33 gearbox in 32

[DVS-8OR]

ive got a 33 box in my 32. everything is driving and working fine, except for the speedo. i got the gtr speedo in and all that. The speedo worked for about 5 mins and stopped. is it because i never changed the cable? im still using the original cable from my 32.

can anyone help?

[RB30-POWER]

Unscrew the cable from the speedo sender on the box and make sure the speedo drive hasn't broken. If you use the wrong cable this can happen.

[FLY-SKY]

wat is the right cable though?

[Bl4cK32]

The rb20 cable is fine

take out the cable from the sender on the GB, with the car on ramps, and stands. Then start the car, put in gear and let out clutch. Take a look to see if inside the end of the sender spins (where cable goes into), when it in gear. If it does, then you may have a dodgy cable.

If it dont spin when the car is in gear with the clutch out,...if like me:D, you have not secured the r33 speedo sender properly (red cog on the end of the gtr cable drive unit), then it has slipped off, and is not sitting where it supposed to...( not reading speed from gb)

see my thread http://www.skylinesaustralia.com/forums/sh...ead.php?t=49866

[Shaun]

I was just reading your posts; are u talking about GTR's or gtst's? I just put an RB26 with an R33 box in my R32 gtst and i cant figure out how to get the speedo working. The R33 is aparently electronic and the speedo drive from the RB20 gearbox wont fit in the R33 gearbox. WTF? Any help would be appreciated.