Jump to content
SAU Community

HELP - Electrics r32

raz0r$harP.UK

By raz0r$harP.UK,
in Engines & Forced Induction

 Share

Recommended Posts

raz0r$harP.UK Grand Master

raz0r$harP.UK

Posted
Posted

Hey I started my car this morning and my radio and clock on the speedo dont work. They were both working fine and i have tested all the other electrics in the car which are working fine. So im guessing its a fuse which is blown. I looked at them all and the appear okay but i dont know which one is for the clock and the radio??

Could someone point my in the right direction.

its a r32 gtst

Thanks

Link to comment
https://www.sau.com.au/forums/topic/57611-help-electrics-r32/
Share on other sites
daler32 Proficient

daler32

Posted
Posted

yea in the same boat here i picked up my car yesterday its got a momo wheel on it was drivin it around today and the horn was beeping for no reason anyone know if its cos of the momo wheel install or if its a common prob with r32s?? and anyone know how to decipher the fuse diagram??

BHDave Grand Master

BHDave

Posted
Posted

The horn problem will be due to a short in the wiring running to the seering wheel. Remove the horn button and check that the horn plug is hooked up and not rattling around inside the wheel causing the problem.

I had to rewire the horn in my last car as i was getting the same problem when i went over a bump the horn would go off.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 GTR EV? The leaf of the Godzilla's!

      By GTSBoy · Posted

      Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Butters
      UniClutch

      By Butters · Posted

      Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • joshuaho96
      R32 GTR EV? The leaf of the Godzilla's!

      By joshuaho96 · Posted

      Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • RB2533
      UniClutch

      By RB2533 · Posted

      Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • Duncan
      Rv37 400r questions

      By Duncan · Posted

      My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...