wouild increase the overall diameter of the wheel/tyre by 7.6mm just enough to fill the guards a bit more and prevent gutter rash along with 10mm more gripping than the 255/40/17 I m running. The price goes up to $415.00 each.

Link to comment
https://www.sau.com.au/forums/topic/57336-tyre-outlets/#findComment-1118998
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The easiest option might be to just spray a bunch of fish oil in there.  At least that way you can feel like you've done something while you continue to ignore it
    • I'm firmly on the "zero compliance is good compliance" for FUCAs. I'd be looking to solid metal joints even if the primary reason for having them is because they facilitate the twist in the arm. I have never been more happy with the way the front suspension behaves than I have since I got rid of the FUCA bushes. Even the thin little (short lived) poly bushes in the Whiteline adjustables have too much compliance for my liking. It probably won't be long before I have sphericals nearly everywhere, probably including both top and bottom arms in the rear, and I'll start complaining about the increased costs for dental work. But I will be enjoying the driving more, I'm sure.
    • Plus, you'll get great experience in bedding in pads!
    • I have offset Nismo brackets so the fact the gktechs can pivot is less important to me. I have 170mm JIC arms with bushings - but they provide no adjustment and I'm not sure whiteline eccentric bushings will fit them (I don't want to ruin the bushings currently in them to find out). Ideally I want something with bushings + adjustment; hence why I'd like to find a pair of these. Unfortunately they aren't easy to find.
    • @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
×
×
  • Create New...