Jump to content
SAU Community

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

sending it tuesday morning. Dont think the post office is open on monday

everyone else

Im picking up coolers on tuesday and sending them tuesday. if you want one let me so I we can trade details.

are they genuine hybrid intercooler?

Hi Guys

My mate has just landed a few thousand hybrid intercoolers. 600mm x 300mm x 76mm. These coolers are exactly the same design as the original hybrid manufactures. The specs you see on those intercooler also applies here.. I will post up some spec soon.

Here are the specs

Attrictive polished aluminum look

3" inlet and 3" outlet pipes for high flow  

Low pressure drop 0.2psi at 15psi of boost

80 psi for up to 800 horses

Made by lightweight but strong material. Same Structure and material used as famous "Hibrid" Intercooler. Weight ~8kg

All coolers have been Pressure tested.

15 bars core design. For more efficient air flow over the older 16 bar design.

2 sizes

Size: 600mm x 300mm x 76mm

NEW PRICES

up to 5 buyer: $330

5 to 10: $300

10+: $295

Size: 450mm x 300mm x 76mm

NEW PRICES

up to 5 buyer: $325

5 to 10: $295

10+: $290

p&h: ~$25 to the east side of australia and $30 to the west.

As seen in the picture the cardboard box has polystyrene strips to protect the fins from transport damage. The cardboard box is even double up in places for extra strength.

Payment must be by Direct Deposit.

Local Pickup is available. Save p&h..

If you have doubt about buying from this group buy do a search for other groups buys with my name. Im sure you will find out quickly Im an honest bloke :D . Also if for some rare reason I can't get the parts and you have already transferred money to my account your money will be transfered back to your account straight away!!

Piping will be available soon for this intercooler. Soon I mean ~1 month..

EDITED Sorry I told a lie. these are genine hybrid intercoolers they came straight out of the hybrid factory!.. Actually right now I have the limited edition coolers. Be quick. and yes it does have the hybrid logo.

piping not available yet.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • At this point I'm just 'hoping' it's the turbo seals. I did speak to someone who said it's normal for these turbos to have a bit of axial play? Not gonna lie I've never checked a turbo for axial play before but you could hear it tapping a bit as I moved it back and forth. Surely that's too much? My theory is (could be completely wrong), bad axial play, worn bearings, bad seals, oil into dump/compressor side, burns in exhaust = blue smoke. On a timing belt related note, my crank pulley was missing that front plate that sits in front of the timing belt. It's that metal round plate. It did have the rear one, and the woodruff keys are in the crank which was nice. Can anyone confirm if the NEO det engine has a front plate, im sure it would to protect the front of the timing belt or something. Water pumps...the pump I got was an NPW (yes grill me if I should've got a genuine one lol). It has a smooth mating surface, kit came with a pretty pathetic looking paper gasket. Do I need to use any RTV or just trust the gasket will work because its a smooth mating surface? Cheers legends have a good Easter break!
    • Cheers man, I thought the same.   Bit of an update on it all. It was definitely blue smoke, not grey after all. It didn't really smell oily but it was blue after all. Also puffing just the smallest amount on idle with no throttle.   I ended up pulling the intake and exhaust off and there was around 3mm of axial play on the turbo shaft. So I figured we'll that's buggered and sent it off to get hi-flowed at hypergear. Haven't got it back yet.   I haven't compression tested it yet. Had a look in the cylinder and cylinder 1 spark plug, looked a bit sooty but not oily. Then I've just started doing my timing belt because it's age is unknown.
    • In that case it is probably stock. It lives in the navigator side footwell behind the plastic trim just in front of the a pillar.
    • Good question, I don't really know tbh...I'm pretty stock thought, where could I check this?
    • This. I'm confused by the whole discussion. The only reason you would have a car with e85 only if it was track use and you only ever used e85. All other use cases you add a flex fuel sensor, do the flex tune (you only need to do a couple of % and then interpolate the rest) and then you put whatever the hell you feel like including a mix in the tank and it just works. Want a long drive? fill with 98 Want max zoom? fill with e85 Got a half tank of 98 then find e85 somewhere? Throw it in.
×
×
  • Create New...